Parts for Maytag MSS25C4MGB00: Refrigerator Shelf Parts

The Whirlpool EveryDrop Ice and Refrigerator Water Filter 1 is an OEM replacement part for Whirlpool refrigerators. This filter works to remove small particles from water to ensure clean, great-tasting ice and drinking water directly from the refrigerator door.  Measuring approximately 2.50 x 2.50 x 8.69 inches, this filter is easy to install. 

For optimal performance, we recommend replacing the filter every six months. The filter material is made from coconut carbon block, which has a micron rating of 0.5 and a flow rate of 0.5 gpm. The filter is designed to operate at a maximum pressure of 125 psi and an operating temperature of 38-100°.

Symptoms of a filter needing replacement include:

• Gradual decline in water/ice quality over time exhibiting muddy appearance or odd tastes
• Filter life indicator appears showing it is time for a new one 

Causes stem from normal usage over the stated capacity of the original filter. Allowing one to expire could produce unhealthy water.

This OEM replacement part is compatible with select Maytag, Jenn-Air, and Amana models as well.

This replacement cover protects internal components and completes the assembly's enclosure. Replace a cracked, loose, or missing cover to restore proper protection and fit, helping the appliance operate safely and as designed.

• Shields internal parts from dust, spills, and accidental contact
• Helps maintain intended airflow or enclosure integrity
• Restores secure mounting; reduces rattles and vibration
• Replace if the cover is cracked, warped, missing, or won't stay secured
• Common signs: broken/stripped tabs, visible damage, or persistent rattling

• Disconnect power before service; shut off water or gas if applicable
• Wear cut-resistant gloves—edges can be sharp
• Retain and reuse original screws/clips; transfer any reusable seals or labels from the old cover
• Align tabs/fasteners and tighten evenly without overtightening; verify no interference before restoring power

This replacement cover is a factory-designed protective piece used on select Whirlpool-built appliances. It shields the mounting area and internal components, restoring a secure fit and clean finish when the original cover is damaged or missing. What it does:

• Protects internal parts and wiring from debris and accidental contact
• Closes and finishes an opening to maintain proper operation and appearance
• Helps keep adjoining parts aligned and retained as designed
• Replace if the cover is cracked, warped, loose, or missing

• 1 cover

• Disconnect power; for water-using appliances, also shut off the water supply
• Use the correct screwdriver or nut driver; retain and reuse original fasteners
• Note the orientation and tab/slot locations before removal for proper reinstallation
• Do not overtighten; snug fasteners just enough to secure without cracking plastic

The Meat Pan is an OEM replacement part for Whirlpool refrigerators. It is designed to provide a dedicated space for storing and organizing your meats, keeping them fresh and easily accessible. It helps maintain humidity levels and prevents cross-contamination with other food items in the refrigerator.

A bad meat drawer pan can occur due to wear and tear, damage, or improper cleaning. If you notice symptoms such as cracks, discoloration, or difficulty in sliding the drawer in and out, it may be time to replace the meat drawer pan.

Symptoms of a bad meat pan include:

• Cracks or damage on the pan
• Discoloration or stains that are difficult to remove
• Difficulty in sliding the drawer in and out

Repair of your refrigerator by replacing the faulty or damaged meat drawer pan with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This shelf support stud anchors a refrigerator shelf to the cabinet liner so it stays level and secure. Replace a cracked or missing stud to restore proper support and prevent shelves from tilting, slipping, or dropping.

• Locks into the liner wall to provide a mounting point for the shelf frame or bracket
• Keeps the shelf aligned and at the correct height
• Common symptoms: broken/missing stud, shelf won't sit flat, shelf sags or falls on one side
• Helps prevent items from sliding due to an unstable shelf

• Disconnect power; remove the shelf and any items resting on it. Handle glass shelves carefully and consider wearing cut-resistant gloves.
• Remove the damaged stud (release the locking tab or twist out, depending on design).
• Insert the new stud into the existing hole until fully seated and locked.
• Reinstall the shelf and verify it sits level before reloading.

