Dryer Control Panel Lcd Parts

Main electronic control board that manages an appliance's functions, timing and user interface. Replacing this circuit board restores proper operation when controls fail, the display is blank, or cycles run erratically. What it does:

• Interprets user inputs (buttons/knobs/touchpad) and sends commands to the appliance's systems
• Controls timing, sequencing and power to motors, valves, heaters and sensors
• Drives the display and status indicators so cycle information and error messages appear correctly
• Common symptoms: unresponsive controls, no display, appliances that won't start or that run unpredictably

• Disconnect all power before handling or replacing the board to avoid shock or damage
• Handle the circuit board by the edges and avoid touching components; static discharge can damage electronics
• Confirm harness connectors seat fully and match the OEM connector locations during reassembly

This electronic control is the refrigerator's main control board that manages temperature, timing, and user inputs for reliable operation. Replaces a failed control to restore proper cycling and display responsiveness. What it does:

• Receives signals from sensors and user controls to regulate compressor and defrost cycles
• Manages temperature setpoints and timed defrost operations
• Powers and updates the front display and touchpad responses
• Stops or prevents normal operation when the control fails, causing no display, unresponsive buttons, or continuous running

• Disconnect power to the appliance before beginning any repair to avoid shock
• Handle the board carefully; avoid touching circuit traces and use anti-static precautions
• Installation typically requires removing the control panel or console; keep track of mounting hardware

This control panel assembly replaces the oven's front console that houses the keypad and display, restoring user controls and readable status feedback for the range. It's a direct-fit console component used to operate oven functions. What it does:

• Provides the front-mounted keypad and display interface for setting temperature, timers and oven modes
• Replaces a cracked, unresponsive, or incorrectly displaying console to restore normal controls
• Carries the underlying wiring connections and mounting points for secure installation
• Works with the oven's electronic control board to send user commands

• Disconnect power at the breaker before starting any repair to avoid shock
• Remove oven trim or mounting screws to access and unplug the existing control panel harness
• Handle the display and glass surfaces carefully to avoid damage or fingerprints

This electromechanical oven timer controls oven timing and clock functions so you can set cook times and get audible alerts. It replaces a worn or nonworking timer to restore timed cooking features and on/off cycle control. What it does:

• Advances and times bake/roast cycles and provides a visual clock/remaining-time display
• Sounds the timer alarm when a set cook time completes
• Allows timed automatic shutoff for timed cooking cycles
• Restores user control when the original timer fails to advance or does not chime

• Disconnect power at the breaker before starting any repair to prevent shock
• Access typically requires removing the control panel; handle the timer and wiring gently
• Note and match wire locations before disconnecting; use proper connectors when reattaching

This is a dryer timer. The part is used to control the dryer's cycles. If this part is damaged or faulty, the dryer may skip cycles, fail to complete them, or get stuck in a particular cycle.Although the dryer timer tends to be durable, there's a chance that it could wear out over time. It could also become damaged from misuse. Before beginning the repair, unplug the dryer.The dryer time will work with models from GE. This is a genuine OEM replacement part. It was sourced from the manufacturer, and it is sold individually.

This trim ring is a replacement surface trim piece that restores the finished look and edge around the appliance opening. It provides a clean, secure edge and replaces bent, cracked, or missing trim to improve appearance and fit. What it does

• Covers and finishes the exposed edge of the appliance opening for a clean appearance
• Secures and aligns adjacent components by providing a stable mounting edge
• Addresses cosmetic damage such as dents, cracks, or paint loss around the opening
• Helps prevent small items from getting caught in the exposed edge

• One trim ring

• Disconnect power to the appliance before starting any repair
• Removal typically requires loosening mounting screws or clips; keep hardware for re-use unless damaged
• Handle edges carefully; part and surrounding metal may be sharp
• If the trim mounts to or around other components (elements, panels), support those parts during removal and reinstallation

This rear panel is the replacement cabinet back panel that restores the appliance's exterior enclosure and supports internal components. It provides a clean, secure rear surface and helps protect internal wiring and parts from damage. What it does

• Replaces a dented, rusted, or damaged rear cabinet panel to restore proper enclosure and airflow
• Shields internal components and wiring from dust, debris, and accidental contact
• Helps maintain proper venting clearance and appliance stability when mounted correctly
• Prevents sharp edges and gaps that can cause injury or allow pests into the cabinet area

• Disconnect power (and gas if applicable) before servicing; ensure appliance is fully de-energized
• Remove rear access screws and any attached components carefully to avoid damage
• Align panel, secure with manufacturer-specified fasteners, and verify there are no gaps or pinched wires

This white backsplash assembly restores the finished rear appearance of a range and helps protect the wall from spills, splatters, and heat. It provides a clean, factory-fit rear cover for affected models. What it does:

