Gleb30t8cba Frigidaire Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255006
The Heating Element is an OEM part for Frigidaire ovens and ranges. It is responsible for providing the heat necessary for baking or broiling. The element converts electrical energy into heat through resistance; this heat is then distributed throughout the oven cavity to cook or bake food evenly.
Common causes of a bad Heating Element can include visible signs of damage like blistering, bulging, or breakage. A burnout may occur when the element overheats and fails, leading to no heat production. Additionally, electrical issues like a blown fuse or faulty wiring can prevent the element from receiving power.
Symptoms of a bad Heating Element include:
- The oven does not heat up
- Uneven cooking or baking
- Longer cooking times than usual
- The element not glowing when the oven is turned on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees Mark R. • Eastham , MA • May 15, 2015
One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it...
Read more
More
$146.95
- Compare At:
-
$176.34
- You Save:
-
$29.39
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$16.90
- Compare At:
-
$18.82
- You Save:
-
$1.92
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255605
The Broil Element is an OEM part for Frigidaire ovens and ranges. It is specifically designed to provide the high heat necessary for broiling food, such as meats and vegetables. Located at the top of the oven interior, the broil element radiates heat downwards, creating a high-temperature environment ideal for browning and caramelizing the exterior of dishes while locking in juices.
Over time, the broil element can burn out or become damaged due to high temperatures and frequent use.
Symptoms of a bad Broil Element include:
- Lack of heat when broiling
- Uneven cooking or browning of food
- Visible damage or breaks in the element
- No visible glow from the element during operation
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$128.95
- Compare At:
-
$152.16
- You Save:
-
$23.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 316490001
The Sensor Probe is an OEM part for Frigidaire ovens and ranges. This sensor is essential for monitoring the oven's internal temperature and communicating with the control board to maintain accurate cooking temperatures. It helps ensure that your oven heats to the desired setting and maintains consistent temperatures throughout the cooking process.
You should replace this sensor probe if it becomes faulty. Common issues that lead to a bad sensor probe include regular wear and tear, exposure to high temperatures over extended periods, or electrical failures within the sensor itself. Physical damage from accidental impacts during cleaning or maintenance can also compromise the sensor's functionality.
Symptoms of a bad sensor probe include:
- Inaccurate oven temperature readings
- Oven not reaching the set temperature
- Error codes related to temperature control
- Oven overheating or underheating
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Won't start
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Oven temperature was not consistant and varied at the same setting Robert T. • Palm Beach Gardens , FL • October 13, 2014
I replaced the probe which is a thermocouple. Naturally the connector was different from the one on the stove so I cut off the connector on the old probe and soldered it to the new probe. The cleaning of the wires and soldering them was the most time consuming activity of the repair.
My wife just tried the stove and the oven temperature read exactly as the setting.
Read more
More
$56.23
- Compare At:
-
$66.91
- You Save:
-
$10.68
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400
The Oven Light Socket is an OEM replacement part for Frigidaire electric ranges and wall ovens. It houses the bulb that illuminates the interior of the oven cavity.
Causes of a bad light socket can include a loose or broken connection due to regular use, scorched or burnt terminals from overheating, or damage from moisture.
Symptoms of a bad light socket include:
- The oven light not turning on when activated
- Flickering or intermittent bulb operation
- Signs of corrosion or oxidation around the bulb base
- Excessive heat emission from the light area
This OEM Frigidaire replacement part is also compatible with ranges and wall ovens from Electrolux, Gibson, and Kelvinator.
Do-It-Yourself Stories from Customers like You
Light socket inside oven broke Linda S. • Novato , CA • June 02, 2015
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm!
Read more
More
$51.23
- Compare At:
-
$61.48
- You Save:
-
$10.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 318394803
Has three terminals.
Do-It-Yourself Stories from Customers like You
Oven light stayed on when door was closed Robert S. • Jacksonville , IL • June 14, 2015
When trouble shooting the problem I found that the light switch housing outer lip was broken allowing the switch to push through mounting surface behind the oven door. This is a slide in range so, I proceeded to pull the range away from the counter where I could unplug the power cord. Once the power was off like located the panel on the right upper side of the unit and removed the screws to allow access to the switch. I then unplugged the switch from the wiring harness and removed the damaged...
Read more
More
$49.95
- Compare At:
-
$59.94
- You Save:
-
$9.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 316008401
Size: 3/4 inch od x 1/4 inch id.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
$10.56
- Compare At:
-
$11.62
- You Save:
-
$1.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 318022001
This OEM part is a relay control board for ovens. An oven relay control board is a circuit board that receives signals from the main oven control board. The relay control board then relays the signal to regulate the oven's essential functions. Over time, a relay control board can become overworked. If the oven is no longer turning on, heating properly, or regulating its temperature, it might be time for a new relay board. Luckily, replacing this part is not a difficult process. To replace the relay board, make sure the oven is unplugged. Gain access to the upper back panel on the back of the range and remove the screws. Once the panel is removed access the relay board and remove the wire harness as well as any individual wires attached to the old board. Make sure to take note of the orientation of the wires. Replug the wires into their correct terminals on the new board and snap the new board back in place. Resecure the upper back panel.This genuine replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore brand ovens.
