Hubertaramirez June 18, 2011 for Model Number ATW4475VQ0 How can I install the AP290599 sound dampering ring?
1 Answer Hello Hubertaramirez. First, lift the lid,and remove the fabric softener cup. Then remove agitator hold down bolt and lift out agitator. Then set unit on its back. You need to unclip and set aside the water pump. Then unhook the motor electrical plug, remove screws holding down the motor and set the motor aside. Then unbolt the 3 bolts holding the transmission into the tub support assembly. Then pull complete transmission / agitator assembly out from the bottom. Then you will be able to slide the sound dampening ring onto the spin tube/brake assembly. Hope this helps. Thanks. Read More...
Kyrlette June 09, 2011 for Model Number wtw5530sq0 What is the purpose of the sound dampening ring? I noticed my dampeining ring is outside at the bottom of the gears housing.
1 Answer Hello Kyrlette! The sound dampening ring WP63134 is used to dampen the brake housing for sound purposes. Thanks. Read More...