Dcv660eh0bb Parts

The Lint Filter Assembly is an OEM part for GE dryers. This part captures lint and debris from the air flowing through the dryer, preventing these particles from clogging the vent and ensuring efficient airflow.  

Causes of a bad lint filter assembly can include physical damage such as cracks or breaks, wear and tear from regular use, or clogging from excessive lint buildup that can't be cleaned effectively.

Symptoms of a bad lint filter assembly include:

• Lint buildup on clothes after drying
• Longer drying times
• The dryer overheating
• Visible damage or warping of the filter assembly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Idler Bracket and Bearing Assembly is an OEM part for GE dryers. This assembly supports and guides the dryer drum belt, ensuring it remains tensioned and aligned for proper drum rotation during the drying cycle. The idler bracket and bearing play a crucial role in maintaining the efficiency and functionality of the dryer.

Over time, the idler bracket and bearing can wear out or become damaged. Causes of a bad idler bracket and bearing assembly can include frequent use, physical damage, or normal wear and tear of the moving parts.

Symptoms of a bad Idler Bracket and Bearing Assembly include:

• Squeaking or grinding noises during the drying cycle
• The dryer drum not turning smoothly or at all
• Increased drying times or incomplete drying

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Trap Duct Assembly is an OEM part for GE dryers. This part directs the airflow from the dryer drum to the exhaust vent. This assembly ensures efficient drying by guiding hot air out of the dryer while collecting lint and debris in the trap, preventing it from clogging the venting system.

Causes of a bad trap duct assembly can include lint buildup over time, physical damage due to heavy usage, or obstruction from foreign objects. 

Symptoms of a bad Trap Duct Assembly include:

• Reduced drying efficiency or longer drying times
• Excessive lint buildup around the dryer
• Overheating of the dryer
• Unusual noises during the drying cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement part is a high-limit thermostat, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This high-limit thermostat is typically found in dryers and controls the heat inside the drying tub. This is especially important as different dryer settings require different amounts of heat. If the high limit thermostat works properly, the temperature inside the tub should reach the correct amount during each drying cycle with no issues. A new high-limit thermostat might be needed if the user notices that the dryer is unable to reach the appropriate level of heat for a certain drying cycle. This is also true if the dryer is becoming too hot when the heat is supposed to be set to low. Make sure the dryer is cooled down prior to replacing this part as the areas in the back of the dryer can become very hot during use. Be sure to reference the specific user manual for more instructions on how to replace the thermostat. This thermostat is sold individually and is a genuine OEM part. The thermostat is sourced directly from the manufacturer.

The Drive Belt is an OEM part for GE dryers. This belt wraps around the dryer drum, the tension pulley, and the motor pulley, enabling the drum to rotate during the drying cycle. It ensures the effective tumbling of clothes for efficient drying.

Causes of a bad drive belt can include normal wear and tear over time, excessive friction, or overloading the dryer, which can lead to the belt stretching, fraying, or breaking.

Symptoms of a bad drive belt include:

• The dryer drum not spinning
• A squealing or thumping noise during operation
• Clothes taking longer to dry
• The dryer stopping mid-cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dryer Lint Filter is an OEM replacement part for GE dryers. This lint filter is designed to trap lint and debris from clothing during the drying cycle, preventing it from entering the dryer's exhaust system. By capturing lint, the filter helps maintain airflow efficiency, ensuring optimal drying performance and reducing the risk of fire hazards.

Over time, lint filters can become worn, torn, or clogged due to regular use. A damaged or ineffective filter may allow lint to bypass the trap, potentially clogging the vent system and impacting dryer efficiency.

Symptoms of a bad lint filter include:

• Visible tears or holes in the filter mesh
• Excessive lint buildup in the dryer drum or vent
• Longer drying times or reduced drying efficiency
• Difficulty fitting the filter securely into its slot

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This cleaning felt mounts on the dryer's front shroud. It lightly contacts the rotating drum to wipe away lint and residue, helping keep the drum edge clean and supporting consistent airflow to the lint filter.

• Provides a soft wiper against the drum rim to reduce lint and residue buildup
• Helps maintain smooth drum rotation and a clean front duct area
• Wear signs include frayed or missing felt, lint trails on fabrics, or light squeaks at the front
• Visual inspection is recommended if lint accumulates inside the drum after cycles

• Disconnect power; for gas dryers, also shut off gas supply
• Access the front panel/shroud and note the original felt's orientation before removal
• Clean the mounting surface; install the new felt in the same position (some models use clips or adhesive)
• Hand-rotate the drum to ensure even, light contact before reassembly and testing

Hi-limit thermostat. L210.

