Gdt655sgjww Parts

The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.

Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.

Symptoms of a bad door latch strike include:

• The dishwasher door not latching securely
• The dishwasher not starting or stopping mid-cycle
• Leaks around the door during operation
• Difficulty in closing the door properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Vent Seal is an OEM part for GE dishwashers. Located within the front dishwasher door, it functions to control moist air circulation and maintain humidity levels inside the wash chamber.

Causes of a bad door vent seal can include cracking of the flexible seal material. Mineral or soap deposits may also compromise sealing integrity.

Symptoms of a bad vent seal include:

• Excess condensation buildup within the door interior
• Water leaks detected around door ventilation openings
• Drying and sanitization issues related to inconsistent humidity levels

This GE OEM replacement part is also compatible with Hotpoint, RCA, and select Kenmore-branded dishwashers.

The Folding Tine Row Clip is an OEM part for GE dishwashers. It is located on the side of the dishwasher's lower rack and holds the folding tine row securely in position. It ensures that the folding tines, which can be adjusted to accommodate different dish sizes, remain stable during the wash cycle.

Causes of a faulty or damaged folding tine row clip can include regular use, wear and tear, or breakage. These factors can result in issues such as the folding tine row becoming loose or unstable, difficulty in adjusting the tines, or the tines not staying in the desired position.

Symptoms of a bad folding tine row clip may include:

• The folding tine row becoming loose or falling out of place
• Difficulty in adjusting the tines or keeping them in position
• Unstable or wobbly tines during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Mounting Bracket is an OEM replacement part for GE dishwashers. This bracket secures the dishwasher in place underneath the kitchen countertop. 

Causes of failure relate to stresses of a heavy dishwasher pushing down against the countertop edges combined with constant machine vibration over extended service life. 

Symptoms of a cracked or damaged mounting bracket include:

• Excessive movement play or sloshing of the installed dishwasher  
• Strange noises when the dishwasher is running
• Difficulty removing or installing the dishwasher   
• Visible bending of bracket components out of intended position

This genuine GE bracket is compatible with Hotpoint and RCA dishwashers.

The Folding Tine Row is an OEM part for GE dishwashers. Located on the bottom dish rack, it functions to fold down during wash cycles for improved water coverage beneath flatware and smaller items.

Causes of a bad folding tine row can include broken or cracked tines from years of repeated folding motions. Mineral accumulation on hinge points may also affect smooth operation.

Symptoms of a bad Folding Tine Row include:

• Inability to fold down or remain in the folded-down position
• Improper water coverage for small plates and utensils on the bottom rack
• Items not getting thoroughly washed beneath the tine area
• Loose fasteners or components that create noise during cycling

This GE OEM replacement part is also compatible with Hotpoint, RCA, and select Kenmore dishwashers.

The Folding Tine Row is an OEM replacement part for GE dishwashers. Located along the lower rack, it contains movable plastic tines that flex to accommodate varying dish sizes and configurations. Proper functioning tines are essential for optimizing wash coverage and cleaning results. 

Causes of a bad folding tine row include cracked or broken plastic from years of repeated movement. Mineral buildup may cause tines to become rigid or stuck over time as well.

Symptoms include: 

• Inability to fit larger pots, pans, or casserole dishes  
• Items not getting fully washed due to restricted spray access
• Food particles or residue left behind in hard-to-reach areas  
• Warped or misaligned tines that snag during loading/unloading

Compatible models include Hotpoint, RCA, and some Kenmore dishwashers. 

The Sump Gasket is an OEM part for GE dishwashers. It forms a watertight seal around the sump area, preventing leaks and ensuring proper water circulation within the dishwasher.

Causes of a bad sump gasket include exposure to high temperatures, general wear and tear over time, and damage from cleaning chemicals.

Symptoms of a bad sump gasket include:

• Water leaking from the bottom of the dishwasher
• Poor cleaning performance due to improper water circulation
• Visible cracks or deterioration in the gasket material
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Mid Conduit Blaster is the mid-level water outlet in your dishwasher's wash system. It directs pressurized water through the middle conduit, helping deliver consistent spray to the middle rack for reliable cleaning performance.

• Directs wash water into the mid-level conduit and spray system
• Helps maintain proper pressure and spray coverage for middle-rack cleaning
• Damage or clogging can lead to weak spray, poor cleaning on the middle/upper racks, or unusual noise
• Replace if cracked, missing, or leaking at the conduit connection

• Disconnect power and shut off the water supply before servicing
• Pull out racks as needed to access the mid-level conduit
• Release locking tabs or fastener, remove the old outlet, and seat the new one fully in the correct orientation
• Restore power and water, then run a short cycle to check spray action and for leaks

The Fill Funnel Service Kit is an OEM replacement part for GE dishwashers. It contains the funnel assembly and seal/gasket used for the water inlet. Reliable filling is important for effective cleaning.

