Customer Questions and Answers for Main Control Board by Whirlpool

Hello Ben. You will need to order W10890094 for the HV board needed.

Hello Ben. You will need to replace the HV board on the unit. The model number will have to be verified on the units I.D. tag since the one listed came up invalid. This will be necessary to look up and specific parts such as the one you requested. Thank you for your patience and understanding in this matter. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. Here is a link to help you locate it. http://www.appliancepartspros.com/modelnumber_locator.aspx

Paige, You will want to check to see if code 0302 will work. This is the most common code for that control board.

Hello Russ. Try reprogramming the correct board again. It sounds like the program didn't take properly.

Hello Ike. You need to order WPW10310240 for the board needed.

Hello Chris. For your serial number you needed to order WPW10310240 for your unit.

Hello Chris. No, you need to program the board with the code listed on your model tag.

Hello Isra. WPW10310240 is the HV board you will need to order.

Ray, If the main control board W10890094 is not working then you will need to replace it. When replacing the board look under the front of the unit for the tech sheet which will have the board programming instructions on it.

Sony, You will want to check to see if the relay on the compressor is getting power to it. If there is power to the relay then the issue will be caused by a faulty start relay. If there is no power then the issue will be caused by a control board that may have arrived defective.