Jan July 07, 2020 for Model Number KERC500HWH1 I need the wire schematic orientation for wiring the new dual switch Part number 8203538
1 Answer Jan, The black wire from the number 2 terminal will go to P1, The red wire on N will go to the P2 terminal, the Black jumper wire will go from P1 to S1, The wire from terminal 5 will go to S2, terminal number 3 will go to terminal 4 and the terminal 4 will go to terminal 4a. Read More...
Claude January 16, 2016 for Model Number 8203538 Infinite Switch I just bought a replacement infinite switch for my KitchenAid Superba stove and the replacement part was a 8203538 infinite switch. The installation instructions say that I'm supposed to attach the provided jumper between terminals P1 and S1, however my switch came without this jumper cable. What does this jumper cable do and would it be safe to operate the stove without this jumper in place? Should I return the part and get them to replace it with one that comes with the jumper?
1 Answer Hello Claude, you can return the part for another to see if it is in the package as it should be or you can make a jumper from a short piece of wire and two spade connectors, one a piggyback connector TJMA02896-1 and one standard TJMA02875-1. Read More...
J October 01, 2014 for Model Number KERC507HBT2 Can you tell me if this is for controlling the front-left double burner of my kitchenaid range? On this link it appears to be correct however the description is not very helpful in attempting to confirm. thanks http://www.kitchenaidpartsonline.com/modellookup/index/thirdstep/keyword/KERC507HBT2/model_no/KERC507HBT2/model_id/370617/diagram_id/10189167
1 Answer J, The infinite switch part number 8203538 is the correct switch to control the left front burner. Read More...
Lee November 14, 2011 for Model Number Kerc507hbL2 I purchased a new infinite switch that is the only one offered.It is supposed to be a direct replacement but the wire diagram leaves out an orange wire that I'm guessing is for a red connection and no where to plug in the blue wire for the red indicator light on the face.The instructions leave out #'s from the original part.I really don't want burn up a new switch.Any ideas?
1 Answer Lee, I take for granted, the new infinite switch is for the Left Front Dual element burner ? This is what I have, and should be the way to wire your replacement switch. First, install the added jumper wire to the P1 and S1 terminals of the new switch. The Black L1 wire was on the #2 terminal of the old switch, is now attached to the other P1 terminal of the new switch. The red wire on terminal #3, will now be attached to terminal #4 of the new switch. The blue wire #4 will now attach to terminal #4a on the new switch. The wire for the pilot light/indicator light (blue) #5 will attach to terminal # S2 on the new switch. The brown wire #N should now attach to terminal # 2 on the new switch. And the red/orange wire, should connect to terminal # P2 on the new switch. I'm pretty sure you'll be fine after this. Good Luck and Thanks Read More...
Charlie T. October 15, 2011 for Model Number ykerc507hs2 Hi there. Will this switch fit on the above entered model because I can't find this model. Thanking you in advance. Charles
1 Answer Hello Charles! Unfortunately, we do not have any information regarding model ykerc507hs2. This is showing to be an international model. I would suggest contacting the manufacture for further parts assistance. Thanks. Read More...