Dishwasher Upper Rack Rollers Parts

The Tine Row Holder is an OEM part for Whirlpool dishwashers. It is responsible for securing the tines in the dishwasher's rack, keeping them in place to hold dishes, glasses, and utensils securely during the wash cycle.

Over time, the tine row holder can become damaged due to normal wear and tear, repeated loading and unloading of dishes, or accidental mishandling.

Symptoms of a bad tine row holder include:

• Tines that are loose or fall out of place
• Difficulty in loading dishes securely
• Uneven or inadequate cleaning due to improperly spaced items

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Lower Dishrack is an OEM part for Whirlpool dishwashers. It provides space for arranging and securely holding your dishes during the dishwashing cycle.

A bad lower dishwasher dishrack can be caused by regular wear and tear, exposure to hot water and cleaning agents, or accidental damage. If you notice rusting, chipping, or broken tines on the dishrack, it may indicate a problem with the rack itself.

Symptoms of a bad lower dishwasher dishrack include:

• Rust stains or residue on your dishes after a wash cycle
• Difficulty in loading or unloading dishes 
• Unstable or wobbling dishes during the wash cycle
• Limited space or reduced capacity for dishes

Replace your faulty lower dishwasher dishrack with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Dishrack Stop is an OEM part for Whirlpool dishwashers. This part prevents the upper dishrack from being pulled out too far, acting as a safety stop to keep the rack securely in place. One stop per package. Located at the end of the rails that hold the upper rack.

Causes of needing to replace the Dishrack Stop can range from it breaking or becoming dislodged due to excessive force or mishandling, to general wear and tear over time.

Symptoms of a bad or missing Dishrack Stop include:

• The ability to pull the dishrack completely out of the dishwasher tub
• The dishrack becoming dislodged or falling out during operation
• Potential damage to the dishwasher interior or the dishrack itself

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This upper rack wheel assembly helps the dishwasher's upper dishrack roll in and out smoothly. Replacing a worn wheel restores proper rack movement and prevents jamming that can stress the adjuster and rails.

• Allows the upper rack to glide smoothly on the rail
• Helps correct a sticking, wobbly, or uneven upper rack
• Can reduce grinding or squeaking noises when sliding the rack
• Address difficulty fully extending or retracting the upper rack

• Disconnect power and turn off water before servicing
• Pull the upper rack out; release the rack end stops as directed in your model's service info
• Swap the old wheel assembly for the new one; ensure it locks securely to the rack or adjuster
• Reinstall end stops and test rack travel before restoring power

The Tine Clip is an OEM replacement part for Whirlpool dishwashers. This clip is designed to secure the tines in the dishwasher rack, keeping them properly aligned to hold dishes and utensils in place during the wash cycle. It ensures stability and maximizes the rack's capacity and efficiency.

Symptoms of a bad Tine Clip include:

• Tines becoming loose or collapsing during the wash cycle
• Difficulty in organizing dishes due to unstable tines
• The clip appearing cracked, broken, or missing

Causes of a failing Tine Clip can include regular wear from repeated use, stress from heavy loads, or accidental damage during loading and unloading. A damaged clip may lead to inefficient cleaning and reduced rack usability.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Upper Spray Arm Pivot Shaft is an OEM part for LG dishwashers. This part allows the upper spray arm to rotate and distribute water evenly throughout the upper rack during the washing cycle.

Causes of a bad part can include wear and tear over time, damage from foreign objects, or improper installation or alignment.

Symptoms of a bad Upper Spray Arm Pivot Shaft include:

• The upper spray arm not rotating or spinning
• Poor water coverage and cleaning performance in the upper rack
• Loud grinding or squeaking noises coming from the upper rack area

This OEM LG part is also compatible with some Kenmore models.

The Dishrack Roller is an OEM part for GE dishwashers. Mounted within the side walls, this plastic roller guides the dish rack in and out smoothly during loading and unloading. 

Symptoms of a bad dishrack roller include:

• Difficulty pulling or pushing the rack in and out of the tub
• Squeaking or grinding noises produced during rack movement    
• Rack jams or fails to fully extend on retrieval

Causes stem from normal wear of the roller bearing over repeated uses. The durable plastic material is carefully designed for quiet, seamless sliding.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This dishrack wheel lets the dishwasher rack glide smoothly in and out. Replacing a worn or broken wheel restores easy rack movement and helps keep the rack aligned during loading and unloading.

