Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Detergent and Rinse Aid Dispenser is an OEM part for GE dishwashers. It is responsible for holding and releasing detergent and rinse aid during the dishwashing cycle, ensuring that dishes are cleaned and rinsed effectively.
Causes of a bad detergent and rinse aid dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process. These issues can arise from regular use, buildup of detergent residue, or accidental impact.
Symptoms of a bad detergent and rinse aid dispenser include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Bought the replacement dispenser from APPros.com (of course). The video shows a front control panel, and our dishwasher has the 'hidden' control panel on the top of the door. So here's the difference: 1) You need to take out all the screws, except the two near the latch at the top. The other video shows only taking out the bottom six screws because the remainder of the screws hold the front control panel. I used a couple paint cans with rags on top to hold the corners of the door when... Read more
The Rinse Aid Cap is an OEM part for GE dishwashers. It securely seals the rinse aid dispenser, ensuring that the rinse aid is properly stored and dispensed during the wash cycle. This helps improve the drying process and prevents water spots on dishes and glassware.
You should replace this rinse aid cap if it becomes cracked, loose, or fails to seal properly. Common causes of a bad cap include wear and tear from regular use, damage from over-tightening, or deterioration due to exposure to dishwasher detergents and rinse aids.
Symptoms of a bad rinse aid cap include:
This was very simple. Thgey just popped back into place asnd the cap screws in. Read more
The Handle Actuator is an OEM part for GE dishwashers. This component plays a role in the dishwasher's operation by linking the door handle to the latch mechanism. When you pull on the handle, the actuator engages the latch, allowing the door to open smoothly.
Symptoms of a failing handle actuator include:
Causes of handle actuator failure typically involve mechanical wear from regular use, material fatigue, or damage incurred from forceful handling of the dishwasher door.
I got on the site and shared my issue. It was determined my door switches were bad, as well as my actuator. I ordered the parts (which arrived in just 2 days!) and I fixed it myself in just under 10 minutes, for under $30.00. Thanks guys!!!! Read more
The Water Inlet Valve is an OEM part for GE dishwashers. It is responsible for opening and closing the water supply to the dishwasher. It regulates the water pressure and ensures the proper amount of water is dispensed for each cycle. This part has a 3/8” inlet and includes the mounting bracket.
Causes of a faulty water inlet valve can include wear and tear over time, sediment or debris buildup, electrical component failure, or damage due to high water pressure. These factors can result in issues such as inadequate water flow, leaks, or the dishwasher not filling or draining properly.
Symptoms of a bad water inlet valve may include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Removed the old one. ordered a new one from appliancepartspros.com on Thursday afternoon, had the part on my front porch by Friday afternoon and installed it the next Monday morning. After I determined the problem, actual time fixing was maybe 30 minutes. Read more
The Upper Dishrack Roller Kit is an OEM assembly for GE dishwashers. It provides the smooth gliding motion essential for the upper dishrack to function properly. Nylon rollers rapidly move dishes through washing cycles for thorough cleaning. This kit contains 4 rollers and 4 axles. Symptoms of bad upper dishrack rollers include:
Causes of failure relate to normal wear of plastic pieces over time. Rollers may develop flat spots, cracks or loose bearings after years of supporting rack movement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Removed and cleaned all inside components of dishwasher. Replaced the sump inlet and fine filter. I decided to complete the repair myself when my appliance repairman did not want to help me. The videos from Appliance Parts Pro are AMAZING!!!! Gave me the confidence to do the repair myself (had to fully uninstall the machine and flip it over). THANK YOU!!! Read more
The Fine Filter is an OEM part for GE dishwashers. It is designed to trap food particles and debris during the wash cycle, preventing them from recirculating onto the dishes and ensuring clean, spotless results.
Causes of a bad fine filter can include clogs from food particles, damage from sharp objects, or wear and tear over time. A compromised filter can lead to poor cleaning performance and potentially damage other components by allowing debris to circulate.
Symptoms of a bad Fine Filter include:
My daughter and I went to Youtube and found an extremely well presented video on how to clean our exact make and model of dishwasher. We live in a newly rented house, new to us, not new. The dishwasher was an unholy nightmare of filth, clogged filters, calcium deposits coating and blocking in literal heaps, discovered when taken apart. The miracle really was that the dishwasher cleaned at all. We cleaned and scraped everything thoroughly, the fine filter and the sump filter as well but decided... Read more
The Whirlpool screw is an OEM replacement part responsible for securely fastening various components and parts within Whirlpool appliances. These screws are essential for maintaining the structural integrity and safe operation of the appliance. These screws hold together critical components like panels, brackets, handles, and internal parts.
This part fixes the following symptoms:
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
The Sump Filter and Cover is an OEM part for GE dishwashers. It filters out food particles and debris from the water during the dishwashing cycle, preventing the particles from recirculating and depositing on dishes. The cover ensures that the filter stays in place and also aids in the proper flow of water through the dishwasher.
A well-functioning sump filter and cover are vital for maintaining the cleanliness and efficiency of your dishwasher. Over time, the filter can become clogged with food particles and debris, which can reduce the effectiveness of your dishwasher.
