Becky November 01, 2015 for Model Number MDB7600AWW I need just the handle #99002579. I've bought several latches from you folks (yes, I've got THAT model, the one that breaks it's latch about every year and a half). But this time, only the handle broke. I bought two latches last time so I already have the extra latch. But the latches don't (or didn't) come with handles so I need JUST the handle. Do you sell just the handle? I don't need an extra latch, I still have an extra from my last order.
1 Answer Becky, Unfortunately the manufacturer has mad the handle as part of the door latch assembly and is no longer available as a separate part. You will need to get the door latch assembly WPW10130695. Read More...
Ton October 09, 2015 for Model Number MDBTT70AWW I require a handle (99002579) and assembly (99003347) for the above mentioned Maytag model.
1 Answer Hello Ton, You will need to order WPW10130695. It includes the door latch for the model number provided. Read More...
Janice K October 06, 2015 for Model Number whirlpool regal energy saver 7500 I cannot open my dishwasher door. The latch seems to be stuck in an upward position. I cannot get the information for the appliance model number, since the door will not open. Is there an emergency release that I can do to open it? I have unplugged it and plugged it back already too
1 Answer Janice, The only way to possibly get the door open would be to grab the door on either side and lift and pull at the same time. Read More...
Laurie September 18, 2015 for Model Number MDB9600AWB My door handle works...but is getting more difficult to pull to open the door. Do I need a whole door latch assembly? I really appreciate the videos!
1 Answer Hello Laurie. Yes, you will need to order and replace the latch assembly WPW10130695 on the unit. Read More...
Don August 25, 2015 for Model Number MDB6701AWQ41 The door handle broke and the door handle tabs on the control panel were broke. I replaced both the control panel and latch assembly with handle. The handle/latch assembly, however, pops out of the tabs on on the control panel when it is screwed down. The door still opens and closes and it works, but you have have to press in on the door once closed which I suspect is due to not being in the tabs so its not locking properly. How to I know the latch is in the right position (open/closed) when installing so that it also sits in the control panel tabs?
1 Answer Hello Don. As long as the holes in the latch assembly have the screws securing them, then it should be fine. If the screws are in there, it aligns the latch properly. Read More...
Glenn G. August 22, 2015 for Model Number MDB8600AWQ My door handle broke on the mentioned model. I ordered part # w10275768. Didn't realize that it didn't come with the handle (my fault). Do I have to buy a whole new kit or is there any place to just order the actual handle?
1 Answer Hello Glenn, I'm sorry but the handle is only available as a part of the door latch assembly WPW10130695. If you purchased the door latch assembly from us you can call us at 1-877-477-7278 for a return authorization with the serial number from your unit and get refunded 100% for the part, (I'm sorry but shipping is non-refundable). Read More...
Rich August 06, 2015 for Model Number MDBH945AWS I removed the back face to inspect and locate the broken latch. I ordered a new one which arrived yesterday. While waiting for the part I reinstalled the back face and when we ran it through a wash cycle the dishwasher made a grinding noise. I replaced the handle/ switch yesterday evening and with the panel off inspected inside but couldn't find anything suspicious. I then reinstalled the back panel and ran it through another wash cycle. The noise is still there. Handle works fine. Solution?
1 Answer Hello Rich. Check for something in the chopper on the unit and the impeller on the unit. It could cause the grinding noise on the unit. Read More...
Tim June 25, 2015 for Model Number Samsung DB3710DW Will this latch assembly fit a Samsung DB3710DW? I have a broken handle making it difficult to open.
Paul N. May 07, 2015 for Model Number MDBH980AWS I need a new latch assembly but when I cross reference to check capability, none of the latches offered match. All of the MDBH980AWS have a number after the 'AWS' ours doesn't.
1 Answer Hello Paul, We apologize for our compatibility tool. It is still in work and is still not recognizing all model/part numbers so at this time it should be disregarded. WPW10130695 should work as per the manufacturer. Read More...
Rik April 21, 2015 for Model Number MDBTT79AWW My door handle has broken twice, but even broken it has still been working, just a bit harder to open. The machine has worked with the broken handle for about 2 years. Today the dishwasher will not start. All of the buttons light up except the start. Should I first get a new latch assembly, or just get a new control panel to fix the problem. Thank You.
1 Answer Hello Rik. It would be best to replace the latch assembly WPW10130695 with the control panel 6-917713 on the unit. Read More...