Lawrence February 25, 2024 for Model Number CWG3600AAB ser #15964 66uh what is the correct hinge number for this model, also what needs to be done to replace it? also is there a spring available for it? is can you provide a part # for it
1 Answer Lawrence, The hinge part number will be 74004059 and it comes with the spring. As far as replacement, You will need to pull the wall oven out of the wall and remove the door and side panel to access the hinge to replace it. Read More...
Jerry D. November 20, 2021 for Model Number Whirlpool GW399LUXUSO5 I will need to change the oven hinges on my Whirlpool oven GW399LUXUSO5. Can you tell me how I would go about changing this hinge? Any tips are appreciated.
1 Answer Hello Jerry, To replace the door hinge on this unit you will need to lift the door off the hinges. Pull the unit out and once out remove the rear panels. You will then need to remove the screws for the side panel and the control panel where it attaches to the top. Once this is done you can slide the side panel off and access the hinge. Read More...
Carol April 23, 2020 for Model Number Kenmore / Sears Country Kitchen Electric Range This is a vintage stove (circa 1968-69) that looks like an antique wood burning stove. Model # 143.660670. I need new/replacement oven door hinges for this stove.
1 Answer Carol, unfortunately, the hinge assemblies 4040 and 5175 have been discontinued by the manufacturer and are no longer available. Read More...
Moe January 22, 2020 for Model Number GY397LXUS03 I want to replace the oven door hinges since door won't close all the way. Will I have to take the sides off to do this? Thanks, Moe
1 Answer Moe, Yes, to be able to remove the door hinges on the unit you will need to remove the side panels. Read More...
David N. February 01, 2019 for Model Number 9112VUV What is the best way to replace the spring on a Magic Chef oven door?
1 Answer Hello David, First, you will need to make sure you have the correct springs. There are two "series" of this model. If your serial number begins with 17 or lower, the correct door hinges are 74001856. If the serial number begins with 18 or higher you will need 74004059. Remove the door by opening it to the broil position and lifting it up off of the hinges. To replace the hinges, the unit will need to be pulled out 6 to 10 inches. You will then remove the screws from the front that retain the hinges and pull them out from the side. Reassembly is in the reverse order. Read More...
Curt December 12, 2018 for Model Number GW399LXUS06 How do I replace the hinges on this Whirlpool oven ?
1 Answer Curt, To replace the door hinge on this unit you will need to lift the door off the hinges. Pull the unit out and once out remove the rear panels. You will then need to remove the screws for the side panel and the control panel where it attaches to the top. Once this is done you can slide the side panel off and access the hinge. Read More...
Sam November 15, 2017 for Model Number MERH752BAW Is there a right and left hinge and is the price for a pair or each. thanks Sam
1 Answer Hello Sam. There is no right and left. The hinges are sold individually WP74011141. Thank you. Read More...
Ray January 24, 2017 for Model Number JDS9860BDS Are both oven door hinges the same? Or are there right and left hinges?
Elizabeth R. May 01, 2015 for Model Number JDR8895AAS The door to the smaller top oven falls open I think I need a new spring..does the door take springs on both sides or just one spring? What part number do I need?
1 Answer Hello Elizabeth! Yes, there are springs on both sides. However, the springs are not available separate from the door hinge, WPW10202401. Unfortunately, this item has been discontinued with no further replacements or cross references available and our company is unaware of any other available sources. Sorry about that! Read More...