• Covers and protects the rear wall area behind the range from grease, food splashes, and light heat exposure
• Restores the appliance's factory appearance when the original backsplash is damaged or missing
• Secures to the range frame to provide a finished mounting surface for rear components on applicable models
• Prevents debris from entering gaps between the appliance and wall

• Disconnect power (and gas, if applicable) before beginning service
• Remove screws or fasteners holding the old backsplash; save hardware for reassembly if reusable
• Handle edges carefully; use proper hand tools and follow the appliance wiring/part diagram

This mechanical timer controls and advances cooking/wash/dry cycles so your appliance runs through its programmed steps. Replaces a failed or intermittent timer to restore normal cycle selection and timing control. What it does:

• Advances the appliance through timed cycles so each step runs for the correct interval
• Routes power to the appropriate circuits at the correct times
• Stops or fails to advance when worn or faulty, causing the appliance to remain stuck in one cycle or not start
• Commonly used when cycle selection knob turns but the machine does not progress or selected functions don't engage

• Disconnect power (unplug or shut off breaker) before installing to avoid shock
• Remove control panel/knob to access and replace the timer; keep track of mounting screws and any brackets
• Transfer wiring exactly as removed; take a photo before disconnecting to ensure correct reassembly

This timer is the electromechanical control that sequences a washer's wash, rinse and spin cycles, restoring proper cycle advancement and timing for affected machines. Use this direct-fit replacement to regain reliable cycle control and predictable operation. What it does:

• Rotates through and switches washer cycle stages (fill, agitate, drain, spin) to control timing
• Replaces a worn or failed timer that causes cycles to stop, not advance, or skip functions
• Restores timed operation when a washer won't complete cycles or starts intermittently
• Interfaces with controls and motors to coordinate cycle transitions

• Disconnect power before attempting service to avoid shock or injury
• Access may require removing the control panel or console
• Retain all mounting hardware and note wiring positions; replace exactly as removed

This electromechanical timer controls the sequencing and duration of appliance cycles, restoring timed operation for wash/dry/cook functions depending on application. Replaces a worn or non-advancing timer to help return your appliance to normal use. What it does:

• Rotates through cycle positions to start and stop functions at set intervals
• Sends power to motors, heaters, or pumps according to the selected cycle
• Common symptom: appliance fails to advance through cycles or stops mid-cycle
• Common symptom: timer knob feels loose, won't click, or won't engage selected settings

• Disconnect power before servicing to avoid shock hazard
• Follow your model-specific service manual for disassembly and timer alignment
• Verify terminal connections and wiring harness fit before applying power

This decorated control panel is the exterior face for the oven/range control area, restoring a clean, readable surface and button markings for accurate use. It replaces a cracked, worn, or discolored control face to improve appearance and usability. What it does:

• Provides the finished front surface for the appliance control area so buttons, timers, and display cutouts are clearly labeled.
• Restores legible button markings and printed graphics that can wear off with age or cleaning.
• Helps prevent dirt and moisture from reaching the internal control electronics when properly installed.
• Common symptoms: faded or missing button labels, chipped or cracked panel, cosmetic damage to the control face.

• High-level replacement only; remove power (unplug or disconnect breaker) before starting.
• Handle panel edges and printed surface carefully to avoid scratching or damaging graphics.
• Keep screws and mounting clips organized during disassembly for proper reassembly.

Color: Silver

This electronic control is the main circuit board that manages appliance functions and user interface signals, restoring reliable operation when the original board has failed. It replaces a faulty control to help return normal cycle selection and timing. What it does:

• Powers and coordinates user commands, sensors, and motors for normal appliance operation
• Regulates cycle timing, display indicators, and electronic functions
• Commonly replaces a board that causes unresponsive buttons, error codes, or no display
• Helps stop erratic cycles, unexpected shutdowns, or failure to start when board failure is confirmed

• One electronic control board

• Disconnect power before accessing the control area to avoid shock or damage
• Handle the board by edges; avoid touching contacts or components
• Verify connectors match and seat fully; replace any damaged harnesses or mounting hardware

This electronic control board regulates oven functions and user interface, restoring consistent controls and cycle operation. It replaces a failed console module to help return accurate temperature control, timed cooking and display responsiveness. What it does:

• Reads user inputs and sends commands to bake/ broil/ convection elements and timers
• Manages oven temperature regulation by communicating with sensors and relays
• Restores display, touchpad or knob-responsive controls and cycle selection
• Resolves symptoms like unresponsive controls, incorrect cycle starts, or intermittent operation

• Disconnect power at the breaker before starting work to avoid shock
• Ground yourself and handle the board by edges to protect against static damage
• Minor disassembly of the console or back panel is typically required; retain all screws and connectors