Parts for Kenmore Elite 79578042312: Refrigerator Parts

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Leveling leg assembly stabilizes and levels your refrigerator cabinet. Replace worn, stripped, cracked, or broken legs to eliminate rocking and vibration.

Plastic rail holder that secures drawer glide rails inside your refrigerator. Replaces broken, cracked, or missing holders causing drawer misalignment.

Right-hand rail guide assembly for refrigerator drawers and shelves. Ensures smooth sliding and proper alignment. Replace if cracked, broken, or worn.

Left-hand drawer rail guide assembly for refrigerator bottom compartment. Replace when cracked, broken, or causing drawer misalignment or rough sliding.

Stores ice from your refrigerator's ice maker. Replace if cracked, warped, or damaged, causing ice jams, poor dispensing, or freezer mess.

Shelf support holder for bottom-mount refrigerators. Secures shelving in place inside the fresh food compartment. Replace if cracked, broken, or missing.

Replace worn drawer rollers to restore smooth, quiet sliding in your refrigerator. Fixes binding, noise, and uneven travel. Confirm fit with your model.

Freezer drawer roller assembly for refrigerators. Installs on bottom drawer to enable smooth gliding. Replace if roller is cracked, broken, or worn.

Replacement drawer tray for refrigerator storage compartments. Restores a clean, sturdy base when original is cracked, broken, or missing. Keeps food organized.

Replace a cracked, chipped, or missing glass shelf in your bottom-mount refrigerator. Restores a sturdy storage surface for food and containers.

Rail guide assembly for refrigerator drawers. Mounts inside the cabinet to support smooth drawer gliding. Replace if cracked, broken, or missing.

Drawer glide rail assembly supports and guides refrigerator drawers for smooth opening and closing. Replace if drawer sticks or misaligns. Confirm fit.

Drawer slide rail guide assembly for refrigerators. Installs to support and align drawers. Replace if cracked, bent, broken, or causing misalignment.

Replaces worn or damaged refrigerator drawer rail guide assembly. Restores smooth sliding when original guide is cracked, broken, or causing binding.

Replacement vegetable drawer pan for your refrigerator. Installs in the crisper compartment to hold produce and contain spills. Replace if cracked or broken.

Fix loose or stuck control knobs with this control panel shutter. Restores proper knob engagement and prevents debris buildup. Simple snap-in repair.

Clear plastic crisper drawer that holds and organizes produce in your refrigerator. Replace if cracked, chipped, broken, or missing to restore storage.

Molded cover panel that shields and finishes designated refrigerator sections. Replace when original is cracked, warped, or missing for secure fit.

Protective cover that installs over storage tray or bin in your refrigerator. Replace if cracked, broken, or missing to restore support and containment.

Replacement rear support cover that secures and protects the back panel of your refrigerator. Needed when original is cracked, broken, or missing.

Replacement cover for your refrigerator's glide and serve drawer. Snaps into place over the meat/deli compartment. Order if your cover is cracked or broken.

Replace a cracked, broken, or missing refrigerator glass shelf to restore safe storage space. Installs above crisper drawers for organized food storage.

Refrigerator tray assembly installs inside the fresh food or freezer compartment. Replace if tray is cracked, broken, or missing to restore storage space.

Replaces worn refrigerator door seals to restore tight closure and prevent air leaks. Install when you notice frost buildup or warm temps. Verify fit.

Name plate for refrigerator exterior identification. Replace this cosmetic label if faded, peeling, scratched, or missing to restore appliance appearance.

Small stopper that fits inside the handle assembly to limit travel and keep the handle properly seated. Replace if worn, missing, or broken to restore secure feel.

The Refrigerator Set Screw is an OEM part for LG refrigerators. This small but crucial component is used to secure various parts of the refrigerator, ensuring stability and proper alignment of the internal components. This set screw is sold individually.

