Maytag 5000 Washer Mhwe500/W00 Parts

This OEM Replacement Part is an Adhesive designed for use in high-temperature areas of your Whirlpool appliances. Approximately 7.5 inches long, this white adhesive is suitable for securing parts such as grate feet, gaskets, and felt seals. It is especially useful, particularly in hot zones like a cooktop. The heat-resistant properties of this adhesive ensure that the bond integrity remains uncompromised even under high-temperature conditions.

Contained in a 3oz bottle, this adhesive forms a resilient bond between various components. It is commonly used in conjunction with gaskets, felt seals, and rubber feet. The RTV high temp silicone adhesive/sealant guarantees the safety and longevity of your appliance by ensuring a secure fit of parts exposed to high heat.

The Fuse is an OEM part for Whirlpool microwaves. It is a crucial safety component designed to protect the microwave from electrical surges and potential short circuits by breaking the circuit if the current flow exceeds safe levels.

Causes of a bad microwave fuse can include electrical surges, faulty wiring, or normal wear and tear over time. A blown fuse will render the microwave inoperable, as it cuts off the power supply to prevent further damage or hazards.

Symptoms of a bad microwave fuse include:

• The microwave not powering on
• The microwave stopping mid-operation
• No response from the control panel or keypad
• Sudden loss of power during use

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.

This replacement screw fastens panels and small components in Whirlpool appliances, restoring secure mounting and reducing vibration or rattling. Use it to replace a missing or stripped screw that's preventing proper assembly. What it does:

• Secures panels, brackets, and accessory parts to the appliance frame
• Prevents loose or vibrating panels that cause noise or misalignment
• Restores correct fit for doors, trim pieces, or internal supports
• Helps maintain safe, stable appliance operation when all fasteners are present

• Unplug the appliance or shut off power before accessing internal components
• Use the correct-size screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastics
• Keep removed hardware organized to ensure you reinstall all fasteners

Sometimes known as a chain tensioner, this kit is used to adjust the bar of a chainsaw, pruner, or pole saw to increase or decrease the amount of tension in the chain. Having an overly tense chain can cause friction with the bar, which could lead to an engine fire. A chain that is too loose has a chance of kicking back or even losing the chain mid-use, which would be incredibly dangerous. Chains naturally become looser over time, so be sure to regularly check the status of the chain. Having the right amount of tension is critical for the saw to work properly. Making adjustments is easy with our genuine OEM bar adjustment kit sourced straight from the manufacturer. Simply remove the clutch cover and find the adjustment assembly in the cover. Remove it and thread the new chain tensioner onto the assembly. Reassemble the clutch cover and be sure to line up all the corresponding parts. Compatible with Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is shipped individually and only a screwdriver is needed to make this repair.

This is a bar bolt used with several types of lawn and garden equipment. It is used to secure the bar to the housing of the unit. The metal bolt is made with durable components but corrosion, damage, or wear and tear can necessitate replacement. The bar bolt can also become stripped or fall apart and create issues with other components staying together.If the bar bolt appears to be damaged, has been lost, or is broken, it needs to be replaced. The replacement process will require a wrench since the bolt is designed with a hex head. Before making the replacement, make sure the equipment has been turned off and placed on a stable surface. Wearing work gloves, remove the old bar bolt before placing the new replacement component.This is a genuine OEM replacement part that has been sourced directly from the manufacturer. It is sold as an individual bolt. The bar bolt is designed to be used with string trimmers, pole prunes, and chainsaws manufactured by Poulan, Poulan Pro, Husqvarna, and Craftsman.

This adjustable pin bar is used on chainsaws and other lawn and garden equipment to ensure a blade is adjusted to the appropriate rate of tension. When the chainsaw blade is properly adjusted, it will cut faster and better. The pin bar is made out of a durable metal but can become damaged over time. If the pin bar is not working correctly or has broken, it will need to be replaced.If a chainsaw or pole pruner is no longer performing as well as it used to, the adjustable pin bar may need to be replaced. To replace this pin, the cover of the chainsaw will need to be removed. Take the gear that has the screw and pin bar on it out of the machine. Next, remove the broken adjustable pin bar and replace it with a new part. Reassemble the tool for it to be ready to use.This adjustable pin bar is designed for use on Craftsman, Poulan, Poulan Pro, and Husqvarna chainsaws, pole pruners, and string trimmers. It is a genuine OEM replacement component that is directly sourced from the manufacturer. The part is sold individually.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This nut is used to attach a mounting bar to a chainsaw or pole saw. The nut attaches in slightly different ways depending on the product, but it will feed a bolt that attaches the base of the bar to the pole or housing of the saw. If the nut becomes stripped or corroded due to exposure to the elements, it will need to be replaced. A socket wrench and a socket set are needed to install the part. simply screw it into the chain bar studs, making this a quick and easy replacement. The flat side of the nut should face outward to create a flush effect with the rest of the handle. The other side will fit into the bar. This part sold independently. It works with both Poulan and Husqvarna products and is a genuine OEM product sourced directly from the manufacturers.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in string trimmers, edgers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might eventually have to be replaced in the case that the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is lost or misplaced and its absence is noted by the operator, the screw should be replaced by this genuine OEM replacement part as soon as possible. If the screw is dented, cracked, punctured, or otherwise damaged, it should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This bar adjustment retainer is an integral part of the bar adjustment mechanism that assists with securing the screw in many kinds of lawn and garden equipment. The retainer is made of durable metal and is used to replace a faulty, broken, or damaged original part. Sometimes the bar adjustment retainer will break or become damaged and need to be replaced.If the retainer breaks, it can cause the bar adjustment screw to become damaged or stripped. Inspecting for damage requires taking apart the equipment. Use work gloves to remove the chain bar cover and get access to the retainer. Replace it with a new retainer and screw. The bar adjustment pin should be placed at the end of the screw. Thread the screw through until it catches on the retainer. Once that's complete, the other parts can be reassembled.This bar adjustment retainer is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The retainer is made to be used with string trimmers, edgers, hedge trimmers, pole pruners, and chainsaws created by Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

This is a genuine replacement oil filter screen that is made for use in select models of chainsaws. This oil filter is made of durable metal and looks like a spring, designed to hold the paper-like filter that catches the debris before it gets into the engine. This oil filter is exposed to a lot of dirt and debris buildup which is why it should be cleaned or replaced as part of routine maintenance. However, replacing the oil filter holder and housing may not need to be done as frequently. Inspect all parts during maintenance for proper operation. If the oil filter becomes damaged or clogged, it will need replaced. This is a genuine OEM oil filter that is manufactured by Craftsman and designed for use in select models of chainsaws from the brand, as well as select units from Poulan, Husqvarna, and Snapper. The oil filter is sold as a single part and does not include hardware or additional components. Be sure to allow the engine to cool entirely before performing repairs and wear gloves to protect the hands. Because the oil filter is a common replacement, some people will keep an extra on hand in case of emergencies.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.