Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
First I ordered a new ice door seal, spring, and crank, figuring the condensation in freezer and door was caused by ice door not sealing. Turns out the solenoid for the ice door was completely rusted and was the primary cause, if it had been replaced early, it would have saved the dispenser board. What then happened was the moisture in the freezer door damaged the control board rendering dispenser controls inoperative as well as the heater around the dispenser. Now the freezer door is dripping... Read more
Replaced the worn parts. Read more
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more
Replaced Ice maker very easy. Read more
Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly. Read more
Color: white. It measures about 16.5 inches wide by 4 inches high by 5.5 inches deep.
Replaced shelves Read more
Color: white. Measures about 16 inches wide by 2 inches high by 2-1/2 inches deep.
Ordered replacement parts. Had trouble attaching handle with gasket. Had to look at vege draw to figure it out. Read more
I had 2 parts that were cracked, so after changing the cracked parts as well as the dispenser switch, it was back to working normally. Simple to make the needed repairs and the videos provided on your website really helped in being prepared. Read more
This is the front rail for a freezer door shelf. It replaces a cracked or missing retainer so items stay securely on the door, restoring usable storage and helping prevent jars and packages from sliding out.
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward. Read more
Once I got the part in the mail, I washed it and installed it in less than 2 minutes. Didn't need any tools! Read more
I had to replace the Combined Hmi Asm Bk. I watched a video online about how to remove the part and it took around 15 minutes to replace. The new part works great and extremely fast delivery by appliancepartspros.com! Read more
Pulled broke one out replaced with new one. Read more
Replacing the roller assembly corrected the problem. The key to replacing the roller assembly is elevating the refrigerator high enough to remove the roller assembly. (1) Raise and secure the refrigerator, (2) remove the metal bar across the bottom of the refrigerator to provide adequate access to the roller assembly (2-screws), (3) remove the roller assembly adjustment screw, (4) pry the roller pivot pin out, (5) pull the roller assembly toward the front of the refrigerator to remove, (6)... Read more
Color: White
Using the help and the tutorial I was able to find out that the defrost heater had failed. I ordered the part from Appliance Parts Pro. I have installed it and so for so good. Read more
A cap handle is a feature on refrigerators that allows the user to operate the device easily. The cap handle is located on the lower portion of the door handle. It is a largely cosmetic item, but it is also an access point if the door handle has to be removed. It covers the screws that hold the handle in place.A visual inspection will determine the condition of a cap handle. The replacement of this component is a quick and straightforward process. If there is an existing cap handle, remove it entirely first. Clean the area where the new cap handle will be placed. Align the part in the proper position and apply pressure. It will snap into place when done correctly.This cap handle is a genuine OEM replacement part. It is sourced directly from the manufacturer. The cap handle is made of durable materials and sold as an individual unit. This cap handle fits on various models of refrigerators. It is compatible with appliances manufactured by General Electric, Hotpoint, and RCA.
Replaced them Read more