Tina June 25, 2013 for Model Number dishwasher, ultra wash, model 665 The upper spray arm on my dishwasher broke (Kenmore model 665, serial 5701891, stock 157) and although this part looks exactly like what broke off, the referenced bracket to attach it to the upper rack doesn't look anything like what is on there now.
1 Answer Tina, The middle spray arm and supply tube kit comes with a new bracket due to a change in the design. You will want to replace the bracket . Read More...
Donna B. April 30, 2013 for Model Number ?? I have a Kitchenaid whisper quiet ultima superba dishwasher and cannot find a model number. All I need is the upper spray arm supply tube. Can I get one that will work without the model number and without the spray arm?
1 Answer Hello Donna. Sorry, we will need the model number. Here is a link to help you locate it. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Stephanie March 12, 2013 for Model Number KUDS24SEBL3 The upper wash and rinse tube is falling apart as it is rubber. Since that part is no longer available I purchased 675808 but the tube is not straight at the end. How do you install this new kit? Do I use all the parts from this kit? Does it include everything that I will need? Need instructions how to put in new parts. Thanks so much!!
1 Answer Stephanie, There are no instructions for how the kit is installed unless one comes with kit. You will need to use all parts installed in the kit. Read More...
Holly February 01, 2013 I need a middle spray arm for my Kenmore dishwasher Ultra Wash 665, serial number 15805891, stock 15805 I cannot read the model number it looks like FL --3504504, cannot read the 2 numbers after the FL but the rest of the number is correct. Can you tell me what arm will work with my dishwasher? Thanks
Kathleen January 25, 2013 for Model Number 3384543 I have a ken more dishwasher, and this arm thing whatever it is called just broke. I need to know if I order this one or something else.?????? Thank you
1 Answer Hello Kathleen, If the center spray arm broke off then you would need to order the middle spray arm. The model number listed is not a valid model. To properly assist you we will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Duke January 21, 2013 for Model Number whirlpool quiet partner 1 w10289944a The dishes on the top rack will not clean.
1 Answer Hello Duke, You should check the filters in the bottom of the tub. If they are clear, the chopper has most likely broken, that is, if your model has this type chopper. Since you didn't list a model number, I can only guess at the cause of the complaint. If you would like detailed instructions, please re-post with the model Number off of the I.D. tag of the unit. Read More...
Pat October 15, 2012 for Model Number KUDR24SE The water supply tube for our Kitchedaid dishwasher has frayed and started to leak. We've put tape around it but need a permanent solution. The old part # 75742 is no longer available. What do we need to fix it and how hard is the solution to install? Thanks
1 Answer Hi. Use the water supply line 3/8CX3/8MIPX72" Ss Dw TJ10SS72DW. Remove the lower kick panel and you will see it on the front lower left corner. Thank You. Read More...
Jb April 06, 2012 for Model Number Kenmore 665-15782300 I have a Kenmore 665-15782300 Dishwasher. This is not listed as a model this kit fits, but it looks similar. It seems that the upper mount broke, but really it would be good to replace the whole arm kit, like pictured. But does this one fit or is there a kit for this model without having to buy all the parts separately?
1 Answer JB, the manufacturer does not list the spray arm and tube kit 675808 for your Kenmore dishwasher model 665.15782300. Unfortunately, there is no kit available. You will need to purchase the spray arm WP8268840, bearing ring WP3376846, manifold WPW10258149, two screws WPW10349488, and the holder WP8268843. Thanks! Read More...
Anthony February 28, 2012 for Model Number kudm24sebl2 My top rack of my dishwasher is lower on one side than the other. I bought a upper arm kit and the new arm hits on the lower side of the top rack. They have changed the part and the new one will not work.
1 Answer Hello Anthony. 675808 is the correct kit for the model number you provided. You will need to check and make sure the hanger for the spray arm is installed correctly and the spray arm is tight and not flopping around. This should work with the dishwasher if installed properly according to the manufacture. Hope this helps. Read More...
Kb January 18, 2012 for Model Number Kenmore 66516812990 Upper spray tube broke at rack support. Is correct replacement of all necessary parts AP3115182 and AP3044177?
1 Answer Hello KB! You will need to check the upper spray arm mount WP8268812 and the mount assembly WP8539324 to verify which item has broken and replace. If needed the supply tube comes in kit 675808. Thanks! Read More...