Causes of a bad set screw can include stripping due to over-tightening, corrosion from moisture exposure, or wear and tear over time. A loose or missing set screw can lead to instability and misalignment of the refrigerator parts, potentially causing operational issues.

Symptoms of a bad refrigerator set screw include:

• Loose or wobbly internal components
• Doors not closing properly or misaligned
• Unusual noises from inside the refrigerator
• Parts becoming detached or misaligned

This OEM LG part is also compatible with Sears/Kenmore models.

Seals refrigerator door to maintain airtight closure, keeping cold in and moisture out. Replace when worn to restore efficiency. Verify fit with model.

Plastic guide rail that supports and aligns freezer drawer for smooth operation. Replace if cracked, broken, or drawer won't slide properly.

Secures and aligns the water pitcher in your refrigerator door. Replace if cracked, broken, or missing to keep your pitcher stable and organized.

Replaces a cracked, broken, or missing door bin on your refrigerator. Mounts to the inner door liner to organize condiments, jars, and bottles securely.

Refrigerator door basket mounts inside the door to hold bottles, condiments, and small items. Replace if cracked, broken, or loose to restore secure storage.

Replacement door basket for refrigerator doors. Stores bottles, jars, and condiments. Replace when cracked, broken, or missing. Snaps securely into door.

Replacement door closing cam for refrigerator doors. Guides the door into correct position for smooth closing and tight seal. Order if cam is cracked or worn.

Snap-in hole plug button covers unused panel openings on refrigerator doors and control panels. Replaces broken, missing, or cracked plugs.

This display case assembly replaces the exterior control panel bezel and housing to restore a clean, readable control area and protect the display and buttons from damage. It improves appearance and helps keep electronics sealed from spills and debris. What it does:

• Re-houses the refrigerator's display and button area so controls are visible and accessible
• Protects internal display circuitry from spills, splashes, and everyday wear
• Restores proper fit and finish when the original bezel is cracked, warped, or cosmetically damaged
• Can resolve symptoms such as a loose or rattling control area, visible damage to the panel, or exposed wiring

• One display case assembly

• Disconnect power before servicing to avoid shock or damage
• Removal typically requires removing the upper trim or control housing fasteners; keep screws and clips for reassembly
• Handle gently to avoid scratching the finished surface or damaging the display window
• If the display electronics are attached, take care with wiring and connectors; for connector locations and disassembly steps

Door hinge conversion kit for bottom-mount refrigerators. Allows reversing door swing from right to left or left to right. Replace if missing pieces.

Cosmetic trim piece that snaps over the door hinge to conceal hardware and protect from dust. Replaces cracked, broken, or missing hinge covers.

Covers and protects the refrigerator hinge assembly. Replace this plastic cover if cracked, broken, or missing to restore a clean appearance.

Upper left door hinge for refrigerators. Secures and aligns the top of the door to the cabinet. Replace if hinge is bent, cracked, or damaged.

Upper right door hinge for bottom-mount refrigerators. Mounts at the top of the door. Replace if cracked, broken, or when reversing door swing.

Plastic cap that covers the door hinge assembly on your refrigerator. Replace if cracked, broken, discolored, or missing to restore a clean appearance.

Covers and protects the hinge pivot on your refrigerator door. Replace if cracked, broken, or missing to restore a finished look and keep debris out.

Hinge cap for bottom-mount refrigerators. Covers and protects the door hinge mechanism. Replace if cracked, broken, or missing for a clean finish.

Replacement door hinge bushing for refrigerators. Installs in door hinge mechanism. Replace when worn, cracked, or causing door grinding or misalignment.

Refrigerator not cooling properly? The evaporator coil assembly absorbs heat to cool your fridge. Moderate DIY repair with basic tools required.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Refrigerator not cooling? This compressor overload protector prevents motor overheating by cutting power when current spikes. DIY-friendly repair.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Fix erratic temperature readings or sensor errors with this PTC sensor cover. Shields the sensor from debris and damage. Simple 5-minute snap-on repair.

