Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
The Tub Gasket is an OEM part for GE dishwashers. It creates a watertight seal around the dishwasher tub, preventing water from leaking out during the wash cycle and ensuring efficient operation.
You should replace the tub gasket if it becomes worn, cracked, or damaged. Causes of a bad tub gasket can include normal wear and tear from repeated use, buildup of detergent and food debris, or physical damage from sharp objects or improper installation.
Symptoms of a bad tub gasket include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered a new gasket from AppliancePartsPros.com. It was very reasonable and came within a few days. The old gasket was worn out and catching on the lower dishrack as it was being pushed in causing the gasket to be dragged out of it's seat. This is partially due to the design of the dishwasher where the gasket is mounted on the tub rather than the door. Upon inspection the gasket was obviously cracked and not seating correctly which exacerbated the interference issue with the lower dishrack.... Read more
The Silverware Basket is an OEM part for GE dishwashers. It is designed to hold silverware and small utensils securely during the washing cycle, ensuring they are properly cleaned and sanitized.
Causes of a bad silverware basket can include cracking or breaking of the plastic material, warping from high temperatures, or damage due to heavy use or mishandling.
Symptoms of a bad silverware basket include:
With unbelievable acts of dexterity, acute knowledge of spousal unit, developed over a 25 yr marriage, and 30 plus years of handtool experience, a keen sense of cause and effect, and a flair for the dramatic. Probably 12 or more tools utilized in the opening of the box. Removal and replacement accomplished with the assistance of a 2 ton engine hoist, (perhaps it was overkill), some mig welding, 6 ft of duct tape, and some vise grips to hold it in place. In retrospect it would have been much... Read more
The Lower Door Gasket is an OEM part for GE dishwashers. It forms a seal around the bottom of the dishwasher door to prevent leaks and contain heat, moisture, and harsh detergent within the wash chamber.
Causes of a bad gasket can include cracking, warping or tearing of the rubber seal over multiple usage cycles and exposure to hot washing conditions.
Symptoms of a bad lower door gasket include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The Upper Dishrack Stud and Roller Assembly is an OEM replacement part for GE dishwashers. This assembly is an integral component that supports the upper dishrack during dishwashing cycles. This dishwasher upper rack roller includes the axle for mounting.
Symptoms of a bad upper dishrack assembly include:
Causes stem from normal wear over time, as continuous use can degrade guide rollers and mounting studs.
This OEM GE part is compatible with some Hotpoint, RCA, and select Kenmore models.
Finding the replacement parts for my dishwasher was quick and painless. Just use the model number and parts would come up with the diagram and some of the videos. Important to read the Q/A as it helped me to get ready on what I had to do and what tools to have. Ordered replacement parts for my GE dishwasher (about 7 years old). To replace the guide rail brackets, I removed the screws that secured the dishwasher to the counter and pulled out the dishwasher about 1/3 of the depth to have access... Read more
The Upper Spray Arm Assembly is an OEM part for GE dishwashers. This part sprays water throughout the upper section of the dishwasher, ensuring that all dishes are thoroughly cleaned during the wash cycle. The spray arm rotates to distribute water evenly, reaching every corner of the upper rack.
Causes of a bad spray arm can include mineral deposits clogging the spray nozzles, physical damage from dishware, or wear and tear over time.
Symptoms of a bad upper spray arm assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
A very simple fix. The retention tangs on the coupler had broke off, so I needed a replacement spray arm for the upper basket of my GE Adora dishwasher. Appliance Parts Pros offered a direct replacement and new gasket at a reasonable price. Literally...a 2 minute fix! Read more
This is a hinge spring. This piece applies tension when opening and closing a dishwasher door. The hinge spring prevents the from door dropping too quickly and hitting the ground when the machine is opened. This hinge also ensures that the door is completely shut and that there are no leaks during the washing cycle.If the door frequently falls open, will not stay closed, or will not latch this part may need to be replaced. The repair is fairly easy, but care should be taken because the hinge holds tension and may snap while being replaced. Keep in mind many dishwashers have springs on both sides of the door, so make sure to verify if the machine needs one or two replacements. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from manufacturers like General Electric and their brands Hotpoint, and RCA.
Removed two screws for the bottom access panel and two screws on the underside of the countertop. This allowed the dishwasher to be moved forward approximately 3 inches to access the spring location. There was no need to disconnect power or water. Tilting the top of the washer forward allowed additional room to hook the top of the spring to the hinge pin. The job took about 20 minutes total. Read more
Replaced the drain hose. and the pump hose. Relatively easy fix. Read more
Found the parts I needed very easily at appliance parts.com It took less than an hour to replace Read more
Performed the diagnosis steps 1) checked for blockage of drain hoses at the dishwasher pump and garbage disposal ends 2) checked for continuity of the motor windings 3) checked for 120 volts to the motor. All were okay. Replaced the drain pump motor. Read more
Replacing it and brace it. Perfect parts and quality Thanks Read more
Replaced the conduit the guide and the connection nut Read more