Dishwasher Front Panel Parts

This keypad is the user-facing button assembly for the oven control panel, letting you send cooking commands and change settings. It restores responsive button control so the range accepts inputs and starts selected functions. What it does:

• Provides the tactile buttons used to enter bake, broil, timer and temperature commands
• Replaces worn or unresponsive keys that won't register presses or skip inputs
• Fixes issues where the control panel won't respond or certain functions won't start
• Works with the control board to relay user selections to the oven electronics

• One keypad (button assembly) as shown

• Disconnect power to the appliance before beginning any service to avoid shock
• Remove control panel trim or bezel as required to access and disconnect the keypad ribbon or connector
• Handle the keypad and ribbon gently to avoid tearing or bending contacts
• Test the keypad operation after reconnecting power and reassembling the panel

This 10-button switch assembly replaces the worn or unresponsive front control buttons on compatible Frigidaire appliance control panels, restoring reliable push-button input and normal user control of cycle and function selections. What it does:

• Replaces cracked, stuck, or non-responsive push buttons on the appliance control console
• Restores tactile button feedback and reliable electronic input to the control board
• Helps regain access to oven/range or console functions that won't register when buttons fail
• Fits into the front user interface assembly to provide a like-for-like button layout

• Always disconnect power to the appliance before beginning repair to avoid shock or damage
• Installation typically requires removing the control panel or console; handle the assembly and ribbon connector with care
• Inspect connectors and mating surfaces for damage or debris before installation

This control panel assembly houses the user interface and electronic controls that operate your appliance, restoring responsive button and display functions for accurate cycle selection and status feedback. What it does

• Replaces a worn or unresponsive front control interface to restore button input and display visibility
• Hosts the touchpad/buttons, status LEDs or display, and connections to the main control board
• Commonly used when buttons won't register, the display is blank or erratic, or settings won't change
• Interfaces with the appliance's main control to send user commands and show cycle information

• Disconnect power (and gas if applicable) before starting any repairs to avoid shock or injury
• Handle the assembly carefully to avoid damaging connectors, ribbon cables, or the display
• Verify connector seating and routing of any ribbon cables during reassembly; do not force connectors
• If electronic problems persist after replacement, test or replace the main control board as needed

This control panel is the console assembly that houses the oven/range touch controls and display, restoring the user interface so you can set temperatures, timers and modes reliably. What it does:

• Provides the touchpad buttons and digital display for selecting oven or range functions
• Sends user commands to the appliance's control board so cycles and settings start as selected
• Commonly replaced when buttons are unresponsive, the display is blank or characters are missing
• Also used when the panel is cracked, cosmetically damaged, or the control surface is worn

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Handle the assembly carefully to avoid damaging the display or ribbon/connector cables
• Installation typically involves removing trim and disconnecting/reconnecting wiring harnesses; retain all fasteners

The Control Panel is an OEM replacement part for Whirlpool dishwashers. It serves as the touchpad and houses the selection buttons, electronic controls, and display. This panel allows users to choose cycles, set options, and monitor the wash cycle.

Frequent use, moisture exposure, or accidental impact can lead to deterioration over time. Damage to the control panel can cause issues like cracks, broken buttons, or misalignment that affect the user interface.

Color: Black

Symptoms of a faulty Dishwasher Control Panel include:

• Cracked or broken panel housing
• Buttons or touchpad are irresponsive
• Difficulty pressing buttons or selecting cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement insert restores the finished trim and proper fit where the original trim or panel insert is cracked, missing, or worn. It helps return a clean, secure appearance and supports adjacent panels. What it does:

• Replaces a damaged or missing trim/insert piece to restore appearance and fit
• Helps eliminate visible gaps and prevents adjacent panels from shifting
• Reduces rattling from loose trim pieces during operation
• Preserves the original mounting alignment for nearby components

• Disconnect power to the appliance before starting any work
• Remove any surrounding trim or panels carefully to access the insert; keep fasteners for reuse
• Install by aligning with existing mounting tabs/slots and secure with original hardware; do not force into place

This interior trim insert restores a finished look and helps secure adjacent components in your appliance. It replaces a damaged, cracked, or missing insert so panels fit properly and appearance is restored. What it does:

• Covers or fills a small opening in the appliance cabinet or interior trim
• Holds or aligns surrounding panels to reduce rattling and movement
• Restores a clean, finished appearance after wear or breakage
• Common symptom: visible gap, loose trim, or a broken plastic piece where panels meet

• High-level, do-it-yourself friendly: usually accessed from the interior or by removing adjacent trim panels
• Use appropriate hand tools; avoid force that could crack surrounding trim
• Disconnect power if working near electrical components or lights

