Peter August 02, 2019 for Model Number MGR6751BDB19 I need all of the orifices. Which part numbers do I need to order?
1 Answer Hello Peter, I'm sorry but this part WP5789A602-60 has been discontinued by the manufacturer and no satisfactory substitutions have been provided. Thank you for your patience and understanding in this matter. If converting back to natural gas from LP you would need to order one WP7527P021-60 for the left front and three WP74007961. The bake and broil burners are adjustable by turning them 1 1/2 to 2 turns counterclockwise. You would also close the air shutters to about 3/4 inch. Read More...
Joe May 21, 2015 for Model Number JDR8895AAS Hello, I see you already have posted the correct Holder orifice for this stove. I'm converting back from Propane to Natural Gas is there any other parts required besides changing the jets? The propane conversation kit comes with six jets just curious this is a five burner stove.
1 Answer Joe, This is a LP kit that would work for several units and this is the reason for 6 orifices. In order to convert back to natural you will need to change the orifices on the burners. Flip the regulator cap from LP to Natural and conversion will be made. Read More...
Landon January 26, 2015 for Model Number JDR8895AAS I need to replace all five orifice holders on my jenn air free standing range. Can you tell me the sizes and numbers I need to order? Thank you
1 Answer Landon, You will need the following orifice holders for your range. These are listed as to location and part number: Left rear 9.2K btu WP74007961, Right front 12.5K Btu WP7527P028-60, Center and Right rear 5K btu WP7527P023-60 and Left front 16K btu WP7527P021-60. Read More...
Pedro March 09, 2014 for Model Number MGR6875ADQ Dble over with 5 burners I need to replace 3 Orifice holders on this particular model with 5 burners. The sizes for the burners are as follows: 1 - Large - Front left 1 - Medium - Front Right 2 - Small - 2 back burners 1 - extra small - middle burner Please help me with the determine what the part numbers are for the Large, Medium and small orifice holders. I would like to order the parts today, along with the torx screw that comes with each item, if you have them in stock.
1 Answer Hello Pedro. The large 16k btu orifice is Part# WP7527P021-60, The medium 9.5k btu is WP74007961, and the small 5k btu is part# WP7527P023-60. The screw is part# WP3368921 Read More...
Carl Garant October 19, 2012 for Model Number rgb745weh2ww Where is the conversion switch for the oven and broiler?
1 Answer Hello Carl, your oven safety valve, regulator, and broil fitting should be adjustable. If you're converting from NAT to LP gas, your top orifices are available in kit# WB28K10556. If you are converting from LP gas back to NAT gas, there is no kit. You would need to order the NAT orifices from the parts list for your model. NAT - Med burner (2) - WB28K10022 NAT - SM burner (1) - WB28K10029 NAT - LG burner (1) - WB28K10030 Read More...
Matthew November 13, 2011 for Model Number mgr6875ads I'm looking for the wire that runs from the Orifice holder to the Spark Module. Also can you confirm which Orifice holder part numbers I'll need for all five burners in my model MGR6875ADS? Thanks.
1 Answer Hello Matthew! You will use two 9.2k orifice holders WP74007961, one 16k orifice holder WP7527P021-60, one 5k orifice holder WP7527P023-60, and one 12.5k orifice holder WP7527P028-60. The wiring harness for the ignitor to the spark module is part number W10202387. Thanks! Read More...
Phil May 20, 2011 for Model Number MGR6775ADW I need to replace the holder orifice's for this model. One is large, one small and the other two are the same. Is this the part number for the two that are the same? Also what is the part number for the screws to secure them? Part Number: AP4096730
1 Answer Hello Phil. Here are the part numbers for the holders: small WP7527P023-60, medium WP74007961 and large WP7527P021-60. It would seem that you will need to order a quantity of two mediums. The screw to mount the holder is WP3368921. Hope this helps! Read More...