Brad March 09, 2014 for Model Number GU2700XTSS The green "Clean" light continues to blink on my dishwasher. I can not get the dishwasher to run in any program. I have disconnected and reconnected power. It made no difference. I opened up the control panel and checked the thermal fuse (part #6) for continuity and found a closed curcuit. What should I look at next fix the problem??
1 Answer Brad, When the clean light is flashing 7 times then pauses and continues to flash in this sequence then the issue will be caused by a faulty heater circuit. You will want to check the heater, heater connections the thermostat, wiring from the heater to the control board. Also check to make sure that power is going from the control board to the heater. If any of the components have failed then replaced. If the clean light flashes with no pause then the keypad is stuck and would need to be replaced. Read More...
Randy February 26, 2014 for Model Number dishwasher MDBH979AWS3 Can I cross the contacts on the themal fuse to see if that's the problem. ( nothing turns on )
1 Answer Hello Randy. No, it is never recommended to bypass the part to see if it is bad. Read More...
Tony February 22, 2014 for Model Number mdb7609awb2 My maytag dishwasher just stopped running. Its like it has no power. I checked the breaker and that is fine.
1 Answer Hello Tony. If there is power to the fuse, but not out, you will need to replace the fuse. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Kevin February 17, 2014 for Model Number 66513859k Dishwasher runs thru all cycles but will not heat the water.I have continuity thru the heating element and thru the thermal switch(but when I remove the thermal swtch and shake it,it rattles,,,but still have continuity whatever position it's in) Is there another component that I'm missing besides the good ole control board?
1 Answer Hello Kevin. That would lead to the control board needing to be replaced in the unit. It sounds like the heater and the thermal cut out is good. Read More...
Oscar January 25, 2014 for Model Number MDB7749AWM2 I purchased the dishwasher 18 months ago and over night, it just died. Nothings lights up in the control panel. I checked the electrical outlet and power to it is ok.
1 Answer Hello Oscar. You need to check and see if the thermal fuse W10258275 is bad and needs to be replaced on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Greg January 09, 2014 for Model Number Maytag MDB7809AWB2 I have a Maytag MDB7809AWB2 dishwasher that will not start. Fuse has been tested, have power, every function button will light, but pressing the start button unit will not start. I ordered replacement control board, installed it and still have the same problem. What else could be wrong?
2 Answers Hello Greg. You will need to order and replace the control panel W10810424 on the unit. Read More...
Greg January 09, 2014 for Model Number Maytag MDB7809AWB2 I have a Maytag MDB7809AWB2 dishwasher that will not start. Fuse has been tested, have power, every function button will light, but pressing the start button unit will not start. I ordered replacement control board, installed it and still have the same problem. What else could be wrong?
2 Answers Hello Greg. You will need to order and replace the control panel W10810424 on the unit. Read More...
Jim P November 12, 2013 for Model Number DU1100xtps6 Dishwasher will not work nor are any of the lights on. Power to unit is OK. I has to replace the circuit board 95 days ago with a 90 warranty. Do I need to replace the curcuit board again??
1 Answer Hello Jim. If the fuse is good, you will need to replace the control board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Frank October 25, 2013 for Model Number du1345xtv84 Dishwasher will not start, no lights no nothing. There is power to the dishwasher, is there a reset button? rca whirlpool model du1345xtv84
1 Answer Hello Frank. It sounds like the fuse W10258275 is bad and will need to be replaced in the unit. Read More...
Richard October 14, 2013 for Model Number KEBS278DBS8 When I moved in to our home the lower oven on the KitchenAid Superba doesn't work, is this most likely a fuse or heating eliment or ??? Thanks for your time!
1 Answer Hello Richard. You will need to test the element and fuse. Both should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...