Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a dispenser that won't stop running water or ice, or won't dispense at all. This switch controls water and ice flow. Moderate DIY repair.
I had the original sensors in my Frigidaire, which were now about 18 years old. The water dispenser would work, but I would have to push in the lever and then draw it back until it found that "sweet spot." I finally got annoyed enough with the problem that I looked online. I almost purchased the dispenser actuator (the paddle), and glad I didn't because it was not the problem. Unless your lights are out, or it broke, the culprit will be these little dispenser switches which get pressed... Read more
Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.
I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did! Read more
Fix a refrigerator that only dispenses crushed ice with this ice dispenser solenoid assembly. Quick 20-minute DIY repair with video guidance.
Replaced solonoid. Video was very helpful. Parts came in the time frame given when I ordered the part. (1.7 days). Without the video I would have called a repairman. Thanks . Read more
Replacement crisper pan cover for refrigerators. Installs above crisper drawers. Replace if cracked, broken, or missing. Includes frame only.
Ordered new side bracket & glass-- had them in 2-days -- as we lived not far from the parts warehouse ( 200 miles). Had everything cleaned up prior to the pats arrival & was back in business --- 1/2 hour after receiving them. Great service and for very reasonable prices !! Read more
Rubber ice dispenser door center seals the ice chute on your refrigerator. Replace if cracked, worn, missing, or not sealing properly to stop frost buildup.
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more
Ice won't crush or dispenses poorly? A worn drive blade often causes ice crusher problems. This blade crushes and pushes ice through the dispenser chute.
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more
Plastic mounting block that anchors the refrigerator door handle assembly. Replace if cracked, broken, or causing a loose handle from repeated use.
No problem, 1 min to fix Read more
Ice dispenser not working or just humming? The auger motor drives ice from the bucket to the chute. Moderate DIY repair with step-by-step video guide.
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you... Read more
Glass insert that covers the crisper or snack pan in your refrigerator. Replace if cracked, shattered, or broken during cleaning or handling.
Looked up Refrig. model number on your site, then went to parts map, located part number, checked part to make sure the correct size, ordered part. As simple as that! Also, shipped on same day as ordered and received in 2 days :) Read more
Compressor not running but fan works? This inverter control board restores cooling when the compressor fails to start. Moderate DIY with video guide.
I watched YouTube videos for two days. I figured out it was the inverter board.I replaced the inverter board and it worked !!! I had to buy a meter to make sure the compressor was still good before I ordered the part. Read more
Supports the refrigerator door for smooth opening and closing. Installs at the bottom hinge. Replace if cracked, broken, worn, or causing noise.
Removed door, pulled out old hinge bearing and replaced with new one. Read more
Screw secures handles and components on freezers and refrigerators. Replace if stripped, broken, or missing. 10-16 x 0.500 threading fits most models.
Adjustable hinge kit for refrigerator doors. Includes components to secure and adjust door hinges. Replace if worn, broken, or door won't seal properly.
Ordered the replacement parts and had them the next day! Very nice. Read more
Storage bin that installs inside your refrigerator door to hold bottles, condiments, and containers. Replace if cracked, broken, or missing.
Ordered the correct replacement part and slid it into place. Read more
Drip tray installs below the water and ice dispenser to catch spills and drips. Replace if cracked, broken, or tabs are damaged causing it to fall out.
So I ordered the face plate and other parts that went with it and fixed it myself. The repair man wanted around $600 to do it. I believe kt cost around $160 to fix it myself. Read more
Dispenser not working or loose? This refrigerator dispenser frame secures ice and water dispenser components. Moderate DIY repair with video guide.
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly. Read more