Victor D January 28, 2017 for Model Number MFI2569YEM0 Buttons started to flash periodically on front panel. Now, refrigerator is not working and all display lights are out. If you push any button they all come on. I ordered a replacement main electric panel and when installed , the buttons on the front panel would not even power up. I reinstalled the original main power board and the front panel lights up when pushed but fridge is not working. Do I need to replace the low voltage board?
1 Answer Victor, You will want to check the wire harness at the top of the door and make sure that there are no loose or damaged wires. If this checks ok then the issue would most likely be the low voltage board. Read More...
Dan June 10, 2016 for Model Number Mfi2569veq1 Our control panel on the front periodically does not work. All push button lights go out at the same time. Refrigerator cooling and freezer work fine when front panel is not working. When panel is not working and we try to push a button (water or ice button) all buttons light and we hear a beeping noise. The color of the refrigerator is bisque. Do I need to replace the front control panel or something else? Thank you
1 Answer Hello Dan, This is most likely a power supply issue on the main board WPW10310240. Check the wiring connection at the door hinge for proper connection before replacing parts. Read More...
Fred June 05, 2016 for Model Number MFI2569VEM Hi, Re; Whirlpool Fridge. After two years in this house finally decided to connect the fridge water and ice dispenser to water supply. Once I connected everything and tested the water dispensing, I got three glasses of water and then it quit working. I powered down the fridge and reseated the connectors on the pcb on the back of the fridge and powered back up and it dispensed one glass and quit again. So far I have checked the following items. 1- Dispensing lever micro switch for continuity. ok 2- Reseated connectors on PCB above the dispensing lever. 3- Reseated connectors on PCB behind the fridge. 4- Applied 110 power directly to water fill valve and got water coming out of the dispenser. 5- Measured for power at the water fill valve while pressing water dispensing lever and got no power. All the lights and digital display is working. It appears to also making ice and dropping into the ice bucket but it does not dispense either one.
1 Answer Fred, The most likely cause for the unit to not dispense ice or water would be a Low voltage board on the dispenser is faulty and would need to be replaced. Read More...
Kris May 25, 2016 for Model Number WFI2569YEW1 The electronic panel on my refrigerator is not working and the refrigerator is not cooling anymore. I think it could be the electronic control panel, but cannot find where that is located. Are you familiar with this problem and can you direct me to the right schematic and part please?
1 Answer Hello Kris. WPW10312695 is the main board and it is located on the back of the cabinet on the unit. Read More...