Parts for Lg LW1816HR/00: Room A / C Parts

This clamp secures a line or connection inside your appliance, maintaining a tight fit under vibration. Replacing a fatigued clamp helps prevent leaks or disconnections and keeps components anchored so the system operates reliably.

• Holds a line/fitting firmly to keep the joint sealed and secure
• Helps prevent leaks or disconnections at hose/tube connections
• Resists vibration that can loosen fittings during operation
• Replace if bent, weakened, or corroded, or if the connection repeatedly loosens

• Disconnect power and, if applicable, shut off water supply before service
• Note clamp orientation and routing; seat the clamp just behind the fitting bead/stop
• Use the correct tool for your clamp style to compress or tighten evenly
• After reassembly, restore utilities and test for leaks or movement

This synchronous motor assembly drives the washer's rotating components, restoring proper agitation and spin so laundry cycles complete correctly. It replaces a failed drive motor to get noisy or non-spinning machines moving again. What it does:

• Converts electrical input into smooth, timed rotational motion for the washer drive system
• Enables agitation and spin functions so the tub rotates during wash and spin cycles
• Stops intermittent or no-rotation symptoms caused by a failed motor
• Eliminate humming, grinding, or lack-of-spin issues originating from the drive motor

• One synchronous motor assembly

• Disconnect power and water supply before starting any repair
• Take a photo of wiring and bracket locations to aid reassembly; handle connectors gently
• Secure mounting screws and check that the motor coupling and any belts are aligned per the service manual

This horizontal louver directs airflow inside the appliance to help even cooling and prevent direct blasts on food. It restores proper air distribution when vent fins are broken or stuck. What it does:

• Guides refrigerator/freezer airflow for more even temperature distribution
• Replaces cracked, warped, or missing horizontal vent slats
• Helps reduce cold spots caused by misdirected air
• Visible damage or a louver that won't hold position are common symptoms

• One horizontal louver

• Disconnect power before servicing to avoid electrical hazards
• Remove nearby shelves or drawers for access if needed
• Typically snaps or slides into the vent housing; align and seat gently to avoid breaking tabs
• Inspect surrounding clips and housing; replace if damaged

This air cleaner filter assembly replaces the refrigerator's air filtration module to help keep interior air fresher and reduce common food odors. It restores the filter housing and sealing surface so the filtration element works as intended. What it does:

• Holds and seals the refrigerator air filter cartridge to direct airflow through the filter media
• Helps capture food odors and airborne particulates inside the fresh food compartment
• Restores proper fit when a damaged or missing housing causes bypass or poor sealing
• Supports normal airflow for the fridge's air circulation system

• Unplug the appliance or disconnect power before servicing
• Locate the filter assembly per your owner's manual; remove the old assembly before installing the replacement
• Verify the filter cartridge seats fully and the housing gasket compresses for a proper seal

This remote controller assembly replaces a damaged or lost TV remote so you can restore basic control functions like power, volume, input and navigation. It's a direct-fit replacement designed to work with the original remote circuitry. What it does:

• Sends infrared/remote signals to control TV power, volume, channel/input selection and menu navigation
• Replaces remotes with cracked buttons, missing keys, or worn-out housings
• Fixes symptoms like unresponsive buttons, intermittent control, or no remote response from the TV
• Works as a drop-in replacement for the original remote circuitry and button layout

• Insert fresh batteries (check polarity) before testing
• Some models may require a short pairing or initial setup—follow the TV's remote pairing steps if needed
• Handle the assembly carefully to avoid static damage; do not force connectors
• Dispose of old batteries and electronic parts properly per local regulations

This display control board (PCB assembly) drives the user interface, powering the screen/indicators and reading button inputs. Replacing a failed board restores a visible, responsive display and dependable control of settings.

• Powers and manages the front-panel display and indicator lights
• Reads button/touch-key inputs from the user interface
• Communicates selections to the main control for execution
• Common symptoms of failure: blank or dim display, flickering segments, unresponsive or intermittent controls, settings not updating

• Disconnect power before servicing; allow any capacitors to discharge
• Use ESD protection and handle the board by its edges; avoid flexing the PCB
• Note/photograph wiring and connector orientation; transfer any reusable brackets or light guides as needed
• Seat all connectors fully and verify operation before final reassembly

The Main PCB Assembly is an OEM part for LG air conditioners. This PCB assembly manages all the functions and operations of the air conditioner. It processes inputs from the control panel and sensors, regulating the temperature, fan speed, and cooling cycles to ensure efficient and optimal performance.

