Mary Faydash July 11, 2020 My kitchenmaid bottom freezer ice maker shutoff arm does not work. It doesn't stay up and continues to make ice. What part do I need?
1 Answer Mary, To properly assist we would need the model number of the refrigerator but based on this information sounds likely the icemaker is the issue. Read More...
Lou December 08, 2019 Frigidaire ice maker makes very loud noise . I have cleaned it out and even when I rotate shaft manually, it still makes grinding noise. Is there any lubricant I can try?
1 Answer Lou, If the ice maker is making that noise the only thing you can do is replace the ice maker. Read More...
Jo July 28, 2019 Whirlpool Rrig/Freezer plastic drawers not sliding....what do I use to make them slide ?
1 Answer Hello Jo, part WP99003172 is a food-grade silicone lubricant that can be lightly applied to the drawer's plastic sliding surfaces. Read More...
Matthew June 18, 2014 for Model Number GX2FHDXVB What grease is used to lubricate the freezer door slides?
Jean J. November 15, 2013 for Model Number lsr7233dz1 What type of grease is agitator cam grease? Silicone, white lithium, etc? I will only need a thimble full, why spend $25 if I already have some in my garage?
1 Answer Hello Jean, This is 3.5 ounces of poly-lube grease. It is way cheaper than 25 dollars. Read More...
James March 13, 2013 for Model Number Counter Top Ice Maker The plastic bowl that the water gathers in and then holds the water around the freezing rods rubs a small bit on the plastic inside the chamber. I put vegetable oil in this area now and it works for awhile. Do you have a lubricant that would last longer. When the bowl gets hung up the machine shuts off. If neede I can email you a picture if you give me your email address. Thanks for info.
1 Answer James, We would not have a sealant to be able to lubricate this part as it comes in contact with ice. Read More...
Lloyd A. May 09, 2012 for Model Number 10657071790 How to apply the Lubricant & Sealant to a new Mold-Ice Assembly and where ?
1 Answer Hi Loyd. There are 2- places on an ice mold assy. part # WPW10190929 that the lubricant will be used. It is on each pivoting round ends of the cube ejector arms where they meet the ice mold sides. Used lightly so they help the rotation under freezing temperatures. Then there is a Thermal Mastic compound that is part # 5303307896. It is placed on the face of the thermostat part # WP627985 or-#27- on the diagram to transfer the correct cube tray temperature to activate the mold heater and start motor /cube ejection revolution. Thank You. Read More...