Parts for Frigidaire CRA226ST210: 03 - Recommended Spare Parts

This refrigerator water filter removes common impurities from the ice and water supply so you get cleaner-tasting water and clearer ice. Designed to fit inline/replaceable filter housings used in many Frigidaire refrigerators. What it does:

• Reduces chlorine taste and odor for improved drinking water flavor
• Helps reduce sediment and particulates that can affect ice clarity
• Keeps water flowing properly when replaced as part of routine maintenance
• Addresses symptoms like cloudy ice, bad-tasting water, or reduced water quality

• One replacement refrigerator water filter cartridge

• Replace filter according to your refrigerator manufacturer's instructions; typically twist or push in to seat and lock
• Run several gallons of water through the dispenser after installation to flush the system and remove loose carbon fines
• If water flow is restricted after installation, check filter orientation and seating; do not force
• For safety, disconnect power to the appliance before accessing internal filter housings

This louver is the molded vent trim that directs airflow and covers an appliance air opening, keeping the interior airflow organized and the opening finished. It restores proper venting and the appliance's exterior appearance. What it does:

• Directs airflow from the appliance's fan or vent to help consistent cooling or ventilation
• Covers and finishes an exterior or interior vent opening for a clean look
• Helps keep large debris or objects from entering the vent opening
• Cracked, broken, or missing louvers can cause rattling noises or disrupted airflow

• One louver piece

• Disconnect power to the appliance before starting any work
• Access may require removing trim or a cover panel; keep fasteners for reassembly
• Handle plastic trim gently to avoid cracking; use proper trim tools or a flat tool to pry if needed
• Verify orientation and fit before securing; do not force part into place

This handheld remote control lets you operate compatible Frigidaire appliances from a distance, restoring convenient control of modes, temperatures, and timers without touching the main unit. What it does:

• Sends remote commands to the appliance so you can change modes, fan speed, temperature, or timers from across the room
• Replaces a lost, cracked, or unresponsive remote to regain full remote functionality
• Helps when the appliance doesn't respond to the existing remote or when buttons stick or fail
• Uses standard battery power

• One handheld remote control

• Insert fresh batteries and aim the remote at the appliance's IR receiver; check batteries first when troubleshooting
• Re-pairing or simple setup may be required per the appliance owner's manual—follow OEM instructions if prompted
• Keep remote dry and avoid dropping; remove batteries if storing long-term
• Recycle or dispose of old batteries and electronics according to local regulations

This oven temperature sensor detects the internal temperature and sends readings to the range control so the oven can maintain accurate cooking temperatures. Replaces a failed or intermittent sensor to restore reliable temperature control. What it does:

• Senses oven cavity temperature and provides temperature data to the control board
• Helps the control maintain set bake/roast temperatures
• Common symptom: oven temperature is incorrect or fluctuates during cooking
• Common symptom: cook cycles take too long or oven does not reach set temperature
• Common symptom: oven displays a temperature sensor or sensor fault code

• One oven temperature sensor (1 each)

• Disconnect electrical power to the appliance before removing or installing the sensor
• Handle the sensor carefully to avoid damaging the probe or wiring and ensure proper connector seating
• Inspect wiring and connector for damage; replace if frayed or corroded

This electronic control board regulates oven and range functions, interpreting user inputs and controlling displays, timers, heating elements and relays for reliable cooking cycles. Replaces a failed or unresponsive console control to restore normal operation. What it does:

• Receives button/knob signals and sends commands to heating elements, broil/convect systems, timers and indicators
• Drives the display and status indicators so controls and temperature readouts appear correctly
• Controls cycle timing and safety interlocks to enable proper oven operation
• Common signs of failure: blank or erratic display, unresponsive buttons, error codes, or heating elements that won't turn on

• One electronic control board

• Disconnect power at the fuse/circuit breaker before beginning work
• Handle the board carefully to avoid static discharge and physical damage
• Installation typically requires removing the console or control panel; keep fasteners and wiring organized

This evaporator coil circulates refrigerant inside the freezer compartment to absorb heat and support proper cooling. Replacing a damaged coil restores efficient cold production and helps prevent ice buildup or inconsistent temperatures. What it does:

• Absorbs heat from the freezer compartment so refrigerant can carry it away
• Works with the compressor and condenser to maintain proper freezing temperatures
• If faulty, may cause symptoms like warm freezer, excessive frost/ice buildup, or long run cycles
• Necessary for proper defrost system performance when paired with a functioning heater and thermostat

• One evaporator coil

• Disconnect power before servicing; follow all safety precautions for appliances
• Inspect and test the defrost heater, thermostat, and related components when replacing the coil
• Handle the coil carefully to avoid bending fins or damaging connections

