Nicole March 13, 2013 for Model Number 7920P047-60 (for the entire Jenn Air down draft cooktop) Hello - I have a Jenn Air Cooktop (model # 7920P047-60). I dropped something and broke the cooktop. I have a couple of questions: 1) Can you confirm that the part below would be the replacement cooktop I need? Cooktop Part Number: AP4363724 MFG Part Number: 7920P202-60 Made by: Whirlpool 2) If ordered today, and being shipped to Indiana - zip code 46106 - what is the quickest I could receive it and what would be shipping charges? 3) Do I potentially need to order any other parts along with this?. Thanks!
1 Answer Nicole, To advise you of the proper cooktop you would need, we would need the model number of unit. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
John N. February 04, 2012 for Model Number JED8430BDB Can you tell me what parts I need to order along with the glass top to replace my broken top? I have a JENN-AIR JEB8430BDB.
1 Answer Hello John! You will need the cooktop 7920P202-60 and vinyl tape WP71003485. You should be able to use the existing screws. Thanks! Read More...
Shannon January 28, 2012 for Model Number JED8430BDB Hello, We have chipped the bottom right-hand corner of our cooktop and were wondering if there is a piece of trim made that we could use to cover it and keep it from further damage? Thank you, Shannon
1 Answer Hello Shannon, we do not have any type of trim that you can use to prevent further damage. You will have to replace the top part number 7920P202-60. Thanks! Read More...
Healthyoptions August 01, 2011 for Model Number jed8430 is there an installation manual for this how do you get the old glass cooktop out. where are the screws? is the element inside the glass? thanks andrea
1 Answer Healtyoptions, Here are the instructions for removing the cooktop glass assembly, and the screws to remove the assembly are accessible once you remove the cooktop from the countertop. "Main Top Removal 1. Disconnect power to cooktop. 2 Remove cooktop from the installation position and place face down on protected surface. 3. Remove screws securing main top to burner box bottom. 4. Remove screws securing control panel box and conduit mounting plate to burner box assembly. 5. Remove main top. 6. Reverse procedure to reassemble, verifying that cooktop frame is properly aligned. Element Replacement 1. Remove main top, see "Main Top Removal" procedure. 2. Remove screws securing element clips to main top. NOTE: Element clips are positioned at numbered locations. If element clips are removed from element, note the locations prior to removal. 3. Disconnect and label wiring to element. 4. Replace element and reverse procedure to reinstall." This should help you through the repair. Good Luck and Thanks Read More...
Larry F. June 12, 2011 for Model Number Jen-Aire Model JED8430BDB Is the glass part number AP4362724? My wife broke the glass, how hard is it to change? Would I be better off buying a new cooktop or just replacing the glass? Can I do it with standard tools or is it a hard job? Thanks for your reply, Larry.
1 Answer Hello Larry! Yes, the cooktop is part number 7920P202-60. You may also need the vinyl tape WP71003485. Here is the manufacturer information on the main top removal, this should help you determine if you would like to repair the product. Hope this helps! Main Top Removal 1. Disconnect power to cooktop. 2 Remove cooktop from installation position and place face down on protected surface. 3. Remove screws securing main top to burner box bottom. 4. Remove screws securing control panel box and conduit mounting plate to burner box assembly. 5. Remove main top. 6. Reverse procedure to reassemble, verifying that cooktop frame is properly aligned. NOTE: Make sure the pieces of insulation, located in the front left and right rear corners, are put back in place. Failure to do so could create excessive cabinet temperatures. Read More...