Refrigerator Control Panel Lcd Parts

This encoder board assembly interprets user input from the range/oven control console and sends the correct signals to the appliance control system, restoring reliable button/knob response and control selection behavior. What it does:

• Converts knob/button movements into electronic signals the main control can read
• Helps ensure accurate selection of temperature, modes and timers
• Common symptom: controls are unresponsive or selections don't register
• Common symptom: erratic or intermittent control behavior when using the console

• Disconnect power at the breaker before starting any work
• Handle the board carefully and avoid static discharge; ground yourself or use an anti-static strap
• Keep track of screws and mounting hardware; label harnesses or take photos before disconnecting
• Reconnect harnesses fully and test function before reassembling the console

This electronic main control board coordinates your refrigerator's cooling system and user interface. Replacing a failed board can restore stable temperatures, proper defrosting, and responsive controls across the refrigerator and freezer compartments. What it does:

• Regulates compressor and fan operation using sensor feedback to maintain set temperatures
• Controls automatic defrost cycles to prevent frost buildup
• Interfaces with the human-machine interface (HMI) for button/display functions
• Common failure symptoms: fridge/freezer too warm, compressor or fans not running, unresponsive or erratic controls, or repeated relay clicking

• 1 main electronic control board assembly

• Disconnect power before servicing; use ESD protection when handling electronics
• Photograph wiring and move connectors to the new board one at a time; transfer any jumpers or mounting parts from the original
• Ensure all connectors are fully seated and covers reinstalled before restoring power
• After installation, set temperatures and allow up to 24 hours for cooling to stabilize

A replacement PUR-BETA control module that restores control for the refrigerator's PUR water/dispense/filter functions so the dispenser, filter status and related signals operate properly. What it does:

• Manages electronic signals for the PUR filtration and dispenser circuitry
• Communicates filter status and reset information to the fridge control system
• Controls/coordinates water and dispenser-related functions tied to the PUR system
• Common symptoms of a failing module include unresponsive water/ice dispenser, persistent filter-status light, or intermittent dispenser operation

• Always disconnect power (and water supply when applicable) before servicing to avoid shock or water damage
• Handle the module carefully and avoid static discharge; use a grounded wrist strap if available
• Some panel removal and connector unplugging is required; keep track of screws and connectors

This electronic control board manages your refrigerator's core functions. It processes sensor inputs and directs cooling, defrost, and fan operations so temperatures stay consistent and the unit responds to the controls.

• Coordinates compressor, evaporator, and condenser fan operation for proper cooling
• Controls the automatic defrost cycle based on sensor feedback
• Can cause no-cool, intermittent cooling, or unresponsive controls when it fails
• May help with erratic temperatures, frequent cycling, or clicking from the control area

• Disconnect power before servicing; this is a sensitive electronic component
• Handle by the edges and use anti-static precautions
• Note/photograph wire connections and transfer one connector at a time
• Mount the board securely; restore power and verify normal operation per the service instructions

This electronic freezer control assembly manages the freezer's control functions and settings to help restore reliable temperature regulation and responsive controls when the original control fails. Designed as a direct replacement control module. What it does:

• Controls freezer functions and user settings by communicating with sensors and other system modules.
• Commonly replaces a failed control board when the freezer won't maintain temperature, cycles erratically, or displays control-related errors.
• Restores responsive control panel behavior when buttons or digital settings stop working.
• Used when diagnostics point to control/board faults rather than mechanical components.

• Disconnect power to the appliance before starting any repair to avoid shock or damage.
• Handle the control board carefully and avoid static discharge; use antistatic precautions if available.
• Match connector locations and wire harness orientation; ensure all plugs seat fully before restoring power.
• If symptoms persist after replacement, recheck wiring, sensors, and diagnostic codes before ordering additional parts.

This electronic control board is the appliance's main logic module, managing cycles, timing and the user interface to restore responsive controls and proper operation. Ideal when pushbuttons, displays or automatic functions fail. What it does:

• Controls cycle selection, timing and program sequences for the appliance's functions.
• Sends signals to motors, valves and heaters so components run at the correct times.
• Interfaces with the user controls and display; helps interpret button presses and touch inputs.
• Common symptoms this part can cause: unresponsive controls or display, stuck or non-advancing cycles, random errors or failure to start.

• One electronic control board

• Disconnect power before beginning work to avoid electric shock.
• Handle the board by the edges and avoid touching components; use an anti-static strap if available.
• Compare the replacement board to the original to ensure matching connectors and mounting points.
• Reassemble panels and verify operation.

Cold control that regulates cooling cycles to maintain set temperatures in the fresh-food section. Replacing a failed control restores more consistent temperature control and helps prevent food spoilage. What it does:

• Controls compressor/cooling cycles based on the selected temperature setting to maintain cabinet temperature.
• Common symptoms: refrigerator running constantly, not cooling, or temperature cycling irregularly.
• Interfaces with the fridge control housing and wiring to open/close the cooling circuit as needed.