This outlet backup thermostat for dryers mounts on the exhaust duct and provides secondary over-temperature protection. It shuts the heater off if exhaust air gets too hot, helping maintain safe, consistent drying.

• Serves as a secondary temperature limit on the exhaust/outlet duct
• Opens the heater circuit if exhaust temperature rises too high
• Failure symptoms include no heat, intermittent heat, overheating, or short-cycling
• Replace if it fails continuity testing or shows heat damage

• Disconnect power and shut off gas supply (for gas models) before servicing
• Access the outlet/exhaust duct per your model; transfer wires one at a time and secure the thermostat to the duct
• Replace any heat-damaged connectors and correct restricted airflow (clean lint filter and vent) before testing
• Match the color/rating to your original; this is the orange variant

This replacement blower wheel for a dryer mounts to the drive motor and pulls air through the drum, lint filter, and exhaust, restoring proper airflow so loads dry efficiently and the appliance runs as intended. What it does:

• Spins with the motor to move air through the drum, lint screen, and exhaust duct
• Maintains airflow needed for even drying and temperature control
• Wear, cracks, or a stripped hub can cause long dry times and weak vent airflow
• Damage or imbalance may produce rattling, scraping, or vibration noises from the blower area

• 1 blower wheel

• Disconnect power; turn off gas supply for gas models before servicing
• Access the blower housing and remove the old wheel from the motor shaft per your model's design
• Clean lint and debris from the blower housing and exhaust duct while open
• Seat the new wheel fully and verify free rotation without rubbing before reassembly

Mounted inside the dryer drum, this replacement baffle lifts and separates laundry as the drum turns to improve airflow and even drying. Replacing a cracked or missing baffle restores quiet, effective tumbling and helps prevent fabric damage. What it does:

• Lifts and tumbles clothes to promote even drying and airflow
• Helps prevent clumping or items sticking to the drum
• Common failure signs: thumping noise, poor tumbling, long dry times, or a loose/missing baffle
• Restores balanced operation inside the drum when replaced

• 1 drum baffle

• Disconnect power; allow the dryer to cool before servicing
• Access the drum per your model (remove top/front panel as needed)
• Align the new baffle with the drum's mounting holes and secure with existing hardware; tighten all fasteners
• Hand-rotate the drum to verify clearance before reassembly and testing

The Bearing Assembly is an OEM component designed for GE dryers. This assembly contains the dryer bearing and facilitates smooth drum rotation during drying cycles.   

Symptoms of a bad bearing assembly can include wear and tear over time, exposure to vibrations, or rust/corrosion damage.

Causes of a bad bearing assembly include:

• Noisy operation or grinding sounds 
• The drum not spinning or spinning unevenly
• Excessive machine vibrations 
• Premature wear of other components

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryer models.

This replacement screw secures dryer panels and assemblies, helping prevent vibration and keeping components properly aligned. Use it to replace missing or stripped hardware and restore a solid, factory-tight fit during reassembly.

• Secures panels, brackets, and internal assemblies in the dryer cabinet
• Replaces lost, damaged, or stripped factory screw
• Helps reduce vibration and rattling caused by loose hardware
• Supports proper alignment of parts and a tight fit
• Symptoms can include loose or shifting panels, rattling noises, or gaps

• Disconnect power before servicing; for gas dryers, also shut off the gas supply if moving the unit.
• Match screw length and location to the original during reassembly.
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
• Use the correct driver for your screw head style as used on your model.

Liquid propane to natural gas

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

This gas valve regulates and safely delivers fuel to your dryer's burner. When operating correctly, it opens for ignition and closes when heat is satisfied, providing consistent, reliable heating for effective drying.

• Opens to allow gas into the burner when the ignition system calls for heat
• Closes to stop gas flow during cycling or if ignition fails
• Possible symptoms: dryer runs but no heat; igniter glows yet no flame; intermittent heat or long dry times
• Helps restore proper burner ignition and stable flame

• Disconnect power and shut off the gas supply before servicing
• Work in a well-ventilated area; check all connections for leaks with a non-corrosive leak-detection solution after installation
• Transfer any brackets, fittings, or orifices from the original valve as required; secure connections
• Confirm gas type (natural/LP) and regulator/orifice settings per the service manual before restoring service