Rick January 01, 2012 for Model Number 665, Also shows 15955793, Serial #FJ1715638 I have a Kenmore Ultra undercounter dishwasher. The rubber tube feeding the upper spray arm is cracked/cut open. Will this supply tube kit fit this model? I am not finding any rubber tubes like my model has.
1 Answer Hello Rick. Yes, based on the model number, 675808 is the correct spray arm kit. Hope this helps. Read More...
Lisa December 04, 2011 for Model Number 66516769000 I have a Kenmore Dishwasher and the mounting unit on the upper rack that holds the upper spray arm has snapped off on the extension part of the mounting unit. I ordered these 2 parts - even though the spray arm is not broken - AP3044177 and AP3115182. Do you think this will fix the problem and will fit my dishwasher?
1 Answer Hello Lisa. Yes, the tube kit 675808 and the support WP8268812 should repair the unit properly. Hope this helps. Read More...
Snowflake29 November 22, 2011 My top rack of my dishwasher is lower on one side than the other. I bought the upper arm spray kit and the new arm hits o the lower side of the top rack.
1 Answer Hello Snowflake29. We will need your model number to help you with this. Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Donna November 15, 2011 for Model Number KUDS24sebso The supply tube that fits under the middle spray arm of my 1998 KitchenAid dishwasher has a hole in it. It's a straight piece, made of soft rubber. The part I thought I would need is part 6 (AP3115182), but that appears to turn at one end. What part do I need?
1 Answer Hello Donna. Based on the model number you provided, 675808 is the correct supply tube for the unit. You have to replace the kit due to a design change in the spray arm. Hope this helps. Read More...
Wendy October 20, 2011 for Model Number KUDC25CH A follow up question to the one you just answered. But, the AP3115182 clearly does NOT come with part #5, which is AP3178206. Why does it tell me to consider also getting that part? Doesn't make sense to me. Thanks
1 Answer Hello Wendy. Yes, 675808 is a kit, and according to the kit, it has everything you need. You will need to look and see if your mount assembly is angled. If so, you do not need to order WP8539324. If not, you will need to order it. Thank You. Read More...
Wendy October 20, 2011 for Model Number Kitchenaid dishwasher KUDC25CH diswasher is about 12 years old. Arm, #6 in the diagram, needs to be replaced. Please confirm that I need to order AP3115182. This part says consider purchasing AP2920737. When I click on that number, it comes up with part #AP3178206. Seems to say that the existing part in my dishwasher won't work with the new parts I am ordering because the angle of the shaft has changed. Is this correct, and do I need to order the AP3178206? Also, are there any other parts that I would need that I am somehow not picking up on? Thanks
1 Answer Hello Wendy. No, you will need to order 675808. It comes with everything you need to install the part properly. Hope this helps. Read More...
J October 09, 2011 What is the part number for the inlet support bracket that holds the feed tube of the upper spray arm?
1 Answer Hello J. We will need your model number to help you with this. Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Puzzled August 17, 2011 for Model Number KUDS24SEWH1 You mention an "upper and a lower rack mount for the tube". All I can find in this list is the upper rack mount. What is the part number for the lower rack mount?
1 Answer Hello Puzzled. The tube 8193788 connects to the pump outlet 8194582 in the lower section. Hope this helps. Read More...
Puzzled August 17, 2011 for Model Number KUDS24SEWH1 All I really need is a new #6, according to the schematic you show. The part has been redesigned and I'm told I need AP3115182. Going to that part it tell me to consider purchasing AP2920737 because AP3044177 is no longer used. AP2920737 correllates with part #5 on the schematic. However, going to part #5 (AP3044177) it shows the replacement part as AP3178206. Are AP3178206 and AP2920737 the same? If not, what's the difference? Finally, do I also need to order AP3177983 (#2 on the schematic) or does the new part #AP2920737/AP3178206 incorporate this piece? I want to insure I have a complete order. Thank you.
1 Answer Puzzled, Everything you need will be in the spray arm kit 675808 , but you'll need to be careful with the upper and lower rack mount for the tube. You may want to consider having them on hand in case. Good Luck. Read More...
Kathy August 07, 2011 for Model Number GLD5800L0022 Will AP3115182 work for my dishwasher? Water comes out, but the arm doesn't go around.
1 Answer Hello Kathy. No, based on the model number you provided WD22X10046 is the correct middle spray arm. Hope this helps. Read More...