Wayne March 13, 2014 Hi, AP4264081 is the part number I need for my Maytag dishwasher, but mine is white. Is there a part number for one in white? I need the latch with handle. Thanks for the help.
1 Answer Wayne, the same handle and latch assembly in white is part number WPW10130695. Thanks. Read More...
Matthew February 22, 2014 for Model Number MDB5600AWW The Latch and Handle on my Maytag Quite Series 100 is broken. Is MFG Number W10130694 have everything I'll need to replace it? Also the plastic cover around the handle/latch is broken, #1 on the part diagram. What is the part number to replace that? thanks.
1 Answer Hello Matthew. Yes, it has the handle and the latch. As for the other part, you will need to order the control panel 6-917707 on the unit. Read More...
Dale Beaman February 19, 2014 for Model Number gdf501pgdoww Door handle switch will not unplug. I cannot unplug switches.
1 Answer Dale, Using a pair of needle nose pliers, put the end of the pliers on the terminal just below where the connector is then push the connector off using the end of the pliers. Read More...
Daniela February 11, 2014 for Model Number Maytag Legacy series quiet series 200 I need the door latching handle. Please let me know what part to order.
1 Answer Hello Daniela! To verify the correct latch assembly used on your Maytag dishwasher we'll need the model number from the model/serial tag plate. Please obtain this information and reply to this e-mail for further assistance. Thank you. Read More...
Bruce B. January 31, 2014 for Model Number mdb7601aww The latch assembly is broken. Does the latch assembly come with the finger grip piece or is that separate? Are the microswitches already installed in the new part?
1 Answer Hello Bruce, The handle is included if you order WPW10130695. The switches are included with the door latch assembly whether you order it with the handle or not. Read More...
Charlie January 24, 2014 for Model Number MBD8600AWW My lock handle just dangles it is not connected, but i can still shut and run the dishwasher and open it .i need to fix this.
2 Answers Charlie, the WPW10130695 is a very good choice, you won't have to attempt to install a new handle on the new latch assembly. It's not a very difficult procedure. Disconnect power to the machine. Open the Dishwasher door. 3. Remove the 11 Torx™ screws along the sides and top of the Inner Door Panel. Separate the Inner Door Panel from the Outer Door. Disconnect wires from the Vent and Dispenser Wax Motors before pulling the Inner Door Panel away from the Dishwasher. Lift Door Latch Assembly out. Remove the wires from the original switches, install in the same location and configuration as the original switches, and reverse the procedure and test the dishwasher for operation. Read More...
Charlie January 24, 2014 for Model Number MBD8600AWW My lock handle just dangles it is not connected, but i can still shut and run the dishwasher and open it .i need to fix this.
2 Answers Charlie, the WPW10130695 is a very good choice, you won't have to attempt to install a new handle on the new latch assembly. It's not a very difficult procedure. Disconnect power to the machine. Open the Dishwasher door. 3. Remove the 11 Torx™ screws along the sides and top of the Inner Door Panel. Separate the Inner Door Panel from the Outer Door. Disconnect wires from the Vent and Dispenser Wax Motors before pulling the Inner Door Panel away from the Dishwasher. Lift Door Latch Assembly out. Remove the wires from the original switches, install in the same location and configuration as the original switches, and reverse the procedure and test the dishwasher for operation. Read More...
Sandy January 21, 2014 for Model Number JDB108AWS Jenn Air diswasher I bought a new latch assemble and before installing decided stupidly to test it on the latch and now the metal latch is stuck and I cannot install my new latch assembly. Is there a way to get the latch out? I tried connecting it and turning on the dishwasher but water started to flow and the door is apart so can't try that. Thanks for any help.
1 Answer Hello Sandy. You can use an ice pick and as someone squeezes the handle to release the latch, have someone else use the ice pick to release the latch. It works better with 2 people if you can do so. Read More...
Tom January 21, 2014 for Model Number Maytag dishwasher How do I disconnect the wires from the relay switches?
Sidney January 13, 2014 for Model Number mdbtt59awb I need the black latch for my undercounter dishwasher. Which is the correct part?