Dvm3160 Parts

The Microwave Exhaust Adapter is an OEM replacement part for GE built-in microwave ovens. Located at the top or rear of the microwave, the exhaust adapter connects the ventilation system that removes steam, smoke, and odors produced during cooking. 

Symptoms of a bad exhaust adapter can include: 

• Moisture or steam films accumulating on interior surfaces   
• Strange vibration noises coming from the ventilation connection
• Reduced cooking efficiency as hot air lingers inside the cavity
• Visible cracks, separations, or blockages in the adapter itself

Causes of a bad exhaust adapter microwave include natural wear from repeated heating cycles, cracks or damage from installation/removal, or blockages from grease/ residue accumulation over time.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore built-in microwave models. 

The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.

Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.

Symptoms of a bad Mounting Plate include:

• Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.

• Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.

• Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Air Filter is an OEM part for GE microwaves. This component is essential for trapping grease, smoke, and odors during cooking, maintaining a clean and safe kitchen environment. It is typically located above the cooking surface or within the microwave's ventilation system. The filter measures approximately 6.5 inches deep by 13.5 inches wide

Causes of a bad air filter can include clogging from grease and food particles, physical damage, or general wear over time. A compromised air filter can reduce the efficiency of the microwave's ventilation, leading to poor air quality and potential buildup of contaminants.

Symptoms of a bad air filter include:

• Reduced ventilation efficiency
• Increased smoke or odors during cooking
• Visible grease buildup on the filter
• The filter appearing damaged or excessively dirty

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Microwave Grease Filter is an OEM part for GE microwaves. As an essential safety component, it traps smoke, grease, and residue from foods prepared using the microwave's convection cooking functions. Proper filtration prevents dangerous buildup on interior surfaces.

Symptoms of a bad microwave grease filter include:

• Excess grease or burnt residue inside the microwave cavity
• Unpleasant odors emitted from the ventilation system
• Reduced or no ability to filter combustion byproducts

Causes can be damage from cleaning chemicals or excessive heat warping the filter material over time. Regular cleaning helps filters maintain effectiveness.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Charcoal Filter is an OEM replacement part for GE microwaves. Located inside the ventilation system above the cavity, this porous filter works to remove smoke, fumes, and odors extracted during the venting process.  

Causes of filter failure include material exhaustion over several years of use. Grease and carbon buildup inhibit effective odor absorption.

Symptoms include:

• Strong cooking smells recirculating in the kitchen instead of outside
• Reduced ventilation power due to blocked airflow paths
• Potential damage to other internal components from restricted venting

This GE OEM replacement part is also compatible with select GE, Hotpoint, and select Kenmore models.

The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards.

Symptoms of a bad Lower Lever Switch include:

• The microwave not starting, indicating the door isn't recognized as closed
• The appliance operating with the door open, a clear safety hazard
• Unusual sounds or issues when attempting to start the microwave
• The need to apply extra pressure to keep the door closed

Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This damper is the exhaust vent flap for a microwave. It opens to let air flow out while venting and closes when the fan is off to help prevent drafts, moisture, and debris from entering the unit.

• Directs airflow from the microwave to the outside or recirculation duct
• Helps prevent backflow of air and odors when the fan is off
• A common cause of rattling noises, poor venting, or backdrafts during operation
• Replaces a warped, stuck, or missing vent flap to restore proper ventilation

• Disconnect power before servicing
• Access is typically from the top or rear once the unit is removed or tilted forward
• Note airflow direction and hinge orientation before removal
• Ensure the flap moves freely after installation and proper airflow

The GE door handle is an OEM replacement part for GE microwaves. This white handle enables safe and convenient access to the interior cooking compartment.

Causes of a handle becoming defective can be normal wear and tear over extended and repeated use. Prolonged exposure to heat or impacts may also damage the structural integrity of the handle.

Symptoms of a bad handle may include:

• Looseness, wobbling
• Detachment that compromises secure closure of the microwave door

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Diode Cable Assembly is an OEM part for GE microwaves. This part converts AC power to DC power, which is crucial for the microwave's operation.  

Causes of a bad diode cable assembly can include electrical surges, overheating, or general wear and tear.  

Symptoms of a bad diode cable assembly include:

• Microwave not heating food
• Unusual noises during operation
• Burning smell or visible damage to the cable
• Microwave shutting off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Charcoal Filter is an OEM replacement part for GE microwaves. It helps control odors within the microwave by filtering the air during the cooking process. As microwaves heat up food, vapors, and smells can get trapped inside. The charcoal filter works to absorb and neutralize these odors before they are released back into the air.

