Tfx24zra Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (373)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Run Capacitor

4.9 (61)

By: Ge

Part Number: WR55X24064

The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use.

Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation.

Symptoms of a bad Run Capacitor include:

The refrigerator compressor fails to start.
Unusual humming noises coming from the refrigerator.
The refrigerator cycles on and off more frequently than normal.
A noticeable increase in energy consumption as the refrigerator struggles to maintain the proper temperature.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Would not run led dimmed condenser fan would not run Pete M. • Santa Fe , NM • May 16, 2015

We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from... Read more

$50.95

Compare At:: $60.12
You Save:: $9.17

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Light Switch

4.9 (93)

By: Ge

Part Number: WR23X37285

The Light Switch is an OEM replacement part for GE refrigerators. It controls the interior light, turning it on when the refrigerator door is opened and off when the door is closed. This ensures proper illumination for visibility when accessing the refrigerator's contents.

A malfunctioning light switch can result from wear and tear, electrical issues, or damage caused by repeated use. Over time, the internal mechanism may fail, or the housing can crack, leading to improper operation.

Symptoms of a bad light switch include:

Interior light not turning on when the door is opened
Light staying on even when the door is closed
Flickering or inconsistent light operation
Difficulty pressing or releasing the switch

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Refrigerator light switch broken. W W. • Bettendorf , IA • April 20, 2020

I ordered a new switch from APP and fixed my fridge. However, the video posted for this repair on this site is not applicable to newer refrigerator models. I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch. So the correct method to replace the light switch in a newer model refrigerator is as... Read more

$19.03

Compare At:: $20.93
You Save:: $1.90

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Defrost Timer

4.8 (93)

By: Ge

Part Number: WR9X489

The Defrost Timer is an OEM part for GE refrigerators. It serves as a crucial component in managing the defrost cycle of the refrigerator, ensuring that frost buildup is regularly melted away from the evaporator coils. This timer periodically switches the refrigerator between cooling and defrost mode, helping to maintain efficient operation and prevent overcooling or excessive ice accumulation.

Symptoms of a bad Defrost Timer include:

Frost building up more than usual in the freezer compartment.
The refrigerator or freezer sections becoming too warm due to prolonged defrost cycles.
The refrigerator not transitioning out of defrost mode, leading to spoiled food due to inadequate cooling.

Causes of a bad defrost timer can include mechanical wear from continuous use, electrical failures that impede the timer’s operation, or simply aging components that no longer function reliably.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Won't start
Fridge runs too long
Frost buildup
Fridge too warm

Do-It-Yourself Stories from Customers like You Fresh foods section was not cooling but freezer was cold Cynthia B. • Loganville , GA • January 19, 2018

After reviewing a number of testimonials and your videos from your APP.com site I determined my most likely problem was either the defrost heater, thermostat, timer or possibly all three. The real challenge now began. Getting to the specific parts with my specific model number was a real challenge. It was not as easy as removing the light guard and 5 screws since my model had two Track Cant Shelf vertical rails restricting the removal of the back panel. Also, these rails could not be removed... Read more

$41.95

Compare At:: $49.59
You Save:: $7.64

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Lower Door Hinge Kit

4.9 (148)

By: Ge

Part Number: WR13X10020

The Lower Door Hinge Kit is an OEM part for GE refrigerators. This kit is essential for the proper functioning and alignment of the refrigerator door, providing the necessary support and pivot point for smooth opening and closing.

Symptoms of a failing Lower Door Hinge include:

The refrigerator door sagging or failing to close properly
Squeaking or grinding noises when the door is opened or closed
Resistance or difficulty when moving the door
Visible wear or damage to the hinge or surrounding area

Causes of a bad lower door hinge can include mechanical stress from frequent use, improper alignment or installation that increases wear, or corrosion from moisture exposure, which can weaken the metal components.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Fridge runs too long
Door won't open or close
Door sweating

Do-It-Yourself Stories from Customers like You Freezer door cam broken and issue closing door. J G. • Weeki Wachee , FL • March 24, 2017

I followed the directions on the video.....had to look at it a couple of time. Difficult to work lying on the floor for me, but the technique was spot on. I have now replace the door closing cams on the refrigerator door and the freezer door of the side by side unit. Thanks for such great instructions. Read more

$45.95

Compare At:: $54.56
You Save:: $8.61

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Light Socket

4.9 (22)

By: Ge

Part Number: WR2X9391

The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.

