Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Rubber baffle prevents leaks at dishwasher tub corner. Replace if worn, cracked, or causing water leakage during wash cycles. Snap-fit design.
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman". I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it... Read more
Prevents water leaks at the dishwasher door corners during wash cycles. Replace if you notice leaking along the bottom of the door. Clips onto tub rail.
Replacement roller and axle kit for dishwasher lower racks. Includes 8 wheels and 8 axles. Replace when rollers are broken, cracked, or missing.
I never respond to these kinds of requests but I must respond to this one because of your superior service! The best story here was that I ordered the parts from AppliancePartsPros at 4:15 p.m. one day, and they were on my porch by 2:00 p.m. the next day!! I am very impressed, so please keep up the great work. I'll add that the prices were the best I found too. The dishwasher wheels replacement didn't require tools & took less than 15 minutes. The original design/materials are not very... Read more
Secures the end of the dishwasher rack slide rail. Replace if cracked, broken, or missing to prevent racks from sliding off track or misaligning.
Replaced the pump drain assembly Read more
Seals the bottom center of your dishwasher door to prevent leaks during wash cycles. Replace if water leaks from the door bottom. Verify fit by model.
Seals dishwasher door to prevent leaks during wash cycles. Replace if worn, torn, or causing water leakage. Press-fit installation, no glue needed.
My wife is attached to her old, simple, no bells and whistles dishwasher. When it started leaking from the bottom of the door, I looked up the possible fix and thought the price of the gasket probably out-valued the dishwasher. I thought that it was time to buy a new one. After looking at the prices of dishwashers (even with a Memorial Day sale) I was shocked at high they have gotten. The price of the gasket, which isn't even a third of the price of a bottom of the line DW, was looking even... Read more
Replacement roller and stud assembly for dishwasher racks. Installs on upper or lower rack to restore smooth gliding. Needed when rollers crack or studs break.
Ordered the clips that we easy to find on line. They can within a few days..and replaced them myself..didn't wait for my husband. Hardest part was getting the end caps off the metal rack to replace the rollers and clips. They fit in there spmehow. I used a screwdriver to get them out. Rest was a piece of cake Lol Read more
Fix a dishwasher that won't drain or keeps draining during fill. This solenoid armature controls the drain valve. DIY repair in about 45 minutes.
About a year ago my dishwasher during a cycle was emitting a horrible plastic burning smell. We stopped it mid-cycle, cleaned it out and tried to run a few more cycles after that and realized it wouldn't drain so it sat in my kitchen broken for a year. I finally got so fed up with washing dishes by hand that I took the whole dishwasher apart. Confirmed there were no blockages in any of the hoses etc. when it still didn't work I googled the problem, found this website and found that it must be... Read more
Prevents water leaks where the motor shaft enters the dishwasher tub. Replace if leaking during drain cycle. Confirm fit with your model number.
Removing the bottom panel and watching the internals while the washer was running revealed a small drip from what appeared to be a plastic cam that was attached to a solenoid. The water was dripping from the shaft the cam attached to down into the solenoid. Being a DIY guy I pulled the washer out, turned it upside down and inspected the effected mechanism. It appeared that there was a seal on the shaft that was leaking. The water leaking into the solenoid caused it to rust and stick. A quick... Read more
Fix a dishwasher that won't drain completely with this piston and nut valve assembly. Simple DIY repair when water remains in tub after cycles.
It is very simple to fix. All the blogs recommend replacement of this part but do not explain why. This is a normally open check valve that permits the water from inside the dishwasher to drain out, either once it gets too high or just general splash. When the machine drains the pump comes on and the check valve closes. If the check valve is damaged or worn (like mine was) some of the water can pump back into the machine. So really, the problem is not that the machine will not drain but... Read more
Push-on nut secures drain shaft seal and other fittings in your dishwasher. Replace if damaged, missing, or when installing a new shaft seal repair.
Dishwasher not draining or leaving water in the bottom? This pump and motor assembly circulates and drains water. 2-hour DIY repair with video guide.
I fixed it by installing a ge pump and motor assembly. it works fine Read more
The Hinge Arm Link is an OEM part for GE dishwashers. This component functions as a connection point between the dishwasher door and the hinge mechanism, allowing the door to open and close smoothly. The hinge arm link ensures that the door can bear the weight of itself, often laden with a mounted dish rack when fully loaded, without straining the hinges or misaligning.
Causes of damage to the hinge arm link often involve regular wear and tear from the constant motion of opening and closing the dishwasher door.
Symptoms of a bad Hinge Arm Link include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I watched the repair video and ordered the part ( I luckily ordered two links). The video was not exactly for my model dishwasher but I did follow the instruction for removal from the cabinet. Since my model was not shown, I was looking to see how the door spring and the Hinge Arm Link was supposed to be set up. I had the impression that the door spring and link was only on the right side of the dishwasher. I finally figured it out and took pictures of the set-up for the next time the link... Read more
Dishwasher not filling with water? A faulty water inlet valve is often the cause. This valve controls water flow into your dishwasher. 20-30 minute fix.
Removed the old one. ordered a new one from appliancepartspros.com on Thursday afternoon, had the part on my front porch by Friday afternoon and installed it the next Monday morning. After I determined the problem, actual time fixing was maybe 30 minutes. Read more
Replacement mounting screw for securing handles, panels, and internal components. Needed when original screws are stripped, lost, or broken during repairs.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Replacement silverware basket with handle for your dishwasher. Needed when original basket is cracked, broken, or has worn holes that let utensils fall through.
We ordered the item appliance parts pros said would fit our make/model. the part arrived in perfect condition faster than i could possibly imagine, and while it fit our machine, it was a big bigger than the original and it fits off-center, but i guess it works fine! excellent speed and ease of ordering. thanks Read more