Symptoms of a bad Sump Filter and Cover include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
The Door Gasket is an OEM part for GE dishwashers. It forms a seal between the dishwasher door and tub which is critical for proper operation. The gasket ensures excess water and moisture do not leak from the dishwasher during active wash and rinse cycles. It also helps keep noise levels low by providing sound insulation. This gasket measures 3/8 x 89 inches.
Common causes of a bad door gasket include regular wear and tear, exposure to high temperatures and detergents, or physical damage. These factors can cause the gasket to lose its flexibility and sealing capability.
Symptoms of a bad Door Gasket include:
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman". I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it... Read more
The Silverware Basket with Handle is an OEM part for GE dishwashers. It is designed to securely hold silverware and utensils during the washing cycle, ensuring they are effectively cleaned without damaging the dishwasher or other dishes. This basket features a handle, making it easy to remove and carry when loading or unloading cutlery. The silverware basket measures 8.5 inches in depth, 8.75 inches in height, and 7 inches in width.
Symptoms of a bad Silverware Basket include:
Causes of silverware basket damage often involve frequent use, exposure to intense heat and strong detergents, or overloading of the basket, which stresses the material.
We ordered the item appliance parts pros said would fit our make/model. the part arrived in perfect condition faster than i could possibly imagine, and while it fit our machine, it was a big bigger than the original and it fits off-center, but i guess it works fine! excellent speed and ease of ordering. thanks Read more
The Dishwasher Water Inlet Valve is an OEM part for GE dishwashers. It controls the flow of water into the dishwasher during each cycle phase. The valve regulates water pressure and volume to provide the right amount for washing, rinsing, and adjusts flow based on cycle settings.
Causes of a bad water inlet valve include mineral buildup from water hardness inhibiting movement or damage allowing leaks.
Symptoms of a bad inlet valve are:
This genuine GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I took the inlet valve apart, found it was clogged with sediment, so I cleaned it and reinstalled it. Water was still not filing, so I figured the valve was sticking. I ordered a new valve,because $30 was a lot cheaper than a new dishwasher. I took out the old valve with two screws, and disconnected the supply line, the brass elbow, one hose, and a wiring harness. I reattached it in the same place, re-using the all the other parts, and once I turned the power and water back on, it worked as... Read more
The Pump Connector is an OEM part for GE dishwashers. This connector joins the dishwasher’s pump to the drain hose, facilitating the proper expulsion of water during the draining cycle. It ensures a secure and leak-free connection, essential for the efficient operation of the dishwasher.
Over time, the pump connector can become compromised due to wear and tear, exposure to detergents and hot water, or damage from debris. If the connector fails, it can lead to leaks and drainage issues, impacting the dishwasher's performance.
Symptoms of a bad pump connector include:
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
The Soap Dispenser Lever is an OEM part for GE dishwashers. It operates the soap dispenser door, releasing detergent into the dishwasher at the appropriate time during the wash cycle. This lever ensures that detergent is dispensed efficiently for optimal cleaning performance.
Causes of a bad soap dispenser lever can include wear and tear over time, accumulation of detergent residue, or damage due to accidental mishandling or impact. When the lever malfunctions, the detergent might not be released properly, leading to poor cleaning results.
Symptoms of a bad soap dispenser lever include:
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then... Read more
The Lower Dishrack Roller is an OEM part for GE dishwashers. Good rollers allow the dishrack to slide in and out of the dishwasher smoothly. These rollers attach to the dishrack, providing mobility and convenience when loading or unloading dishes. Note: This kit includes one roller and one axle.
Causes of damage to the dishrack rollers often involve overloading the dishrack with heavy dishes, which can put excessive stress on the rollers, or normal wear and tear from repeated use.
Symptoms of a bad Lower Dishrack Roller Kit include:
I found my parts and ordered the six I needed, however I did not pick up on the difference from the front wheels to the rear wheels in the the descriptions. The rear wheels are narrower and I ordered all front wheels, six fronts instead of four front and two rear. I made it work by using the axle from the new wheel with two old narrow wheels. Read more
The Detergent Cup Latch is an OEM part for GE dishwashers, specifically designed for certain models. It is located on the detergent dispenser assembly. When the detergent cup is loaded with detergent, the latch holds it in place and prevents it from accidentally opening or spilling during the wash cycle.
Causes of a faulty or damaged detergent cup latch can include regular wear and tear, misalignment, or breakage. These factors can result in issues such as the detergent cup not staying closed, detergent not being dispensed properly, or leaks from the detergent compartment.
Symptoms of a bad detergent cup latch may include:
The Center Wash Arm Assembly is an OEM component specifically designed for GE dishwashers. It is the main wash arm responsible for spraying water across the center rack area during cycles to effectively clean dishes. The wash arm measures approximately 3/4” H x 2 ¾” W x 19” D.
Causes of a bad center wash arm assembly can include clogs from food particles or hard water deposits, damage from dishware, or wear and tear from frequent use. A malfunctioning wash arm can lead to poor cleaning performance and spots or residue on dishes.
Symptoms of a bad center wash arm assembly include:
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more