Pat August 01, 2019 for Model Number MDG4000BWW Model MDG4000BWW Serial 31632076YU There appears to be multiple motors depending on series. How do I know which series I have?
2 Answers Hello Pat, Your model is series 31. This is determined by the first two digits of the serial number. As per the manufacturers' parts list set-up, you will need to order W10410997. Read More...
Pat August 01, 2019 for Model Number MDG4000BWW Model MDG4000BWW Serial 31632076YU There appears to be multiple motors depending on series. How do I know which series I have?
2 Answers The first two numbers in the serial number, in this case, the series is #31 Based on that information the motor part number should be W10410997 Read More...
Randy November 27, 2018 for Model Number CDE4205AYW i have a crosley dryer cde4205ayw. it takes motor wp33002795. my question is does the tumbler drive pulley on motor have a part number??? Mine broke. Thanks
1 Answer Randy, Unfortunately the motor pulley is not available separately and will have to get the complete motor. Read More...
Ken October 02, 2018 Dryer MDE5500ayq. Belt is shot. I have the unit taken apart prepared to order new belt, idler, rollers supports, felt. I tried to spin the blower, but it will not turn freely. Should the motor (blower) spin easily, in other words, should it keep spinning after I give it a push?
1 Answer Ken, Yes, th blower wheel/motor should continue to rotate after "I give it a push". There should be some "slight" resistance, but the "ramp down" revolutions will be determined by the amount of force applied at the start. Read More...
Alan E March 04, 2018 for Model Number MDE5500AYW Trying to determine drive motor RPM IN ORDER TO FIGURE TUMBLER DRUM RPM --- using a 30:1 ratio between motor Pully diameter and tumbler diameter--- Overloaded tumbler and drive belt broke --- working on finding New belt availability and source of same
1 Answer Alan, The part number for the belt on the unit will be WP33002535. Unfortunately we do not have the motor RPM as it is not supplied by the manufacturer. Read More...
Richard December 26, 2017 for Model Number MDG4000BWW I have this dryer. When you try to start it it buzzes and sets off the motors internal fuse. If I tape the door switch shut and start it empty it will start turning normally Or if I start the drum by hand with clothes in it by spinning the drum and holding the start button down it will run. I do not want to assume anything but think its the start windings in the motor going bad. If it is the motor the diagram shows two motors. Which one do I order? Serial number is 10789480WQ
1 Answer Richard, You are on target, based on your post information and description you most likely have a weak or failing start winding in the motor. The replacement motor assembly for the model and serial number you supplied is W10410997 / WPL W10410997 (33002237) . The manufacturer has replaced the original part with a "kit" with additional terminals and an instruction sheet to assist you in re wiring the new motor centrifugal switch. The part is in stock and available at this time. Read More...
Hugh September 15, 2017 for Model Number MDG2600BWW This is a Maytag 2006 gas dryer. Which motor do I need for a replacement and does it come with a pulley? Current motor is P/N 2201832 and has treaded end that the pulley - now stripped - screws on to accept belt. thanks
1 Answer Hello Hugh. Yes, You will need to order WP33002795 for the motor and pulley needed. Thanks. Read More...
Joe July 24, 2016 for Model Number MDE5500AYW Hello, I just ordered a replacement motor AP6007997 and was wounding if it came with the belt pulley? It shows it on the motor in the photo. I'm just confirming
1 Answer Hello Joe. Yes, according to the manufacturer it should have the pulley on the motor WP33002795. Read More...
Sid December 10, 2015 for Model Number MDG5500AWW How much shipping charges and if there is any sales tax. I am in Orange county, California can I pick up from local store? Sid
1 Answer Sid, We have sales tax in 3 states, TN, California and Pennsylvania. Here is our link to our shipping page for pricing http://www.appliancepartspros.com/customerservice/shipping.aspx Read More...
1 Answer Hello Frank. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. Here is a link to help you locate it. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...