Fix refrigerator vibration and rattling noise with this compressor damper. Cushions the compressor to reduce metal-on-metal contact and wear.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Motor running loud or vibrating excessively? This motor mounting bracket secures the motor to the cabinet, reducing vibration and noise for stable operation.

This replacement condenser assembly includes the attached wiring harness that secures and connects condenser-area components. It restores the factory wiring path for the condenser and associated electrical connections to help re-establish proper operation. What it does:

• Provides the condenser mounting/connection assembly and pre-attached wire harness for condenser-area components
• Restores factory routing and connector locations for reliable electrical connections
• Commonly replaced when condenser-area wiring is damaged, frayed, or disconnected
• Can resolve symptoms such as cooling loss, intermittent condenser fan operation, or electrical faults localized to the condenser area

• One condenser assembly with attached wire harness

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing the rear service panel; keep fasteners and grounding in mind
• Match connectors and wire routing to the original layout; avoid pinching or sharp bends

Fix a noisy or non-working refrigerator fan that's causing ice buildup or warm temperatures. This motor replacement restores proper airflow in 30-60 minutes.

Fix loud grinding noise or warm freezer with this evaporator fan assembly. Circulates cold air between compartments. 15-minute repair for most DIYers.

Protective fan grill assembly for refrigerators. Mounts over the condenser or evaporator fan to prevent debris contact. Replace if cracked or broken.

Fix error code ER DH or ice buildup in your freezer with a new defrost control assembly. Regulates defrost cycles to prevent frost. Moderate DIY repair.

Fix a refrigerator that won't turn off the light when the door closes with this magnetic door switch. Simple DIY repair for most home refrigerators.

Fixes refrigerator lights that won't turn on, stay on, or flicker when door opens. This door switch activates interior lighting. DIY install in 20 minutes.

If your refrigerator is noisy or not cooling evenly, the evaporator fan motor may need replacement. 15-30 minute repair requires freezer panel removal.

Reduce refrigerator rattling and humming from the compressor area. This damper absorbs vibration between the compressor and base for quieter operation.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Replace your refrigerator's LED light assembly when interior lighting dims or fails. Restores bright, energy-efficient illumination. Verify fit with model number.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

Refrigerator won't power on or loses power intermittently? This power cord assembly replaces frayed or damaged cords to restore safe, reliable operation.

Refrigerator not cooling? This compressor overload protector prevents motor overheating by cutting power when current spikes. DIY-friendly repair.

Dryer not heating or taking too long to dry? This heating element generates hot air to dry clothes. Common fix for poor heating performance.

Refrigerator not cooling properly or freezer icing up? This evaporator fan motor circulates cold air throughout your unit. Moderate DIY repair.

Control panel unresponsive or erratic? This protective cover shields your refrigerator's circuit board from moisture and debris. Straightforward install.

Refrigerator won't start or respond to controls? This power control board regulates power distribution and restores reliable operation to your appliance.

Replace your refrigerator's light cover assembly when cracked, yellowed, or broken. Protects the interior bulb and ensures proper lighting. Verify fit with your model number before ordering.

Ice maker stopped producing ice or cycles too slowly? This complete ice maker assembly replaces a faulty unit. DIY-friendly installation in 10-15 minutes.

Fix exposed or damaged sensor areas with this refrigerator sensor cover assembly. Clips into place with a simple screwdriver removal. Quick 5-minute fix.

Compressible foam gasket that seals refrigerator panels to prevent air and water leaks while reducing noise. Replace when worn to restore efficiency.

Ice maker not working or leaking water? This inlet valve assembly controls water flow to your ice maker and dispenser. DIY install in 30 minutes or less.

Secures internal components in place to prevent rattling and misalignment. Replace if cracked, broken, or missing. Confirm fit with your model number.

Fix a refrigerator not cooling properly or running too warm with this temperature sensor. Monitors internal temps to maintain proper cooling.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.