Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces dim, flickering, or burnt-out bulbs in refrigerators, ovens, and microwaves. Restores interior lighting for visibility. Verify fit with model.
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more
Oven won't heat or takes forever to light? This igniter draws current to ignite the gas burner. DIY-friendly repair, typically 20-30 minutes with basic tools.
I watched a video by AppliancePartPros, and it showed the exact problem that I was having as well as what part that I would need for the repair. So I ordered the part which was and oven igniter, that also turned out to be the exact replacement for my old igniter.The part came in the mail in a about 3 days and I was able to install it myself in about 20 minutes give or take, with simple hand tools, then I did a quick test and everything worked fine. THANKS APPLIANCE PARTS PROS FOR ALL OF YOUR... Read more
Fix oven temperature issues, error codes F3E2/F3E0, or uneven cooking. This oven sensor is a straightforward 10-minute DIY repair with our video guide.
When bake was set, the stove would function normally, it would show pre-heating then get up to temperature and beep twice like normal when it reached the set temperature. Shortly after it would start beeping and scroll “ fault detected, press start to try again” across the display. Pressing start did not resolve, the message would continue to post and the pizza inside was burnt. We noticed the broil element was glowing. This model stove does use the broil element for backing but it... Read more
Mice nesting in your oven? Replace damaged insulation wrap to restore heat retention and cooking performance. Wraps around oven cavity. DIY-friendly.
Took the stove apart*, saw where the mouse had made a nest. It was kind of like a hotel room after a rock star had used it. It was nasty, is what I'm saying. I removed the insulation, which immediately went into a garbage bag and was placed outside, whereupon I took off and nuked the site from orbit. It was the only way to be sure (actually it was disposed of in the proper manner, no nukes were detonated in the course of this repair). Anyway, I ordered the insulation from this site, which was... Read more
White acrylic spray paint for appliance exterior touch-ups. Restores worn, chipped, or scratched surfaces on refrigerators, ranges, and more. 13 oz can.
Replaced It With New One Read more
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Touch up paint Read more
Fix an oven that won't heat or ignite even when the igniter glows. This gas safety valve controls gas flow to your range burner. DIY repair in 20 minutes.
Went on Internet to see what the problem was, it gave me thing to look for , after checking the things that it showed I came up that it was the gas valve I called around town trying to find it and get prices and no one had it and the cost was high so I went back to the Internet and ordered it thu Appliance PartsPros for $50.00 less than what I could get for in town and I got it in time for my wife to cook Thanksgiving super. Read more
Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.
Installed it according to video watched. Read more
30-inch towel-bar style door handle for range ovens. Replace a bent, cracked, or missing handle to restore safe door operation and clean appearance.
The plastic piece on the handle where the screw goes in to hold glass door up had broke. I ordered new handle, the retainer pieces that go over the plastic pieces to lock it all in and screws that were suggested. The screws were the wrong ones. They were way too small. I already had one screw and thankfully only had to buy 1 new one because the screw was $40 and shipping’s $10 for it AND it’s on back order right now. The old retainer ring that goes over plastic piece was a nightmare to remove... Read more
Fix a burner that won't light or an igniter that's fallen out of position. This clip secures the surface igniter in place. Simple 5-minute repair.
Replaced ignitor clip. Read more
Replacement handle for range oven or broiler drawer doors. Installs on the front panel for comfortable grip. Replace if cracked, broken, or missing.
Simply Replaced it with a new one I order on line . I just had to screw the new handle on. Read more
Fix burners that click but won't light with this gas range surface burner igniter. DIY-friendly repair takes about 10 minutes with basic tools.
First I watched the repair video, and then was successful in changing out two of the Ignitor's on the surface Burners, it worked great ! Read more
Black burner cap that sits atop the gas burner base on your range. Replace if cracked, chipped, discolored, or missing to restore cooktop appearance.
I ordered the burner cap set. Read more
Press-fit retaining fastener that secures range door handles and components to studs. Replace when original nut is missing, bent, or no longer grips.
Replacement mounting screw for securing range panels, brackets, and internal components. Replace missing, stripped, or rusted screws to restore fit.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Controls gas flow to burners and oven by stabilizing manifold pressure. Replace if cracked, damaged, or leaking to restore proper gas regulation.
Found that the gas line did not have a dirt trap put in it. So I put one in. I think the regulator valve was not closing off. To be safe, I replaced the gas safety valve and regulator. Read more