Dishwasher Foreign Objects Tub Pump Parts

This top panel is the painted metal trim that fits above the cooktop and under the control console, restoring the range's exterior look and protecting internal components from spills and heat. It's a direct-fit replacement when the original is dented, rusted, or damaged. What it does

• Covers and protects the area beneath the control console and behind the cooktop
• Restores appearance after dents, rust, or cosmetic damage
• Helps prevent debris and spills from entering internal controls
• Maintains correct spacing and alignment for the control console and related components

• Includes: 1 top panel

• Remove power to the appliance before starting any work to avoid electrical shock
• Typical installation requires removing the control panel and lifting the cooktop; keep fasteners organized
• Handle the painted surface carefully to avoid scratching; use a soft cloth or padding

The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures that dishes are thoroughly cleaned and rinsed by optimizing coverage and water intensity according to the cycle selected.

Causes of a bad Diverter Motor can include electrical failures, mechanical wear over time, or damage from water infiltration.  

Symptoms of a bad Diverter Motor include:

• Dishes not being cleaned properly due to insufficient water reaching all areas.
• Unusual noises coming from the dishwasher, which may indicate a struggling or stuck diverter motor.
• Error codes displayed on the dishwasher that are related to water distribution functions.
• Leakage from the dishwasher base 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Circulation Motor is an OEM part for Whirlpool dishwashers. It is responsible for pumping water through the spray arms to ensure thorough cleaning of dishes during the wash cycle. This motor helps maintain consistent water pressure and flow, crucial for effective dishwashing performance.

Over time, the circulation motor can fail due to factors such as motor wear, electrical issues, or blockages that cause the motor to overheat or become damaged. Regular use and the buildup of debris or hard water deposits can also contribute to motor failure.

Symptoms of a bad circulation motor include:

• Poor cleaning results
• Unusual noises during the wash cycle
• Water not circulating properly
• Dishwasher not completing cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Restore strong spray performance with this circulation pump and motor assembly. It drives wash water through the spray arms, helping your dishwasher clean effectively and run more quietly when the original pump is worn or seized.

• Circulates wash water through the spray arms during wash and rinse cycles
• Maintains proper water pressure for effective cleaning coverage
• Common failure signs: poor cleaning results, spray arms not spinning, loud humming/grinding, or leaks from the pump area
• Replaces a non-running or intermittently running wash motor

• Disconnect power and shut off water supply before servicing
• Access is typically from the front underside; remove the toe panel/kick plate to reach the pump at the sump
• Expect residual water; place a towel or pan before loosening clamps/locking ring and electrical connectors
• Ensure the sealing surface is clean, seat the assembly fully, lock in place, reconnect hoses/wiring, and check for leaks on test run

The Pump and Motor Assembly is an OEM part for Whirlpool dishwashers. This part is responsible for circulating water during the wash cycle and draining water at the end of the cycle.  

Causes of a bad assembly can include blockages from debris, electrical failures, or wear and tear from regular use.  

Symptoms of a bad Pump and Motor Assembly include:

• Dishes remaining dirty after a wash cycle
• Water not draining properly from the dishwasher
• Unusual noises during operation
• Error codes related to water flow or pump performance

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Sump and Motor Assembly is an OEM replacement part for LG dishwashers. As a functional pumping component, it circulates water and removes debris during dish cycles.

Symptoms of a bad sump and motor assembly can include:

• Inability to properly fill or drain water from the dishwasher
• Leaks or excessive pooling of water inside the unit 
• Loud knocking or grinding noises from the motor area

Causes of failure may involve a clogged or cracked sump housing impairing flow, or wear of the motor bearings degrading power output over time.

This genuine OEM LG part is also compatible with some select Kenmore brand models.