Do-It-Yourself Stories from Customers like You
Relay boards on both wall ovens were bad baking element on both ovens would not work Andy S. • Kingsport , TN • September 22, 2014
Andrew helped me trouble shoot the problem. First I replaced the elments but that did not fix the problem. When I spoke with Andrew he told me how to test the OHMS on the new and old element and they were both readying 26 OHMS. I then replaced the control panel for the clock and oven controls. This did not fix the problem. The next step was to replace the relay boards. We placed numbers on the wires (~30) to avoid confusion. Taking notes also helped. Replacing both relay swithces took...
Read more
More
$287.55
- Compare At:
-
$339.31
- You Save:
-
$51.76
Genuine Frigidaire part
By: Frigidaire
Part Number: 318004900
This thermal switch is a temperature-sensitive safety device used in many ranges and wall ovens. It opens or closes an electrical circuit at a set temperature to protect internal components and help maintain safe operation. What it does:
- Monitors temperature and opens/closes a circuit at a specified threshold
- Protects the appliance from overheat conditions
- Cuts power to heating circuits or controls a cooling/vent fan, depending on model
- Common symptoms of failure include: oven or certain functions won't run, unit shuts off mid-cycle, or operation returns only after cooling
What's included:
Install notes:
- Disconnect power at the breaker before servicing
- Access location varies by model
- Move wires over one at a time to the new switch and secure it firmly to its mounting surface
- After replacement, verify proper airflow and cooling to prevent repeat overheating
Do-It-Yourself Stories from Customers like You
Oven would not hold temperature Catherine U. • Richmond Hill , GA • November 16, 2015
After 2 repair men, many parts replace it still didn't work, Did research on line and found out the thermal fuse would need to be replace..
Read more
More
$49.95
- Compare At:
-
$148.85
- You Save:
-
$98.90
Genuine Frigidaire part
By: Frigidaire
Part Number: 318053103
Length: Approx. 82 1/2"
Do-It-Yourself Stories from Customers like You
18 year old oven; works great but racks ugly/discolored and impossible to clean well enough; door seal flattened and discolored Cathryn S. • Breckenridge , CO • September 01, 2018
Bought two new racks - beautiful! Bought replacement door seal: watched simple video and installed new seal in less than 10 minutes. Extremely pleased and impressed with entire experience as a first-time customer.
Read more
More
$97.65
- Compare At:
-
$116.20
- You Save:
-
$18.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 316136600
This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
Oven won't turn on, control board failure convection motor failure Jonathan O. • Lorena , TX • November 12, 2018
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out.
Read more
More
$14.44
- Compare At:
-
$17.18
- You Save:
-
$2.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 318317100
This adapter assembly joins and aligns mating parts inside the appliance so they fit securely and operate as designed. Replace a cracked or missing adapter to restore proper fit and eliminate looseness or misalignment after service. What it does:
- Provides the correct spacing and alignment between connected components
- Helps secure parts to reduce vibration, rattling, or shifting
- Restores proper fitment after a component replacement or repair
- Replace if the original is cracked, warped, or missing mounting features
What's included:
Install notes:
- Disconnect power and allow the appliance to cool before servicing
- Note the original orientation and take photos to aid reassembly
- Transfer any reusable screws/clips from the old part if needed
- Test fit and alignment before fully tightening fasteners
Do-It-Yourself Stories from Customers like You
Adapter damaged Jay S. • Orange Lake , FL • January 30, 2016
Lightning Delivery - inserted and used a hammer and screwdriver to tighten unit......
Read more
More
$58.21
- Compare At:
-
$69.27
- You Save:
-
$11.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303311202
This convection fan motor turns the oven's rear fan to circulate hot air during convection bake and roast. Replacing a failing motor restores even heat distribution and reliable convection performance.
- Drives the convection fan to move hot air throughout the oven cavity
- Helps maintain uniform temperature for faster, more even results
- Symptoms include the fan not running or intermittent operation in convection mode
- Can contribute to uneven baking or extended preheat times during convection cycles
What's included: One convection fan motor
- Disconnect power at the breaker or unplug the appliance before servicing
- Allow the oven to cool completely before beginning work
- Access point varies by model
- Note wire locations and fan blade orientation during removal; wear cut-resistant gloves due to sharp edges
Do-It-Yourself Stories from Customers like You
Top convection oven fan not working or heating. David S. • Belton , TX • November 24, 2017
Replaced door switch and motor.
Read more
More
$96.95
- Compare At:
-
$114.40
- You Save:
-
$17.45
Genuine Frigidaire part
By: Frigidaire
Part Number: 318365800
$63.95
- Compare At:
-
$76.74
- You Save:
-
$12.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 318095956
$99.68
- Compare At:
-
$119.62
- You Save:
-
$19.94