Dishwasher Upper Rack Rollers Parts

This shaft-and-pinion assembly uses a 10-tooth pinion to transfer drive through the geartrain. Replacing a worn or stripped unit restores proper gear mesh and smooth, reliable power to the driven components.

• Transfers motor rotation through the geartrain via a 10-tooth pinion on a precision shaft
• Maintains correct gear engagement and alignment to minimize noise and wear
• Typical symptoms: grinding/clicking from the gearcase, output not turning or slipping under load, intermittent drive, or visibly rounded/broken teeth
• Can also reduce wobble or excessive play at the driven shaft

• Disconnect power before servicing; wear cut-resistant gloves and eye protection
• Access the drive/gearcase, note gear order and orientation (take photos for reference)
• Inspect mating gears and bushings; clean debris and replace any worn parts
• Apply manufacturer-specified grease to the gear teeth/bearings and confirm smooth rotation by hand before reassembly

Color: gray. Measures about 3 inches high by 2-1/2 inches deep.

Color: gray. Measures about 3 inches high by 2-1/2 inches deep.

This replacement basket restores organized storage inside your appliance. It securely holds items in place to prevent tipping or falling through, helping you load, access, and clean with confidence.

• Provides a dedicated compartment to keep smaller items contained and upright
• Replaces a cracked, warped, or missing basket
• Helps prevent items from contacting moving parts or obstructing spray/airflow
• Common signs it's time to replace: broken tabs, split seams, or the basket no longer seats correctly

• Disconnect power before servicing
• Open the appliance and remove the old basket; retain any reusable brackets or rack components
• Seat the new basket fully into its designated location
• Do not overload; verify it's stable and clears moving parts before use

The Wheel is an OEM part for Whirlpool dishwashers. This wheel attaches to the dishwasher rack, facilitating smooth and easy movement of the rack in and out of the dishwasher.  

Causes of damage to the Wheel can range from normal wear and tear, which eventually wears down the plastic, to overloading the rack with dishes, which can cause excessive stress and breakage.  

Symptoms of a failing Wheel include:

• The dishwasher rack jams or becomes difficult to move.
• A wheel falls off or appears visibly broken or damaged.
• The rack tilts or becomes unstable due to a missing or damaged wheel.
• Noises such as scraping or thumping when the rack is moved.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This left-hand dishrack support mounts to the rack/rail assembly to hold the rack level and guide it in and out. Replacing a worn support restores smooth rack travel and proper alignment to prevent binding, sagging, or derailment.

• Supports the dishrack on the left side and keeps it level
• Helps the rack slide smoothly without catching or rubbing
• Replaces a cracked, warped, or missing support
• Common symptoms: rack falls off track, binds when sliding, sits unevenly, or makes scraping noises

• Disconnect power and turn off water before servicing
• Pull the rack forward, remove it from the rails, and release the old support's locking tabs/fasteners
• Snap or fasten the new support in the same orientation; reinstall the rack and check for smooth travel

The Tine Row Clip is an OEM replacement part for Whirlpool dishwashers. This part secures the lower basket's tine rows in place to properly support dishes during cleaning. The tight fit of the tine row clip is crucial for optimal functionality of the lower dish rack. This clip is used to hold the tines in place on a dishwasher rack.

Causes of a bad tine row clip can include wear and tear leading to cracks or breaks, or damage from impact if the lower rack is mishandled.

Symptoms of a bad tine row clip include:

• Loose or unstable lower dish rack
• Dishes sliding around or falling through the lower rack during the cycle
• Noise from racks or pieces moving inside the tub
• Difficulty loading or removing dishes from the lower rack

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

Note: Shaft has been revised by the factory and the spring is no longer used.

This replacement dishrack restores secure loading and proper spacing so wash water reaches every item. Replacing a bent or rusty rack helps prevent tipped dishes and marks from flaking rust, and keeps loading/unloading smooth when the rack rollers are intact.

• Holds plates, bowls, and cups in place during wash and rinse cycles
• Maintains spacing for spray coverage and drying airflow
• Rolls in and out along the rails when paired with functional rack rollers
• Common symptoms include broken or bent tines, flaking coating or rust, items tipping, or difficulty sliding the rack

• Disconnect power to the dishwasher before servicing
• Open the door, pull the rack forward, release rack stops/end caps if present, and slide the old rack off the rails
• Transfer any reusable accessories from the old rack to the new rack as required by your model
• Slide the new rack onto the rails, reinstall rack stops, and verify smooth travel before running a cycle

The Adjuster Assembly (RH) is an OEM part for Whirlpool dishwashers. This right-hand adjuster assembly is responsible for adjusting the height of the dishwasher's upper rack, allowing for flexibility in loading various dish sizes and improving cleaning efficiency.

Causes of a bad adjuster assembly include wear and tear from frequent use, damage due to overloading the rack, or breakage of the plastic components.

Symptoms of a bad Adjuster Assembly include:

• Difficulty in adjusting the upper rack height
• The upper rack not staying in the desired position
• The rack being uneven or unstable
• Issues with loading and unloading dishes

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Wheel is an OEM replacement part for Whirlpool dishwashers. As an important component of the upper dishrack assembly, this wheel helps by supporting and guiding rack movement.

Causes of a bad wheel can include cracks or deformities from normal wear and tear over repeated use. Without functioning wheels, the upper dishrack risks malfunctions such as catching, sticking, or difficulty sliding smoothly during cycles.

Symptoms of a bad wheel include rack issues:

• Inability to rotate or glide effortlessly when loading/unloading.

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Adjuster Axle is an OEM part for Whirlpool dishwashers. It plays a crucial role in the height adjustment mechanism of the upper rack, allowing users to customize the rack's position to accommodate different dish sizes. This axle ensures that the adjustment is smooth and stable, providing flexibility in the dishwasher's loading capacity.

You should replace the adjuster axle if it becomes worn out or damaged. Causes of a bad adjuster axle can include wear from frequent adjustments, breakage from overloading the rack, or damage from mishandling.

Symptoms of a bad adjuster axle include:

• Difficulty in adjusting the height of the upper rack
• The rack not staying in the desired position
• Unusual movement or instability of the rack
• The adjuster mechanism not functioning properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Keep utensils organized and secure during the wash. This dishwasher silverware basket replaces a cracked or missing basket so flatware stays upright for thorough cleaning, helps prevent small items from slipping through the rack, and streamlines loading. What it does:

• Holds silverware and small utensils in the rack throughout wash and rinse cycles
• Keeps pieces separated and upright to improve cleaning and drying performance
• Helps prevent loose items from contacting the spray arm or falling to the tub bottom
• Replace if the basket is cracked, warped, or missing sections, or if utensils tip over or come out dirty

• 1 silverware basket

• No tools required: slide out the rack, lift out the old basket, and set the new basket in the same location
• Ensure the basket is seated securely and does not interfere with spray-arm rotation
• Load knives and sharp items with points down; avoid nesting spoons for best results

This is one half of the silver basket. For a complete basket you will need to order two(2).

The Leveling Foot is an OEM part for Bosch dishwashers. It is designed to provide stability by allowing you to adjust the height of the dishwasher, ensuring it is level on uneven flooring.

Causes of a bad leveling foot can include wear and tear over time, damage from excessive force or impact, or thread stripping from frequent adjustments.

Symptoms of a bad leveling foot include:

• The dishwasher rocking or wobbling during operation
• Difficulty in achieving a level position
• Increased noise or vibration when the dishwasher is running

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Specs: B-16 HXW 1/2 SS