Parts for Ge AEE08ATL1: Room Air Conditioner Parts

Front panel assembly replaces a damaged or worn control panel to restore the appliance's appearance and provide a secure mounting surface for control buttons and displays. What it does:

• Provides the finished exterior for the control area and protects internal components from everyday wear and impact.
• Supports and secures control knobs, buttons and display components so controls operate correctly.
• Restores cosmetic appearance when the original panel is cracked, dented or heavily scratched.
• Helps prevent loose or misaligned controls caused by a damaged front panel.

• Disconnect power to the appliance before beginning any work to avoid risk of electrical shock.
• Access typically requires removing the control console or surrounding trim; keep track of screws and clips during disassembly.
• Handle edges and painted surfaces carefully to avoid scratching; some parts may need to be transferred from the old panel.

This electric heating element replaces a failed oven/range heating component to restore bake and broil heat. It installs in the oven cavity and provides the radiant heat needed for cooking. What it does

• Heats the oven cavity so the appliance can reach and maintain cooking temperatures
• Commonly replaces elements that glow but fail to produce enough heat
• Resolves symptoms like no heat, uneven baking, or oven not reaching set temperature
• Connects to existing terminal screws/wire harness for direct replacement

• Disconnect power at the breaker before starting any repair
• Allow the oven to cool completely and wear gloves to avoid sharp edges
• Remove the oven racks and access panels for clear access to the element mounting screws and terminals
• Tighten terminal screws securely and test operation after reassembly

This shield is a protective metal/plastic cover used to protect internal components and direct airflow inside the appliance. It helps prevent debris contact and reduces wear on nearby parts for more reliable operation. What it does

• Covers and protects wiring, connectors, or other internal components from debris and accidental contact
• Helps channel airflow or isolate heat-sensitive areas to support normal component function
• Prevents rubbing or chafing that can cause noise or premature wear
• A damaged or missing shield can lead to visible damage, rattling, unusual noises, or exposed parts

• One protective shield

• Disconnect power to the appliance before starting any repair
• Follow the appliance's service manual or OEM instructions for removal and installation
• Handle edges carefully — shields may have sharp metal edges
• Basic hand tools are typically required

A hardware assembly used to secure and align internal components during appliance installation. Restores proper mounting and reduces movement for a safer, more stable fit. What it does:

• Provides the mounting hardware needed to fasten appliance panels or components
• Helps stop rattling, sagging or misalignment caused by loose or missing fasteners
• Restores structural support for doors, trim, or internal brackets
• Replaces worn or damaged installation hardware to improve fit and function

• One hardware assembly for installation

• Follow the OEM diagram when installing
• Disconnect power and any fuel supply before starting work
• Use appropriate tools and torque; replace any damaged fasteners

This nut with attached washer is a small securing fastener used to clamp appliance parts and prevent loosening. It provides a low-profile, integrated washer bearing surface for a reliable hold. What it does:

• Secures panels, brackets, or components to prevent movement and rattling
• Maintains clamping force where an integrated washer is needed
• Helps keep electrical and mechanical connections stable
• Common symptom: loose or vibrating parts, squeaks, or components that shift during use

• One nut with attached washer

• Disconnect power and water before servicing
• Use the correct socket or wrench to avoid rounding the nut
• Tighten to snug fit — avoid overtightening which can strip threads or damage parts
• If replacing a rusted or damaged fastener, inspect mating threads and replace as needed

This flat washer provides a secure, even load distribution for a fastener on the appliance, helping maintain proper assembly and reduce loosening or wear. Use it to replace a damaged or missing washer during repairs. What it does:

• Sits under a nut or bolt to spread load and protect the appliance surface
• Helps prevent fasteners from loosening due to vibration
• Restores proper spacing and alignment for connected parts
• Commonly replaced when you see corrosion, cracking, or a loose connection

• One flat washer

• Disconnect power and turn off water supply before starting any repair
• Tighten fasteners to a snug fit—avoid over-tightening which can crush the washer
• If adjacent parts show damage or corrosion, inspect and replace as needed

This axial flow fan circulates air inside the appliance to help cool components and maintain proper ventilation. It replaces a worn or damaged blower wheel to restore airflow and reduce overheating risk. What it does:

• Moves air across coils or internal components to support cooling and ventilation.
• Helps prevent overheating and supports consistent appliance performance.
• Can reduce unusual temperature-related symptoms or poor cooling/airflow.
• Fits into the appliance's blower/motor assembly to restore proper airflow.

• Disconnect power to the appliance before starting any repair.
• Handle the fan blades carefully to avoid bending or damage.
• Verify proper seating on the motor shaft and secure fasteners per the appliance's service instructions.

This room temperature sensor measures interior air temperature so the refrigerator can regulate cooling cycles and keep food fresh. Replaces a failed thermistor to restore accurate temperature readings and stable cooling. What it does:

• Senses refrigerator cabinet air temperature and sends a signal to the control board
• Helps the control board cycle the compressor and fans correctly for consistent cooling
• Commonly fails when you see warm or inconsistent temperatures inside the fridge
• Can cause the unit to run too long or not cool if the sensor reads incorrectly

• One room temperature sensor (thermistor) as shown

• Disconnect power to the appliance before replacing the sensor to avoid shock
• Handle the sensor and connector carefully; do not tug on wiring
• Mount and route the sensor per the manufacturer's location—replace in same position for accurate readings

This main control board powers and coordinates the appliance's electronic functions so your range/oven control responds correctly. It replaces a failed or unresponsive control module to restore normal electronic operation. What it does:

• Receives user commands and runs the oven/range control logic and display functions
• Manages heating cycles, timers, and safety interlocks controlled by the front panel
• Commonly replaces a board that causes unresponsive buttons, erratic display, or failure to start heating
• Helps resolve intermittent operation or electronic error codes tied to the control board

• Disconnect power at the breaker before accessing or replacing the board to avoid shock
• Handle the board by the edges and avoid touching components to prevent ESD damage
• Some wiring harnesses plug into the board; label connectors or take a photo before disconnecting