• Provides rolling support for the dish rack inside the rail/track
• Helps keep the rack level and properly aligned
• Common symptoms include rack hard to slide, wobbling/sagging rack, or a cracked/missing wheel
• Can reduce scraping or clicking noises when moving the rack

• Disconnect power before servicing; remove the rack from the tracks as needed
• Release the old wheel from its axle/retainer; note its orientation
• Snap the new wheel onto the existing axle/retainer and ensure it spins freely
• Reinstall the rack and test for smooth operation

This wheel mount assembly fits the dishwasher's upper rack track and provides the roller that lets the rack glide in and out. Replacing a worn or broken mount restores smooth movement and keeps the rack aligned on the rails. What it does:

• Supports and guides the upper rack along the side rails
• Replaces cracked, missing, or seized rollers that make the rack hard to slide
• Helps prevent the rack from popping off the track or sitting unevenly
• Can reduce scraping or squeaking noises when moving the rack

• One upper rack wheel mount assembly

• Disconnect power to the dishwasher before servicing
• Open the door and remove the upper rack by releasing the rail stops
• Depress the locking tab to remove the old wheel mount from the rail; align and snap the new assembly into place
• Reinstall the rack and rail stops; check for smooth rack travel

The Dishwasher Tine Clip is an OEM part for Whirlpool dishwashers. It is designed to secure the tines in the dishwasher rack, keeping them in place to properly hold dishes, glasses, and other items during the wash cycle. This clip ensures that the tines remain upright and stable, providing organized and effective loading of the dishwasher.

You should replace the dishwasher tine clip if it becomes damaged or lost. Causes of a bad tine clip can include wear and tear from regular use, breakage from heavy loads, or damage from the high temperatures and detergents used during the wash cycles. A compromised tine clip can lead to tines that are loose or misaligned, affecting the dishwasher's ability to hold items securely.

Symptoms of a bad dishwasher tine clip include:

• Tines that do not stay upright or move out of place
• Difficulty in properly loading items into the dishwasher rack
• Items tipping over or not being held securely during the wash cycle
• Visible damage or breakage of the clip

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the complete lower dishrack that slides in and out on the tub rails. It provides a stable place to load plates, bowls, and larger cookware on the bottom level and restores smooth rolling and proper dish placement when the original rack is worn or damaged.

• Holds and organizes dishes on the lower level of the dishwasher
• Restores smooth rolling and proper alignment of the lower rack
• Common failure signs include broken or rusted tines, wobbling or derailed rack, and difficulty rolling the rack in/out
• Helps when dishes are not staying in place or the rack no longer supports loads properly

• Disconnect power before servicing
• Pull the old rack straight out of the tub; transfer any usable accessories if applicable
• Slide the new rack onto the existing rail tracks; ensure wheels are seated on both sides
• Test smooth movement and clear door closure before running a cycle

This leveling leg adjusts the dishwasher's height at the base, helping you level and stabilize the unit inside the cabinet. Proper leveling reduces rocking and vibration and promotes a tight door seal and smooth rack operation.

• Screws into the base frame to set height and level the dishwasher
• Supports the unit to prevent rocking or wobbling
• Helps maintain door alignment and sealing; poor leveling can contribute to leaks
• A worn, bent, or missing leg can make leveling difficult and increase vibration/noise

• Disconnect power and shut off water; slide the dishwasher out if needed for access
• Turn the leg with a wrench or pliers to adjust height; replace by threading the new leg into the base
• Use a bubble level to set side-to-side and front-to-back level before re-securing the unit
• Do not overtighten; ensure both legs carry weight evenly on a solid floor surface

This wheel mounting strip secures the rack rollers to the dishwasher rack, keeping the rack aligned and rolling smoothly in and out. Replacing a worn or broken strip restores proper rack support and slide action.

• Holds multiple rack wheels in position along the rack edge
• Helps prevent sagging, binding, or uneven rack movement
• Common fix for racks that derail, feel wobbly, or won't roll smoothly
• Durable molded piece designed for the rack's wheel row

• Disconnect power and water before servicing
• Remove the rack, then transfer wheels from the old strip to the new one
• Snap or fasten the strip to the rack as designed; verify wheel rotation
• Check rack travel on both rails before returning to service

The Dishrack Roller and Axle Assembly is an OEM part for Whirlpool dishwashers. This part facilitates the smooth movement and operation of the upper dishrack inside the dishwasher tub.

Causes of a bad Dishrack Roller and Axle Assembly may stem from wear and tear over time, damage from misuse or improper loading, or debris accumulation hindering the rollers' movement.

Symptoms of needing to replace the Dishrack Roller and Axle Assembly can include:

• Difficulty in sliding the dishrack in or out of the tub
• Excessive noise or grinding sounds when moving the dishrack
• The dishrack becoming stuck or not rolling properly on the track

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Grey. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For white use WP676453. For tips use 676458.

Note: Right Hand side with release lever.