Customer Questions and Answers for Dome And Blade Assembly by Whirlpool

Best Seller

Manufacturer Part

Dome And Blade Assembly

4.89 (64)

By: Whirlpool

Part Number: OEM18041106

Manufacturer Part Number: WP9704291

The Dome and Blade Assembly is an OEM part for Whirlpool blenders. This assembly includes both the dome cover and the blade, which work together to blend ingredients efficiently. The dome ensures that contents are contained within the blender jar while the blade chops, purees, and mixes the ingredients to the desired consistency.

Causes of a bad dome and blade assembly can include wear and tear from regular use, damage from blending hard or frozen items, or corrosion and dulling of the blade over time. These issues can lead to decreased performance and the potential for leaks.

Symptoms of a bad dome and blade assembly include:

Reduced blending efficiency or inconsistent results
Leaks from the base of the blender jar
Unusual noises during operation
Visible damage or dullness of the blade

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

$88.95

Compare At:: $104.96
You Save:: $16.01

IN STOCK

Ships Today Guaranteed

Add to Cart

Questions & Answers

For Whirlpool Dome And Blade Assembly (Part Number: OEM18041106)

Jeannine September 25, 2011 for Model Number RMSB5 Kitchen aid blender

Will the AP3085609 dome blade and upper coupling fit my blender? Kitchen aid model RMSB5.

1 Answer

Hello Jeannine! The Kitchenaid model RMSB5 is not valid. Kitchenaid models should start with KSB- the model given seems to be a refurbished model number. Please double check the model number and resubmit. At times, if you peel back the model number sticker plate the Kitchenaid model number plate will be there. Thanks.

Stan August 02, 2011 for Model Number ksb5sso-ss jar

When the upper coupling is assembled to the jar, is the blade supposse to spin freely or is it suppose to be hard to spin. also the rubber was being eaten or melted.

1 Answer

Stan, When the jar and blade assembly is assembled, yes the blade will be able to spin freely. Once you attach the jar assembly to the blender base, there will be some resistance, if you try and turn the blade. As for the rubber being eaten or melted, are you discussing the drive coupling WP9704230 on the base, or the seal for the dome/chopper WP9704204. Either way, that would indicate the chopper assembly is being jammed or overloaded, Good Luck and Thanks

Gil June 21, 2011 for Model Number 5KSB52EMY5

Hi, just got my new blender as a gift. Unlike many of the pics I see on the web, I can not take out the blade dome from the glass container. I can unscrew the sleeve and loosen the dome, but the blades are too big to go through the bottom of the can. Is this how it is supposed to be?

1 Answer

Hello Gil. Here are the instructions from the manufacture. Hope this helps. THE PITCHER OF THE BLENDER CLEAN For a light cleaning: Fill the cup with hot soapy water and put it on for 30 seconds. Remove the mixing bowl of the stand, disassemble the parts and rinse the mixing bowl and the lid with clean water. Dry the mixing bowl and the lid. The mixing bowl is in the dishwasher cleaned are. For a complete clean: 1. Once the mixing bowl of the blender and remove the locking collar counterclockwise by him of clockwise. 2. Remove the knife from the mixing bowl (the set is not complete of the mixing bowl removed) and take place between the bottom flange of the knife and the seal by the seal of the bottom flange to move away. This allows the seal completely cleaned.

Jennie June 09, 2011 for Model Number KSB5MC4

I have a Kitchen Aide Blender that was working fine after I replaced it with a new Coupling, but now, the Drive Coupling has stopped spinning. Do I need to replace the seal on top of the motor or replace the Dome and Blade Assy? Or just what do I need to do, to start the coupler spinning again! Thank you for your recommendation! Jennie C

1 Answer

Hello, This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair: http://forum.appliancepartspros.com/blender-repair/62084-how-replace-coupling-kitchenaid-blender.html . Hope you find this information helpful, thanks!

Sandra April 21, 2011 for Model Number KSB5BU4

This blender starting leaking soon after purchase. Works fine but leaks liquids through the center shaft & accumulates underneath along with grease that I have to be careful not to get in the food when pouring. I'm hoping (since I paid $100 for it) that a new cutting assembly will eliminate the problem. Is AP3085609 the right part and do you think it will be worth a try? I'm surprised at the price being so high.

1 Answer

Hello Sandra. If it is leaking from around the dome and blade assembly, then this should resolve your problem. Verify that the unit is leaking from this part if you can. Hope this helps.

Peter G April 21, 2011 for Model Number KSB5GN3

Hello, On my KitchenAid Blender (model# - KSB5GN3)On the dome/blade, upper coupling, the blades & coupling key on the bottom are spinning separately. I can only surmise that the shaft in between them has snapped. Doesn't seem to be a way that I can see to maybe disassemble it and replace the shaft. I'm guessing that I'll just have to replace the whole assembly, which is no problem. Am I right? If you have any suggestions for me, I would be most grateful. Thanks in advance, Peter G

1 Answer

Hello Peter. From what your describing, you will need to replace the assembly. They do not offer just the shaft. Hope this helps.

Guest February 17, 2011

Well mine looks like this but but it is eating up the rubber it is sitting on

1 Answer

Can we have the model number to locate the correct part?

Have questions? Ask our pros!

Call us 1-877-477-7278

Need Help? Chat with a Pro

Or ask a question by filling in the form

Share your thoughts with other customers

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Customer Questions and Answers for Dome And Blade Assembly by Whirlpool

Dome And Blade Assembly

Questions & Answers

1 Answer

1 Answer

1 Answer

1 Answer

1 Answer

1 Answer

1 Answer

Have questions? Ask our pros!

Or ask a question by filling in the form

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Customer Questions and Answers for Dome And Blade Assembly by Whirlpool

Questions & Answers

Have questions? Ask our pros!

Or ask a question by filling in the form

Ask your question