Ffbd2412552a Parts

Upper dishwasher washarm delivery tube gasket.

The Front O-Ring is an OEM part for Frigidaire dishwashers. This component is essential for maintaining a watertight seal in the front areas of the dishwasher's internal systems, such as around the pump or valve connections. It prevents water leaks and ensures the efficient operation of the dishwasher. The rear O-ring is part number AP2109101

Causes of a bad front O-ring can include regular wear and tear, exposure to high temperatures, and chemical degradation from detergents and rinse aids. Over time, the O-ring may dry out, crack, or become deformed, leading to leaks and decreased performance.

Symptoms of a bad front O-ring include:

• Water leaking from the front of the dishwasher
• Puddles forming under the appliance
• Reduced cleaning performance due to water pressure issues
• Noticeable wear, cracks, or deformation on the O-ring

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Dishrack Rail is an OEM replacement part for Frigidaire dishwashers. Made of durable steel, the rails withstand years of constant extension, retraction, and weight loads.

Causes of bad rails can include cracks or breaks developing from repeated sliding motions over decades of use. Mineral buildup from hard water may also corrode and weaken internal rail structures.

Symptoms of a bad Upper Dishrack Rail include:

• Rack that will not stay locked securely in position
• Tines that collapse or slip out of adjustment
• Rust accumulating on rail surfaces
• Wheels, bearings or rollers sticking during operation

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore ranges.

The Rear O-Ring is an OEM part for Frigidaire dishwashers. This small but crucial component ensures a watertight seal within the dishwasher's internal systems, preventing leaks by sealing connections between various parts, such as the pump or valve assemblies. The front O-ring is part number AP2109102

Causes of a bad rear O-ring can include regular wear and tear, drying out or cracking due to age, and damage from chemical exposure or improper installation. A compromised O-ring can lead to water leaks and reduced efficiency of the dishwasher.

Symptoms of a bad rear O-ring include:

• Water leaking from the dishwasher
• Puddles forming underneath the appliance
• Reduced washing performance due to water pressure loss
• Noticeable wear, cracks, or deformation on the O-ring

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Kickplate Mounting Screw is an OEM part for Frigidaire dishwashers. This screw secures the kickplate, or toe panel, at the bottom of the dishwasher, keeping it in place and ensuring that it effectively covers and protects the lower components of the appliance. Proper mounting of the kickplate helps maintain the dishwasher's overall appearance and prevents debris from entering the lower section.

Common causes of a bad kickplate mounting screw include frequent removal and reinstallation, corrosion, or accidental damage.

Symptoms of a bad kickplate mounting screw include:

• The kickplate being loose or falling off
• Difficulty in securing the kickplate properly
• Visible rust or wear on the screw

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Thermostat is an OEM part for Frigidaire dishwashers. It plays a critical role in regulating the temperature of the dishwasher during the wash and rinse cycles, ensuring optimal cleaning and drying performance.

Causes of a bad thermostat can include electrical malfunctions, wear and tear over time, or damage due to power surges or water exposure. A faulty thermostat can disrupt the normal operation of the dishwasher, leading to inefficient washing and potential damage to dishes.

Symptoms of a bad thermostat include:

• Dishes not drying properly
• Dishwasher not heating water correctly
• Error codes related to temperature issues
• Dishwasher stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Roller Assembly is an OEM part for Frigidaire dishwashers. This part ensures that the dishwasher racks glide smoothly in and out, providing easy access to dishes and utensils during loading and unloading.  

Causes of a bad roller assembly can include regular wear and tear from frequent use, damage from overloading the racks, or exposure to harsh dishwasher detergents and high temperatures.

Symptoms of a bad roller assembly include:

• Difficulty sliding the racks in and out
• The rack falling off the track
• Unusual noises when moving the racks
• Visible wear, cracks, or missing rollers

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Spring Linkage is an OEM part for Frigidaire dishwashers. This part connects the door springs to the dishwasher door, ensuring smooth and balanced opening and closing of the door.

Causes of a bad door spring linkage can include wear and tear from frequent use, physical damage from impacts or mishandling, or deterioration over time.