Causes of a bad Main PCB Assembly can include electrical surges, moisture damage, or wear and tear over time. 

Symptoms of a bad Main PCB Assembly include:

• The air conditioner not turning on or off
• Unresponsive or malfunctioning control panel
• Error codes displayed on the control panel
• Irregular or unpredictable cooling performance
• The unit not responding to temperature settings or remote control commands

This OEM LG part is also compatible with some Kenmore models.

This Guide Assembly, Air is an OEM part designed specifically for LG air conditioning units. Its primary function is to facilitate proper airflow direction and distribution within the air conditioning system, ensuring optimal cooling or heating performance.

Over time, this part may encounter issues due to extended usage or physical damage, leading to potential misalignment or restriction of airflow. Moreover, the accumulation of dust, dirt, or debris within the assembly can impede its functionality, ultimately affecting the unit's overall efficiency.

Symptoms indicating a bad guide assembly, air include:

• Inadequate cooling or heating output
• Uneven air distribution across the room
• Unusual sounds emanating from the air conditioning unit during operation
• Visible signs of damage or misalignment in the guide assembly

This OEM LG part is also compatible with some Sears/Kenmore models.

The Blower Wheel Assembly is an OEM part for LG room air conditioners. It is responsible for circulating air throughout the room as part of the cooling process. 

The multi-bladed wheel works by propelling air down and out of vents to promote air mixing and heat exchange. Over continuous summers of operation, the fan motor, housing, and plastic blades become susceptible to breakdown. 

Symptoms of a bad blower wheel assembly include:

• Airflow reduction impacting the ability to cool a space
• Louder operation as bearings and blades deteriorate
• Vibration transferring to the overall unit structure

Causes can be poor blade alignment inhibiting balance, cracked housings exposing components to moisture, or weakened fan motor winding insulation.

This OEM LG replacement ensures optimized circulation for comfortable, efficient cooling. It is also compatible with some Sears/Kenmore and Kenmore-branded air conditioners.

This condenser assembly is the refrigerant heat-exchange component that helps remove heat from the system so your refrigerator can maintain proper cooling. It replaces a damaged or corroded condenser to restore efficient heat dissipation. What it does:

• Transfers heat from the refrigerant to the surrounding air so the cooling cycle can operate effectively
• Helps prevent compressor overheating by allowing proper condenser airflow
• Commonly replaced when coils are bent, corroded, leaking, or clogged with debris
• Can reduce cooling loss and long run cycles caused by a compromised condenser

• One condenser assembly

• Disconnect power to the appliance before beginning any repair
• Condenser edges and fins are sharp; wear gloves and eye protection
• May require removal of the lower access panel, fan shroud, or mounting brackets for access

The Thermistor Assembly is an OEM part for LG air conditioners. It is typically located near the evaporator coil or in the air intake area of the unit. It measures the ambient temperature and sends signals to the control board to adjust the cooling output accordingly.

Causes of a faulty or malfunctioning thermistor assembly can include normal wear and tear, exposure to extreme temperatures, or electrical issues. These factors can lead to inaccurate temperature readings, improper cooling performance, or erratic behavior of the air conditioner.

Symptoms of a bad thermistor assembly may include:

• Inconsistent cooling or insufficient cooling
• Inaccurate temperature display on the control panel
• Frequent cycling on and off of the compressor

This OEM LG part can also be used on Kenmore/Sears appliances. 

This installation kit includes the manufacturer-specified hardware used to secure and align an appliance during setup. Use it to replace missing or damaged install hardware and restore a safe, stable, factory-correct fit in the opening. What it does:

• Provides required mounting hardware for proper installation
• Helps prevent shifting, rocking, or tipping when the appliance is used
• Aids in correct alignment and spacing within the cabinet/opening
• Replaces lost or damaged original install parts

• One installation kit

• Disconnect power (and gas/water, if applicable) before starting
• Follow your model's installation instructions for bracket locations and fasteners
• Use appropriate anchors for wall/floor material as specified by the manufacturer
• After installation, verify the unit is level and securely anchored