You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.

Symptoms of a bad light socket include:

The refrigerator light not turning on when the door is opened
Flickering or intermittent light operation
Visible damage or corrosion on the socket
The light bulb not fitting securely or falling out

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Light not working

Do-It-Yourself Stories from Customers like You Our light was flickering and didn't stop with a new bulb Dianne F. • Hampton , VA • February 14, 2015

I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house. Read more

$10.95

Compare At:: $12.92
You Save:: $1.97

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Cam Riser

4.9 (44)

By: Ge

Part Number: WR2X4901

The Cam Riser is an OEM part for GE refrigerators. It plays a crucial role in the door mechanism, helping to lift and align the door as it opens and closes. This ensures the door operates smoothly and maintains a proper seal, which is essential for the efficient functioning of the refrigerator.

Over time, the cam riser can wear out or become damaged. Causes of a bad cam riser can include frequent use, physical damage from heavy door loads, or general wear and tear of the plastic components.

Symptoms of a bad Cam Riser include:

Difficulty in opening or closing the refrigerator door
The door not staying aligned or sealing properly
Unusual noises when operating the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Door sweating
Door won't open or close

Do-It-Yourself Stories from Customers like You Refrigerator door was binding as it closed; would not close on its own John H. • Baldwinsville , NY • August 09, 2014

I determined that the cam riser had broken into two pieces. Finding the part was easy on the diagram on the website. It arrived less than 24 hours after it was ordered. Top hinge was removed and the door was placed on a set of horses. One bolt was removed from the bottom of the door, the pieces of the broken cam riser were removed and the new one installed. Door was replaced and top hinge rebolted. The door was off for about 5 minutes. I was very pleased with the service of Appliance Parts... Read more

$14.72

Compare At:: $25.40
You Save:: $10.68

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Drawer Slide Assembly

4.9 (38)

By: Ge

Part Number: WR72X207

The Drawer Slide Assembly is an OEM part for GE refrigerators. It allows for smooth and easy movement of the refrigerator drawers, ensuring convenient access to stored food items. It provides the necessary support and stability to hold the weight of the contents within the drawers. The slide measures approximately 16 1/4 inches long.

A bad Drawer Slide Assembly can occur due to wear and tear over time, excessive load strain, or damage caused by accidental mishandling. If the slide assembly becomes worn, bent, or broken, it can lead to issues such as difficulty in opening or closing the refrigerator drawers, as well as potential damage to the drawers or their contents.

Symptoms of a bad Drawer Slide Assembly include:

Sticky or stiff movement of the refrigerator drawers.
Drawer not fully extending or retracting.
Excessive wobbling or sagging when the drawer is pulled out.
Visible damage or wear on the slide assembly.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

For matching right hand side order WR72X206.

Do-It-Yourself Stories from Customers like You Left side drawer rail was cracked John B. • Lincoln , MI • April 15, 2016

Ordered the part through e-mail based on the model number of the frig. When the part arrived,I looked at the set up from the right side and follwed the process for the right. Took me one minute. Read more

$35.45

Compare At:: $42.89
You Save:: $7.44

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Condenser Fan Motor

5.0 (35)

By: Ge

Part Number: WR60X187

The Condenser Fan Motor is an OEM part for GE refrigerators. It is designed to circulate air through the condenser coils, helping to dissipate heat and keep the refrigerator's internal components cool. This ensures efficient operation and prevents the compressor from overheating, which is essential for maintaining the refrigerator's performance and longevity.

You should replace the condenser fan motor if it becomes faulty. Causes of a bad fan motor can include electrical failures, wear and tear from regular use, or blockages that cause the motor to overheat or burn out. A malfunctioning fan motor can lead to inadequate cooling, increased energy consumption, and potential damage to other refrigerator components.