This control panel is the user-facing interface that holds the appliance's buttons and display, restoring a clear, responsive control surface for selecting cycles and options. It replaces a cracked, faded, or unresponsive panel to improve usability. What it does:

• Provides the physical buttons and display area for selecting cycles, options, and settings
• Restores tactile button response and readable indicators when the original panel is damaged or worn
• Addresses symptoms such as stuck or non-responsive buttons, cracked or cosmetic damage, and unreadable labels
• Works with the appliance's existing electronic controls and wiring harness

• Disconnect power to the appliance before beginning any work to avoid shock
• Remove the console or access screws as required; handle painted or plastic finishes carefully to avoid scratching
• Reuse factory fasteners and verify tab alignment before fully tightening
• If buttons or display still don't work after replacing the panel, test the underlying control board and wiring harness

This control panel is the appliance's front user console that holds the touchpad, buttons and display so you can select cycles and view status. Replacing a damaged or unresponsive panel restores normal control and readouts. What it does:

• Houses the touchpad/buttons and display used to set cycles and options
• Sends user commands to the main control board so the appliance responds to selections
• Replaces panels showing cracked buttons, faded labels, or stuck keys
• Helps address symptoms like unresponsive controls, erratic behavior, or a blank/partial display

• Disconnect power (unplug or shut off breaker) before starting any work
• Handle the display and ribbon/connector gently; avoid bending contacts
• May require removing outer console or trim; keep screws and clips organized

This kick plate assembly replaces the lower access panel on compatible refrigerators and dishwashers to restore a finished look and protect internal components at the appliance base. It provides a clean, secure cover for the toe-kick area. What it does:

• Covers and protects the lower cabinet opening and components from dirt, debris, and accidental contact
• Restores the appliance's finished appearance at the base for a seamless look
• Helps direct airflow from vents located at the toe-kick area
• Replaces damaged, dented, or missing lower access trim to improve safety and aesthetics

• One kick plate assembly

• Remove power to the appliance before attempting removal or installation
• Typically fastens with clips or a few screws; retain hardware if reusing or replace if damaged
• Handle carefully to avoid scratching painted or plated surfaces during installation

This part is a bezel and cover console assembly designed for use with dishwashers. This component is located at the top of the dishwasher and allows users to make changes to cycle preferences. It protects the buttons underneath the part and adds extra protection to the appliance. The most common reason to replace the bezel and cover console assembly is if it has become cracked or otherwise damaged.First, pull out the dishwasher and make sure it has been unplugged. While the dishwasher is out from under the cabinetry, disconnect the door springs so the door can be removed. The inner and outer panels and hinges will need to be separated to access the bezel and cover control assembly. Remove this entire part and slowly replace it using the new component. Work slowly to avoid damaging the plastic tabs. Once this part has been installed, reassemble the rest of the dishwasher. Reconnect power and push the appliance back in before use.The bezel and cover console assembly is designed to replace the original on General Electric dishwashers. It's sold as a single part. This is an authentic OEM component that has been directly sourced from the manufacturer.

This console assembly is the appliance's user control panel that houses the display and touch/button interface, restoring normal control and feedback when the original console is damaged or unresponsive. What it does

• Replaces a damaged or cracked front control console so buttons and the display can be used reliably
• Restores responsive button/touch input when controls become unresponsive or sticky
• Fixes issues where the display is dim, unreadable, or not showing feedback from selections
• Helps resolve intermittent control behavior tied to a failed console interface

• One control panel (console assembly)

• Disconnect power to the appliance before beginning any repair to avoid shock
• Removal typically requires access to the appliance console and disconnecting the wiring harness; save all screws and fasteners
• Handle the new console carefully to avoid damage to the display or control surfaces

Color: Black

This inner door assembly replaces the damaged or cracked inner panel on your refrigerator/freezer door to restore a clean interior surface and proper component mounting. It's the factory-style inner panel used behind the outer door skin. What it does:

• Forms the interior surface of the door and provides mounting points for bins, shelves, and hardware
• Restores a smooth, sanitary interior when the original panel is cracked, warped, or separated
• Helps keep door components aligned to prevent rattling or improper sealing
• Compatible with OEM door hardware and trim when original mounting points are intact

• Installation requires removing the door and outer door trim; handle screws and wiring may need to be disconnected
• Inspect and transfer any clips, gaskets, bins, or fasteners from the old panel
• Use proper support to avoid dropping the door; get a helper for safe handling of heavy doors
• Disconnect power and follow manufacturer safety instructions before servicing