This chopper assembly replaces the food-chopping component in compatible countertop food processors, restoring even chopping and diced results. It helps get blades turning and keeps food processing performing as intended. What it does:

• Spins and chops food inside the processor bowl for consistent results
• Restores proper cutting when chopping is uneven or not happening
• Helps eliminate food buildup that causes noisy or inefficient operation
• Works with the existing drive coupling to transfer motor power to the blades

• Disconnect power and remove the processor bowl and lid before servicing
• Handle blades carefully — they are sharp; wear cut-resistant gloves
• Ensure the part seats fully on the drive coupling and locks into place before use
• Test operation with small amounts of food after reassembly; stop immediately if unusual noise or resistance occurs

This drain impeller spins inside the drain pump to move wastewater out of the appliance, restoring normal draining and reducing standing water. It's a direct-replacement pump impeller designed to fit the original pump housing. What it does:

• Drives water through the drain pump so the washer can empty properly
• Worn or broken impellers can cause slow or no draining and standing water
• May produce unusual pump noise or vibration when damaged
• Helps prevent motor overload by maintaining proper water flow

• One drain impeller

• Disconnect power before accessing the pump assembly to avoid electric shock
• Inspect the pump housing and fasteners; replace any damaged clips or seals as needed
• Reassemble pump and test a short drain cycle before completing the repair

The Drain Motor Assembly is an OEM part for Bosch dishwashers. The drain motor assembly is responsible for draining dirty water from wash cycles and filling the dishwasher with clean water for the next use.

Symptoms of a bad drain motor assembly can include:

• Dishwasher failing to completely drain wash water
• Continuous running or buzzing drain motor sounds
• Accumulation of standing water at the bottom

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a replacement washer drive motor that powers the tub to spin and agitate, restoring normal wash and spin cycles. Fits specified GE top-load washers and matches OEM form and function. What it does

• Spins the wash tub to perform spin cycles and remove water
• Powers the agitation/oscillation action during wash cycles
• Commonly replaced when the washer won't spin, won't agitate, or hums without turning
• Helps eliminate intermittent power-to-motor issues when motor failure is the root cause

• One replacement drive motor

• Disconnect power before starting any repair to avoid electric shock
• May require removing the washer cabinet or access panels and detaching the old motor wiring and mounting screws
• Handle carefully — support the tub/drum as needed during motor removal and reinstallation

This pump assembly replaces a failed drain pump to restore normal water removal and prevent standing water in the appliance. It fits the OEM mounting and plumbing locations for a direct swap when compatible. What it does:

• Pumps and drains water from the appliance during drain cycles
• Helps prevent standing water, slow drains, and related odors
• Commonly linked to symptoms like no-drain cycles, persistent water in the tub, humming or grinding noises from the base, or water leaks near the pump
• Works as the mechanical link between the appliance plumbing and the drain system

• Disconnect power and water supply before beginning any repair
• Expect to remove an access panel and disconnect hoses and wiring; keep fasteners organized
• Inspect hoses and seals during installation and replace any brittle or damaged components to avoid leaks

The Dishwasher Sump Assembly is designed for Samsung dishwashers, ensuring your appliance operates smoothly and efficiently. This genuine OEM part guarantees a precise fit, restoring your dishwasherGÇÖs ability to drain water effectively and maintain optimal performance. Crafted from durable materials, the sump assembly helps prevent leaks and manages water flow efficiently, enhancing the overall reliability of your dishwasher. Installing this part is straightforward, allowing you to quickly address any issues without the need for professional assistance. The Dishwasher Sump Assembly is compatible with a variety of Samsung dishwasher models, ensuring that you find the right match for your specific appliance. By choosing this genuine OEM part, you benefit from the quality and performance that Samsung is known for, extending the lifespan of your dishwasher and ensuring spotless, clean dishes every cycle. Whether youGÇÖre replacing a damaged or worn-out sump assembly, this component offers a dependable solution, providing peace of mind and maintaining the excellent functionality of your Samsung dishwasher.

The Pump-Drain is an OEM part for Whirlpool dishwasher modules. It serves as the water pump that actively removes dirty water from the wash chamber, directing it to the garbage disposal or home drainage system. 

Causes for a faulty Pump-Drain can stem from mineral buildup clogging impeller fins over time. Wear and tear on seals or electrical failure of motor components are also possible from prolonged usage.  

Symptoms of a bad Pump-Drain include:

• Incomplete draining or water remaining after cycles
• Strange gurgling or grinding noises during drain phase   
• Leaks detected around the drain hose connection
• Soap scum or film left inside from inadequate rinsing

This OEM replacement part works with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore dishwasher models as well.