Symptoms of a bad door spring linkage include:

• The dishwasher door not staying open or closed
• Difficulty in opening or closing the door
• A loose or sagging door
• Unusual noises when operating the door

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This float detects and monitors water levels in the appliance's sump/drain area to help prevent overfilling and water pooling. Replacing a damaged or stuck float restores proper water sensing and reduces leak risk. What it does:

• Senses water level in the drain pan or sump so the appliance can stop or redirect water flow
• Helps prevent water from overflowing or pooling under the appliance
• Can stop false fill/overfill conditions caused by a stuck or broken float
• Fault symptoms include water pooling, continuous or unexplained filling, or failure to drain properly

• Always unplug the appliance before accessing internal panels or service areas
• Remove the required access panels or trim to reach the sump/drain area; follow the model's service manual
• Handle the float and any clips or wiring carefully to avoid damage; reconnect any electrical connectors securely
• After installation, restore power and run a manual fill/drain test to verify proper operation

The Sump Cover and Filter is an OEM part for Frigidaire dishwashers. Located inside the bottom of the tub, it seals off and protects the drainage sump where debris collects after each wash cycle. The attached mesh filter screens out particles that could otherwise clog drain lines.

Causes can involve mineral buildup that blocks the filter mesh over time, cracks in the plastic housing exposing the sump, or a missing or damaged filter that fails to trap solids.

Symptoms of a bad sump cover and filter include:

• Standing water inside the bottom of the dishwasher tub
• Reduced drainage or water removal after cycles complete
• Floating debris trapped near the drain pump area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

This replacement bracket secures a component to the appliance frame, keeping it aligned and stable during operation. Install it to replace a bent, cracked, or missing bracket and restore a solid, rattle-free mount.

• Provides a rigid mounting point to hold the specified part in place
• Helps maintain alignment to reduce vibration, rubbing, or noise
• Replaces damaged or corroded hardware to restore a secure fit
• Common symptoms: loose or sagging component, unusual vibration/noise, or part shifting out of position

• Disconnect power before servicing; shut off water supply if working near water lines
• Note original orientation and fastener locations; take a reference photo
• Transfer and reuse existing screws/clips as needed; tighten fasteners evenly without over-torquing
• Verify alignment and test operation before final reassembly

This strike is the receiver the door latch engages with to keep the door securely closed. A properly aligned strike helps the appliance recognize a closed door so cycles can start and run without interruption. What it does

• Provides the catch point for the door latch to secure the door during operation
• Helps align the latch for smooth, consistent engagement
• Ensures the door-closed switch can be activated so the unit can start
• Worn, bent, or broken strikes can cause the door not to latch, pop open, or trigger door-open errors

• 1 strike

• Disconnect power before servicing; follow manufacturer safety procedures
• Note the strike's orientation and any shims/spacers before removal
• Reuse existing mounting hardware unless your model specifies otherwise
• After installation, check alignment and the latch engages smoothly without force

Set of 8 screws and washers.

The Control Board is an OEM part for Frigidaire dishwashers. It governs all cycle programming, temperature control and wash pump/motor operation.

Causes of malfunction can include damage from moisture ingress degrading electronic pathways over time. Repeated thermal stresses also cause parts degradation.

Symptoms of a faulty control board include:

• Inoperable cycle buttons and non-functional digital display
• Failure to progress through cleaning stages properly
• Abnormal noises from circulator pumps or spray arms
• Constant buzzing or activation of unused heating coils

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement bracket is used in Frigidaire-made dishwashers to secure an associated component or panel. Replacing a broken or missing bracket restores a tight fit, alignment, and stability so parts don't loosen, rattle, or shift during cycles. What it does:

• Provides a rigid mounting point for the connected part or panel
• Maintains proper alignment and stability during operation
• Helps reduce rattling or vibration from a loose component
• Replaces a broken, bent, rusted, or missing bracket

• 1 bracket

• Disconnect power and turn off the water supply before servicing
• Access and mounting location vary by model; refer to your service or installation manual
• Wear cut-resistant gloves; bracket edges may be sharp
• Save and reuse the original screws/fasteners; install in the same orientation and tighten securely

The Console Assembly is an essential OEM part for Frigidaire dishwashers. Housing control interfaces, it direct wash cycles and options selected by the user.

Causes of failure could involve liquid residue seeping into electronic components over many years. Physical stresses from repeated button pushes may also crack lightweight plastic materials over time. 

Symptoms of a faulty console assembly include:

• Knobs or buttons stuck or unresponsive  
• Lights or displays failing to illuminate properly
• Physical cracks or splits in the surface panel

This authentic OEM replacement is compatible with select Electrolux and Kenmore models.