• Disconnect power to the appliance before starting any repair.
• Access the control housing/panel to remove the old control; note wire locations or take a photo for correct reinstallation.
• Handle any attached sensor or capillary tube gently to avoid kinks or damage.
• After installation, restore power and the refrigerator reaches and holds the desired temperature.

This temperature control thermostat regulates your refrigerator's cooling by sensing cabinet temperature and cycling the compressor. Replacing a failed control restores consistent temperatures and normal on/off operation.

• Monitors cabinet temperature via a capillary sensing bulb
• Opens/closes electrical contacts to start and stop the cooling system
• Common symptoms of failure: too warm or too cold, runs constantly or won't run, no response to temperature dial, intermittent cooling
• Restores predictable cycling and temperature regulation

• Disconnect power before servicing
• Photograph/label wire positions; transfer any brackets/insulators from the original control
• Route the capillary tube exactly as original; avoid kinks and ensure the sensing bulb is secured in its clip/well
• After installation, set to a mid setting and allow up to 24 hours for temperatures to stabilize

This compressor board kit replaces the compressor's control board to restore reliable compressor start and run behavior. It helps address compressor start failures and intermittent cooling so the appliance can return to normal operation. What it does:

• Replaces the compressor control/relay board that manages compressor startup and operation.
• Can stop or reduce symptoms such as the compressor not starting, repeated clicking/humming, or intermittent cooling.
• Provides the electrical interface between the compressor and the appliance power/control circuits.
• Helps isolate electronic control failures from mechanical/sealed-system issues.

• Disconnect power to the appliance before beginning any service.
• Handle the circuit board by its edges and avoid static discharge; use basic hand tools.
• Verify harness and connector compatibility with the appliance before installing.

This temperature control assembly monitors and helps regulate appliance temperature so the unit maintains expected cooking/cooling performance and resolves temperature-related operation issues. It replaces a failed control to restore consistent temperature response. What it does:

• Senses and controls internal temperature to help maintain set points
• Can correct symptoms such as incorrect temperature, extended heat/cool cycles, or inconsistent performance
• Interfaces with the appliance control system to activate heating/cooling components as designed
• Mounts in the control area and connects to existing wiring harnesses for direct replacement

• Disconnect power to the appliance before starting any service
• Access may require removing the console or rear access panel; follow the service manual for your model
• Handle the control assembly and connectors carefully to avoid damage; match wire locations during reassembly

This power control board assembly regulates power and control signals for the appliance, restoring reliable electronic control and normal operation when the original board fails. It replaces a faulty main control to stop intermittent power or unresponsive controls. What it does:

• Supplies and distributes power to the appliance's control circuits
• Controls user interface and command processing for cycles and functions
• Can cause no-power, intermittent power, or failure to respond when faulty
• May trigger control-related error codes or unexpected shutdowns

• Disconnect all power before starting—risk of electric shock
• Handle the board by edges and avoid static discharge; use ESD protection
• Transfer connectors and any attached harnesses exactly as removed
• Test appliance operation and all functions after installation;

Color: White

This user interface assembly restores the front control panel and touch/display functions, so you can reliably set oven modes, temperatures, and timers. Fits dovetail-style front consoles in compatible ranges. What it does:

• Replaces the console's touch/display module that controls oven functions and shows settings
• Restores response to button presses and visible status indicators when the original is unresponsive
• Interfaces with the oven's control electronics to send user commands to the main control board

• Disconnect power to the appliance (unplug or switch off circuit breaker) before attempting any service
• Handle the display and ribbon cable carefully; avoid touching contacts or bending connectors

This mullion rail is the trim piece that secures and finishes the gap between refrigerator doors, improving seal alignment and giving the cabinet a clean, finished look. It restores proper door fit and appearance. What it does:

• Holds the mullion/trim in place along the door opening for a consistent seal and appearance
• Helps keep door gaskets aligned to reduce drafts and improve cooling consistency
• Prevents the trim from flexing or separating when doors are opened and closed
• Addresses visible trim damage, loose or missing mullion pieces, and uneven door gaps

• One mullion rail trim piece

• Disconnect power to the appliance before starting work to avoid injury
• Remove any door liners or screws that cover the mullion before replacing the rail
• Handle trim and clips carefully to avoid cracking; small retaining clips or screws may be reused if undamaged

Replacement cold control that restores temperature regulation in compatible refrigerators. Installs behind the temperature knob to control compressor cycling, helping stabilize interior temperature and stop constant running or temperature swings. What it does:

• Regulates refrigerator temperature by switching compressor/fan operation on and off.
• Replaces a failed temperature control that causes inconsistent cooling or interior temps that are too warm or too cold.
• Can stop issues like the compressor running continuously or frequent temperature fluctuations.
• Works with compatible refrigerator control housings and knobs.

• Disconnect power before replacing the control to avoid shock or injury.
• Note wire locations and knob orientation before removing; reconnect wires to the same terminals.
• Handle the control carefully and avoid bending or stressing mounting tabs and contacts.
• After installation, restore power and verify proper cycling and temperature stabilization.