This factory fastener secures panels, brackets, or internal components in your appliance. Replacing a missing or damaged screw restores a tight fit, reduces rattles, and keeps assemblies properly aligned for dependable operation.

• Fastens sheet-metal panels, braces, and trim to the cabinet/frame
• Helps maintain alignment and structural integrity of assemblies
• Can reduce vibration noises and looseness caused by missing/stripped hardware
• Replace if the head is rounded, threads are worn, or the screw is corroded

• Disconnect power; for gas or water appliances, also shut off the supply
• Match location and start threads by hand to avoid cross-threading
• Use the correct driver size; tighten snugly without overtightening

The Snack Pan is an OEM part for Whirlpool refrigerators. It is designed to neatly store snacks, beverages, and other items on a shelf in the refrigerator or freezer compartment. 

The snack pan plays an important role in organizing smaller items and contains any spills or leaks. Its removable design also allows for easy cleaning of the shelf surface below.

Causes of a bad snack pan can include cracks or breaks from accidental drops or impact. The edges may become worn, bent, or misshapen from regular use over time. 

Symptoms of a bad snack pan include:

• Cracks or structural integrity compromised 
• Difficulty removing from the shelf or poor fit
• Leaks or spills onto the shelf below
• Detached or missing handles or edges

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Snack Pan Holder is an OEM part for Whirlpool refrigerators. It is designed to provide storage and easy access for snack pans, dips, and spreads within the fresh food or freezer compartments. The snack pan holder fits seamlessly onto shelves, preventing spills and keeping items organized. Please not this holder does not include the glass.

Causes of a bad snack pan holder include cracks or breaks from excessive bending or impact, discoloration or deterioration from long-term exposure to temperature extremes, or loose or missing mounting hardware that causes the holder to become unsecured.

Symptoms of a bad snack pan holder:

• Items stored on or in the holder fall over or spill easily  
• The holder itself has become loose, wobbly, or fallen off the shelf
• Small pieces of the holder are found inside the refrigerator

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This Whirlpool Glass Shelf is an OEM part for selected Whirlpool refrigerator models. Designed to offer a stable and aesthetically pleasing storage solution within your fridge, this glass shelf is crafted for durability and ease of cleaning.

Common issues include cracking, chipping, or shattering, which can compromise the safe storage of food items and affect the overall usability of the fridge.

Symptoms of a damaged fridge glass shelf include:

• Visible cracks or chips in the glass.
• The shelf sits unevenly or wobbles when items are placed on it.
• Difficulty in sliding the shelf in and out of its designated slots.
• The glass appears foggy, discolored, or has surface scratches.
• The shelf fails to support the weight of regular food items without bending.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

The Holder Crisper Meat Pan is an OEM part for Whirlpool refrigerators. This holder provides support and stability for the crisper or meat pan, ensuring it slides in and out smoothly while securely holding the contents. Its dimensions are roughly 12 inches by 16 inches.

Causes of a bad holder crisper meat pan can include regular wear and tear, damage from overloading, or cracks and breaks due to mishandling. A damaged holder can lead to misalignment of the crisper or meat pan, making it difficult to use effectively.

Symptoms of a bad Holder Crisper Meat Pan include:

• The crisper or meat pan not sliding in and out smoothly
• The pan not staying in place or feeling loose
• Visible cracks or breaks in the holder
• Difficulty in accessing or organizing items within the pan

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

NOTE: PER FACTORY DOES NOT COME WITH GLASS FOR FRAME

• WITH GLASS ORDER PART # W11263198 

The Glass Shelf is an OEM part for Whirlpool refrigerators. It provides an organized storage surface for items in the refrigerator and freezer. The tempered glass shelf is designed to be durable and able to withstand regular use and handling of stored items. 

Causes of a bad glass shelf include impact or accidental mishandling that leads to glass damage over time, excessive weight loads that cause sagging, and normal wear and tear of the mounting hardware.

Symptoms of a bad glass shelf include:

• Cracked, chipped, or damaged glass that presents a safety hazard 
• A shelf that bows or sags under load instead of remaining flat and level
• A shelf that no longer mounts or slides securely in the refrigerator rails

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.