Symptoms of a bad condenser fan motor include:

The refrigerator not cooling properly
Unusual noises coming from the back of the refrigerator
The compressor running hot or cycling on and off frequently
The condenser coils feeling excessively hot

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Freezer section too warm
Noisy
Fridge too warm

Do-It-Yourself Stories from Customers like You Side by side fridge had stopped cooling in both fridge and freezer and was hot to touch in center between the two Robert P. • King , NC • August 11, 2015

I googled the issue and read several articles. Most started with cleaning the coils (which mine are on the bottom) (19yr old Kenmore 363.9557812). I had not really ever cleaned them well, vacuuming did little. I had to remove the cardboard cover off the back of the frig, and blew them clean (front to back). Once that was done, I started cleaning from the back and noticed the fan wasn't turning week (condensor fan). Blew it out too, have it a good soon with a pencil, it puffed out a bunch of... Read more

$226.48

Compare At:: $269.51
You Save:: $43.03

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Evaporator Fan Blade

4.8 (13)

By: Ge

Part Number: WR60X114

The Evaporator Fan Blade is an OEM component for GE freezers and bottom-mount refrigerator designs. Located inside the freezer compartment, this fan blade spins to circulate cold air evenly throughout the storage space.

Causes of a faulty evaporator fan blade include natural fatigue from running year-round. Freezers exposed to humid environments may experience faster corrosion.

Symptoms include:

Abnormal sounds like knocking or clunking from inside the walls
cold spots developing in certain freezer areas
Higher power bills from inefficient temperature regulation
Frost or ice patches forming on evaporator coils

This part is also compatible with some brands like Hotpoint, RCA, and Kenmore.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Broken fan blade Thomas H. • West Blocton , AL • April 21, 2014

I used a set of ring pliers to remove the old retaining ring, then spread the plastic ribs around the fan motor shaft with a small flat bladed screwdriver to ease removal of the old fan blade. I reversed the process to replace the blade, gently tapping a socket from my socket wrench set placed over the motor shaft and ribs with a small rubber mallet. I stopped when the shaft protruded about 1/8" beyond the plastic ribs of the new fan blade, then installed the new retaining clamp ring with the... Read more

$17.95

Compare At:: $24.40
You Save:: $6.45

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Ice Maker Fill Tube Grommet

4.7 (10)

By: Ge

Part Number: WR2X8474

The Ice Maker Fill Tube Grommet is an OEM part for GE refrigerators. This grommet creates a seal between the ice maker fill tube and the refrigerator, preventing leaks and ensuring that water is properly directed into the ice maker during the filling process.

Causes of a bad grommet can include regular wear and tear, damage from exposure to freezing and thawing cycles, or degradation from exposure to water and moisture.

Symptoms of a bad ice maker fill tube grommet include:

Water leaks around the ice maker fill tube area
Ice maker not producing ice properly
Visible cracks or deformation in the grommet
Water pooling inside or around the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Leaking
Ice maker not making ice

Do-It-Yourself Stories from Customers like You Had a cracked plastic ice maker inlet water tube that flooded part of kitchen floor Terry C. • Durham , NC • February 16, 2019

Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,... Read more

$32.95

Compare At:: $38.88
You Save:: $5.93

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Freezer Shelf

5.0 (16)

By: Ge

Part Number: WR71X1936

The Freezer Shelf is an OEM part for GE refrigerators. This shelf provides additional storage space within the freezer compartment, allowing you to organize and store food items more efficiently.

Causes of a bad freezer shelf can include regular wear and tear, damage from heavy or improperly placed items, or cracking from exposure to extreme temperatures.

