316902214 Parts

This screw and nuts set is a genuine MTD part, sold individually. This screw and nuts set can be used as a replacement part in a string trimmer. This set provides a variety of screws and nuts which serve as fastening components within the string trimmer.The screw and nuts set in a string trimmer might have to be ordered as a complete replacement part if one or more screws or nuts in the string trimmer has been lost, misplaced, or damaged. If this occurs, the screw and nuts set should be ordered as a genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw and nuts set is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Bolens, and Yard Man.

This o-ring is a genuine OEM part sourced from the manufacturer for use in many parts of engines in lawn and garden equipment. The o-ring is a type of gasket but is not flat like a gasket. It is circular and made of rubber. It is seated in a groove on the engine part and is compressed against another part to create a seal. This seal keeps air and fluids from entering or exiting the sealed part. Like gaskets, o-rings must be periodically inspected and replaced to ensure proper engine performance.Visual inspection of o-rings will reveal nicks, indentions, cuts, or tears on the surface of the o-ring. If the rubber has warped due to excessive heat, it will not fit properly and will need to be replaced. The replacement may not require tools, depending on the location of the rubber gasket. Remove the bad o-ring and wipe both sides of the area to remove the old grease. Apply fresh grease to the o-ring before installing it to ensure a tight seal. Press the new o-ring firmly in the groove before attaching the connecting part. If the ring does not seat well or has to be stretched to fit, discard and start with a new o-ring.The o-ring is sold individually. It is designed for trimmers and tillers. It is compatible with Craftsman, MTD, Bolens, Troy-Bilt, and Cub Cadet.

The design and purpose of the O-ring is relatively self-explanatory. It is an “O” shaped ring used as a gasket in lawn and garden equipment. It is designed to sit within a groove and be compressed during assembly. It creates a perfect seal that blocks the path of liquids or gases from escaping or flowing into regions of the machine where they are not supposed to be.The O-ring may be damaged if an outdoor piece of equipment is struggling to start or run. After checking the air filter cover, removing the carburetor, and cleaning it thoroughly, the next step is to replace the O-rings, carburetor gasket, and air filter, followed by the spark plug. Regular maintenance of the carburetor and routine evaluation of the suitability of the O-ring is essential to proper mechanical maintenance.This O-ring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this product is MTD. Examples of compatible products and machines includes trimmers, tillers, weed wackers, brush cutters, and leaf blowers or leaf vacuums. It is compatible for products made by the following brands: MTD, Cub Cadet, Craftsman, and Troy-Bilt.

This throttle cable is a used on string trimmers. This part links the carburetor assembly to the throttle trigger. Each throttle cable is made with a connector on each end. Over time, the throttle cable can be damaged or kinked through use. If this occurs, the cable will need to be replaced.Replacing the throttle cable will require basic tools and a set of work gloves. The first step to replacing the throttle cable is removing the original component. The throttle housing will need to be taken apart on each side of the string trimmer. The replacement cable will pass through the carburetor mounting plate hole and the engine housing before reassembling the rest of the parts.This throttle cable is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The throttle cable is made for use with string trimmers manufactured by Yard Machines, MTD, Craftsman, Murray, Yard-Man, Bolens, and Cub Cadet.

This is an insulator assembly includes the insulator, seals, and hardware. It is designed to create the right spacing between the cylinder and carburetor on many blowers and trimmers made by various manufacturers. The insulator assembly also keeps heat from moving between the other components. Over time, the insulator assembly can become damaged or crack. When this occurs, air can reach the engine and create a condition where the engine can't perform at its best. If this happens, the insulator assembly will need to be replaced. Take off the air filter, drain the fuel, and remove the intake assembly. The insulator can be taken off of the engine before the replacement is added. Use mounting screws to fit the insulator to the other components. Reassemble the other parts to use the tool.This insulator assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. This component is made to be used in leaf blowers, tillers, and string trimmers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

This replacement part is an o-ring. It is a genuine replacement part made by MTD. O-rings are small but are a very important part of many appliances. These rubber rings are placed around parts that have spaces in their vicinity. This blockage created by the O-ring allows gas and air to stay within the engine or appliance. Otherwise, it might escape and cause issues during use. A new o-ring might be needed if the current ones are missing or becoming thin. This is common in many appliances. If there is a noticeable amount of air or gas escaping the appliance then it might be caused by a gap where an o-ring should be. This o-ring is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM part sourced directly from the manufacturer.

The ignition coil replacement module assembly is used in lawn trimmers. It creates charges of high pulses of electric current. The ignition coil's current sends the voltages down the spark plug wire to the spark plug and then the engine. Signs the ignition coil may need replacing include poor performance, inability to engage the machine, and unusual noises. An ignition coil will wear out with routine use, or it can become damaged with improper usage. Replacing the ignition coil in a trimmer requires a screwdriver, socket set, adjustable wrench, and star bit screwdriver. Allow the engine to cool completely before disassembly. It can be achieved in about 30 minutes. Wear gloves for safety. Make notations of all removed pieces for easier reassembly after the replacement part has been installed.This replacement module is an authentic OEM part sourced from the manufacturer. It is compatible with several different lawn equipment brands, including MTD, Cub Cadet, and Troy-Built. The module is found in numerous trimmer machines. The replacement part is sold individually as one module assembly. Included with the assembly are the screws, spark plug boot, and rubber insulated wire. The piece is made from durable plastic and metal.

This replacement part is cutting line. It is a genuine replacement part made by MTD. This part is used in lawnmowers to ensure clean, even cuts during use. Cutting line might be needed if the user desires a more professional look when cutting grass. This line is used to create lines so the user may follow the pattern while working. Be sure to purchase enough of the cutting line to ensure it fits the entire yard. Be sure to find other resources on how to use the cutting line prior to putting it to use. This cutting line is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This replacement part is a drive shaft intended for use in various lawn equipment. This is a genuine replacement part made by MTD. Drive shafts are responsible for rotating the cutting head on the appliance so that the user is able cut a clean line while mowing or cutting grass.A new drive shaft might be needed if the user notices that the cutting head is no longer rotating, or is unable to start. If the cutting head stops spinning in the middle of using the appliance, the drive shaft might need replacing. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.