Causes of a bad filter include exceeding the recommended replacement schedule or exposure to extremely pungent cooked foods on a regular basis.

Symptoms of a charcoal filter that needs replacing include:

• Noticeable odors emitted from the microwave when in use or just after cooking
• Food taking on smells from previous meals
• The filter material appears exhausted or completely dark/black

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Cooking Tray is an OEM part for GE microwaves. This glass tray rotates to ensure even cooking and heating of food. It is designed to fit perfectly in the microwave, providing a stable platform for cookware and dishes.

Over time, the cooking tray can become damaged or worn out due to regular use, accidental drops, or exposure to extreme heat. Replacing a damaged cooking tray is essential to maintaining the microwave’s functionality and ensuring food is heated evenly.

Symptoms of a bad cooking tray include:

• Cracks or chips in the glass
• Difficulty in rotating or wobbling during operation
• Uneven cooking or heating of food
• The tray not fitting properly in the microwave

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Capacitor is an OEM part for GE microwaves. This component stores and releases electrical energy to help power the microwave's high-voltage circuits, essential for the proper functioning of the appliance.

Over time, capacitors can fail due to electrical surges, overheating, or degradation of the internal components. When a capacitor goes bad, it can affect the microwave's ability to generate heat and operate efficiently.

Symptoms of a bad Capacitor include:

• The microwave not heating food
• Unusual humming or buzzing noises
• The microwave shutting down or not starting

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This thermostat is a temperature-sensing safety switch used in microwave ovens. It monitors heat and opens the circuit during an over-temperature condition to protect internal components and help prevent damage. What it does:

• Monitors temperature at a specific location inside the microwave
• Interrupts power if overheating is detected to protect components
• Helps safeguard the magnetron and wiring from thermal damage
• Presents as: shuts off mid-cycle, won't restart until cooled, no power, or runs but doesn't heat

• 1 thermostat

• Disconnect power before service; microwaves contain a high-voltage capacitor that can hold a dangerous charge—discharge it properly
• Note wire locations and transfer connections one at a time to the new thermostat
• Mount in the original location with firm, flush contact to the surface for accurate sensing
• Reinstall all covers and safety shields before restoring power and testing

The Turntable Ring Assembly is an OEM part compatible with GE microwaves. It consists of the circular ring component that houses the turntable mechanism. This assembly is crucial for rotating food evenly during the microwave cooking cycle.

Causes of a bad turntable ring assembly can include wear and tear from years of use, damage from spilled or baked-on food remnants, or cracks/breaks from accidental impact. 

Symptoms of a bad assembly include:

• The turntable no longer spins or rotates unevenly
• Excessive noise or grinding sounds coming from beneath the turntable 
• Cracks or breaks in the plastic ring housing

This GE replacement part will restore optimized cooking performance by enabling even heat distribution. It is designed to directly replace the original component. This OEM part is also compatible with some Kenmore microwaves. Maintaining your microwave includes periodic replacement of consumable parts like the turntable ring.
 

This is a turntable motor intended for use with microwave ovens. A turntable motor is required to rotate the turntable so that food is heated evenly. With time, because of misuse, or as a result of accidental damage, the turntable motor may malfunction or fail. To continue using the appliance efficiently, the turntable motor must be replaced.The primary indication that there is something wrong with the turntable motor is a tray that doesn't spin. When replacing the turntable motor, it is essential to disconnect the machine from the power source. Wear gloves for safety. The part can be replaced easily by removing screws from the back and side of the microwave, which allows the panel to swing open. Take the wires of the old motor and reconnect them to the new one.This turntable motor is an authentic OEM replacement part. It is sold as an individual unit. The turntable motor is made of high-quality, durable materials. The component comes sourced directly from the manufacturer. The replacement part can be installed in several models of microwaves. It is compatible with appliances produced by General Electric, RCA, and Hotpoint brand appliances.

The Handle Asm Es is an OEM part for GE microwaves. It contains an outer door handle that allows for easy opening and closing of the microwave door. 

Symptoms of a bad handle assembly can include:

• Difficulty opening or closing the microwave door 
• Damage or cracks visible on the handle itself
• The handle is loose or detaching from the door
• The door not latching securely during the operation

Causes of a bad handle assembly include broken or cracked plastic, wear and tear over time, or issues with the internal latching mechanism. 

This OEM replacement part is also compatible with Hotpoint and some Kenmore microwave models.