Symptoms of a bad freezer shelf include:

Cracks or breaks in the shelf
The shelf not fitting properly into the designated slots
Difficulty in securing the shelf in place
Reduced storage capacity due to damage

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken parts on fridge Chris W. • Manassas , VA • January 11, 2017

Ordered parts yesterday, they arrived today. Parts are as advertised; priced as advertised. Thanks! Read more

$86.95

Compare At:: $103.47
You Save:: $16.52

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Defrost Thermostat

4.8 (12)

By: Ge

Part Number: WR50X55

Open - 55, close - 35

This part fixes the following symptoms

Freezer not defrosting
Freezer section too warm
Fridge too warm

Do-It-Yourself Stories from Customers like You Freezer iced up behind panel refrigerator not cooling Lisa S. • Camanche , IA • October 08, 2016

Ordered a ge thermostat part . Took everything out of freezer , unscrewed panel and took the plate out. Used a hair dryer to defrost ice. Took out old part and installed new part. Everything is working just fine!!! Used a meter to test old/bad part and indeed it was dead. Read more

$11.14

Compare At:: $30.42
You Save:: $19.28

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Ge part

Power Cord Assembly (Refrigerator)

5.0 (3)

By: Ge

Part Number: WR23X10300

This power cord assembly supplies electrical power from the wall outlet to your refrigerator. Replace a cut, frayed, or overheated cord to restore safe, reliable operation and eliminate intermittent power loss caused by a damaged cord. What it does:

Provides the electrical connection between the household outlet and the refrigerator's wiring
Helps resolve no-power or intermittent power when the cord is moved
Addresses visible damage such as cuts, cracks, fraying, or a melted/discolored plug
Mitigates arcing, sparking, or a burning odor originating from the cord or plug area

What's included:

One power cord assembly

Install notes:

Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
Pull the refrigerator forward for access; note the original cord routing and connections
Install the new cord along the same path and secure any built-in strain relief; ensure the ground connection is properly seated
Restore power and verify operation

Do-It-Yourself Stories from Customers like You Power cord needed to be replaced Jorge V. • Tucson , AZ • November 14, 2015

Spliced new and old power cord near the connections in the fridge and connected them. Didn't mess with the factory harnesses or connections inside actual fridge. Read more

$22.35

Compare At:: $26.82
You Save:: $4.47

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Ge part

Evaporator Fan Blade

5.0 (1)

By: Ge

Part Number: WR60X25785

This evaporator fan blade mounts on the fan motor and circulates cold air across the evaporator coils and throughout the compartments. Replacing a cracked, warped, or loose blade restores proper airflow and stable temperatures.

Moves air across the evaporator to distribute cooled air evenly
Helps maintain consistent refrigerator and freezer temperatures
Common symptoms include weak or no airflow, warm spots, frost buildup on the evaporator cover, and rattling/scraping noises
Replace if the blade is damaged or spins loosely on the motor shaft

What's included: 1 evaporator fan blade Install notes:

Disconnect power before servicing
Remove shelves/bins and the rear evaporator cover to access the fan
Note blade orientation and seating depth; pull the old blade straight off the motor shaft
Press the new blade on until fully seated; verify free spin and proper clearance before reassembly

Do-It-Yourself Stories from Customers like You Evaporator fan blades broke. Michael G. • Eastborough , KS • January 09, 2021

Ordered a new fan. Read more

$14.95

Compare At:: $17.94
You Save:: $2.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Ge part

Cable Clamp

By: Ge

Part Number: WR1X5278

This cable clamp secures refrigerator wiring to the cabinet, keeping harnesses organized and protected. Replacing a missing or damaged clamp helps prevent chafing and vibration noise while maintaining proper clearance from fans and other moving components.

Anchors wire harnesses in their designed routing
Helps prevent insulation wear from rubbing or vibration
Keeps wires clear of sharp edges and moving parts
Common signs it's needed: missing/broken clamp, loose or dangling wires, or new rattling/buzzing noises

What's included: 1 cable clamp Install notes:

Disconnect power before servicing
Access the clamp location and note original wire routing
Position the clamp and secure with the existing fastener; do not overtighten
Ensure wires aren't pinched and have clearance from the fan/compressor before restoring power

$7.37

Compare At:: $8.36
You Save:: $0.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Tfx24zra Parts

Appliance Light Bulb

Run Capacitor

Light Switch

Defrost Timer

Lower Door Hinge Kit

Light Socket

Cam Riser

Drawer Slide Assembly

Condenser Fan Motor

Evaporator Fan Blade

Ice Maker Fill Tube Grommet

Freezer Shelf

Defrost Thermostat

Power Cord Assembly (Refrigerator)

Evaporator Fan Blade

Cable Clamp