Causes can be cracks, tears, or deformities developing in seals over extended use periods. Mineral buildup may also compromise sealing surfaces.

Symptoms of a bad service kit include:

• Water leaks from around the inlet area
• Inconsistent water filling during dishwasher cycles
• Damp residue or puddles below inlet assembly

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Drain Tube is an OEM part for GE dishwashers. This tube is responsible for carrying wastewater from the dishwasher to the household drain, ensuring efficient and effective removal of dirty water during and after the wash cycle. The drain tube helps maintain the dishwasher's performance by preventing water from pooling inside the appliance.

Over time, drain tubes can become clogged, cracked, or worn out due to regular use or debris buildup. Common causes of a bad drain tube include blockages from food particles, mineral deposits, wear and tear from frequent use, or damage from improper installation or handling.

Symptoms of a bad drain tube include:

• Water not draining from the dishwasher
• Leaks around the dishwasher area
• Unpleasant odors due to standing water
• Visible cracks, splits, or kinks in the tube

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Flood Switch is an OEM part for GE dishwashers. This critical component detects and prevents potential overflows by monitoring water levels within the dishwasher. When excessive water is detected, the flood switch signals the dishwasher to shut off water flow, preventing leaks and potential water damage.

Causes of a bad flood switch can include electrical failures, physical damage from debris, or wear and tear from repeated use. If the flood switch malfunctions, it may not properly detect water levels, leading to possible overflows or improper operation of the dishwasher.

Symptoms of a bad flood switch include:

• The dishwasher stopping mid-cycle
• Water not filling or overfilling the dishwasher
• Error codes related to water level issues
• Leaks around the dishwasher

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Electronic Control Board Jumper Wire is an OEM replacement part for GE dishwashers.

Causes of a faulty jumper wire include fracturing of internal interconnects from normal circuit board flexing during door closes. Overly aggressive cleaning solvents may also damage wire insulation over time.

Symptoms of a problematic jumper wire include:

• Intermittent or unreliable operation of wash cycle features
• Unresponsive touch controls and inability to start cycles
• Error codes displayed and failure to detect cycle outputs

This is a genuine OEM part that works for some models of GE, and Hotpoint models.

The Door Vent Cover is an OEM part for GE dishwashers. This cover is designed to fit over the vent on the dishwasher door, allowing steam to escape while keeping the interior components protected from moisture and debris.

Common causes of a bad vent cover include physical damage from impact, warping due to prolonged exposure to high temperatures, and buildup of residues that can block the vent.

Symptoms of a bad door vent cover include:

• Visible cracks or breaks in the cover
•  Steam escaping from unexpected areas of the door
• Increased moisture inside the dishwasher
• Loose or poorly fitting cover

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ultra fine filter kit is an OEM replacement part for GE dishwashers. As part of the rinse cycle, this filter helps further remove food debris from dishes before the dry cycle begins, allowing for sparkling clean results.

The ultra-fine filter is designed with a close-nit mesh that is able to capture microscopic food particles and sediment. This prevents debris from re-depositing onto dishes or interfering with proper drying.

Symptoms of a bad ultra-fine filter include:

• Food particles or sediment left behind on dishes after the cycle completes
• Cloudiness or film remaining on glassware that is difficult to wipe away
• The shortened lifespan of other filter components due to excessive debris built-up

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Restore a clean, finished look at your dishwasher's tub opening with this tub trims kit. Replacing worn or missing side trims helps the door open and close smoothly and prevents snagging or rubbing along the tub edges.

• Finishes and protects the left and right edges of the tub opening
• Helps guide the door and maintain proper clearance
• Replace if trims are cracked, warped, missing, loose, or discolored
• Common signs include visible gaps, trim falling off, or door scraping/binding

• Disconnect power and turn off the water supply before servicing
• Open the door, remove old trims, and clean the mounting surfaces
• Align each new trim to the correct side and press/seat fully for a secure fit
• Open and close the door to confirm smooth operation and proper clearance

The Dishwasher Float is an OEM replacement part for GE dishwashers. Located in the dishwasher's sump area, the float plays an important role in detecting water levels and ensuring proper filling and draining during cycles.

Causes of a bad float include normal wear and tear, mineral buildup within the dishwasher, or accidental impact damage.

Symptoms of a bad float include:

• Improper or inconsistent water level filling the dishwasher
• Inability to fully drain water after cycles
• Delayed cycles or unusual noises related to water functions

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.