This replacement tube routes water or drainage inside the refrigerator to support the ice maker, dispenser or defrost drain path. It restores proper water flow and helps prevent pooling or leaks when original tubing is cracked or blocked. What it does

• Channels water between internal components so the ice maker and dispenser receive water or to carry defrost drain to the pan
• Helps prevent leaks from cracked, brittle, or pinched tubing
• Restores normal water flow when the original line is obstructed or damaged
• Works as a direct-fit replacement when the original tubing has failed

• One replacement tube as shown

• Recommended for those comfortable with basic refrigerator disassembly; unplug the appliance first
• Turn off the water supply and drain lines before removing or replacing the tube
• Inspect adjoining fittings and clamps; replace any damaged fasteners to ensure a watertight seal

This condenser coil assembly removes heat from the refrigeration system so your fridge can cool efficiently. Replaces a worn or damaged condenser to help restore normal compressor cycling and reduce high operating temperatures. What it does:

• Dissipates heat from refrigerant so it can condense back to liquid form
• Helps maintain proper compressor load and efficient cooling
• Commonly replaced when coils are bent, corroded, or blocked and cause poor cooling or an overheating compressor
• Works as part of the sealed refrigerant circuit; does not include refrigerant handling or charging

• Disconnect power to the appliance before starting any repair
• Handle coil fins carefully to avoid damage; use gloves and eye protection
• May require removing the rear access panel and unplugging electrical connectors near the compressor

This blower wheel moves air through the dryer cabinet so clothes dry efficiently and the appliance vents properly. Replacing a worn or damaged wheel restores airflow and helps prevent overheating and long dry times. What it does:

• Spins on the blower motor shaft to draw air across the heating element and through the drum
• Restores proper airflow when a chipped or bent wheel causes reduced drying performance
• Reduces rattling or vibration caused by imbalanced or cracked fins
• Helps prevent overheating and extended cycle times due to restricted airflow

• One blower wheel

• Disconnect power (and gas if applicable) before servicing to avoid electric shock or injury
• May require removal of the dryer front or blower housing and loosening the motor to slide the wheel onto the shaft
• Ensure the wheel is oriented and seated correctly on the motor shaft and that set screws or clips are tightened as required
• Inspect motor shaft and housing for debris; spin the new wheel by hand to ensure free rotation before reassembly

This replacement blade fan moves cold air across the evaporator to help maintain even temperatures inside the compartment. It restores proper airflow for more consistent cooling and helps reduce frost buildup when working with a good motor. What it does:

• Circulates air across the evaporator to distribute cold air through the compartment
• Restores airflow when a cracked, warped, or missing blade reduces cooling efficiency
• Helps reduce uneven temperatures and localized warm spots caused by poor airflow
• Can reduce abnormal noises caused by damaged or unbalanced blades

• One replacement blade fan

• Disconnect power to the appliance before starting any repair
• Remove the evaporator cover/panel to access the fan assembly per your model's service instructions
• Handle the replacement blade carefully to avoid bending the blades or contaminating the evaporator
• If the fan motor or mounting hardware is damaged, replace those parts as well for reliable operation

This replacement cover is an access panel that protects internal components and keeps the appliance exterior finished. It restores a clean appearance and helps prevent dust, debris, and accidental contact with internal parts. What it does:

• Covers and protects internal appliance components behind the cabinet or control area
• Maintains a finished exterior and prevents small objects from entering service areas
• Helps reduce dust buildup on internal parts that can affect performance over time
• Commonly replaced when scratched, cracked, or damaged during service or impact

• One cover

• Disconnect power (and water/gas if applicable) before starting any repair
• Handle edges carefully; use appropriate fasteners and follow OEM placement for a flush fit
• If mounting hardware is damaged or missing, replace with OEM-specified screws for secure installation

This cabinet is the refrigerator's main outer housing that provides the finished exterior and structural support for internal components. Replacing a damaged cabinet restores the appliance's appearance and helps protect internal parts from damage. What it does:

• Forms the appliance's exterior shell and supports internal assemblies
• Protects internal components from dust, moisture and accidental impact
• Restores a dented, cracked or cosmetically damaged exterior
• Helps reduce rattling by providing a secure mounting surface

• Disconnect power and empty the appliance before starting
• Cabinet is large and may be heavy—use a helper to avoid injury or damage
• Expect to remove trim, doors and mounting hardware to access cabinet fasteners
• Keep screws, clips and seals organized for reassembly; replace damaged fasteners or seals as needed