Gsh22jsdd Ss Parts

Best Seller

Genuine Ge part

Handle Pan Snack

By: Ge

Part Number: WR17X12492

The Snack Pan Handle is an OEM replacement part for GE bottom-mount refrigerators. This specialty handle provides access to stored snacks, drinks, or condiments within the snack pan shelf located above the main fresh food compartment.

Causes of a faulty handle can include broken mounting clips from repeated grasping, or general wear and tear of the plastic surface.

Symptoms include:

Loose or unstable handle that does not grip the shelf securely
Handle detaching completely from shelf mounting points
Inability to retrieve items placed on the snack shelf

It is compatible with Hotpoint, RCA, and specific Kenmore models as well.

Do-It-Yourself Stories from Customers like You Pan snack drawer cracked due to abuse from gorilla boys John W. • Kinnelon , NJ • January 09, 2016

Replaced with new snack pan drawer Read more

Best Seller

Genuine Ge part

Light Lens Shield

5.0 (10)

By: Ge

Part Number: WR17X12486

The Light Lens Shield is an OEM component for GE refrigerators. As a cover installed behind the door light source, it protects sensitive refrigerator components. This shield measures about 16 inches wide by 5 inches high.

Normal wear occurs due to regular door opening/closing cycles inevitably generating friction over many years. Excessive impact from heavy load placements could potentially crack rigid plastic covers as well.

Symptoms of a damaged or defective light lens shield include:

Gaps exposing electrical wiring to potential spills
Loose fit unable to block light leakage from peeping behind
Signs of stress fractures or cracks in the protective covering
Discolored stains or residue buildup along plastic edges

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You My refrigerator was leaking water from underneath additionally the water and ice dispenser was not dispensing much ice or water Cynthia H. • Coarsegold , CA • June 28, 2017

After chatting with an appliance parts pro person, I was able to narrow down which parts I needed to buy. I ended up replacing the water inlet valve, the cold water reservoir and a drain tube. I have never really repaired anything like this before, but as a recent widow, I knew I needed to learn. Appliance Parts Pros made it super simple with their videos. It took me quite a bit longer than the people in the videos, but that was just because I rewatched sections of the videos several times to... Read more

Best Seller

Genuine Ge part

Dispenser Drip Tray

5.0 (16)

By: Ge

Part Number: WR17X10745

The Dispenser Drip Tray is an OEM part for GE refrigerators. It's placed beneath the water and ice dispenser to catch drips and spills, preventing water from running down the front of the refrigerator or onto the floor. This part not only helps in keeping the dispensing area clean but also minimizes the risk of slip hazards caused by wet floors.

Over time, the dispenser drip tray can become stained, cracked, or warped, affecting its appearance and functionality.

Symptoms of a bad Dispenser Drip Tray include:

Persistent stains or discoloration that cannot be cleaned
Cracks or warping that prevent the tray from fitting properly
Water leakage due to the tray not catching drips efficiently

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Melted the water dispenser parts trying to unfreeze the water line Janie M. • Pasadena , CA • February 18, 2015

Was an easy swap. Ordered the pieces, got them withing two days. Didn't realize a hair dryer would melt so much of the plastic pieces that I couldn't even see while trying to defrost the water line in the door. Next time it happens I will just empty the freezer and leave the door open for a few hours. Will save me from making this mistake again. Thankfully easy to replace the parts myself and not too expensive. Read more

Best Seller

Genuine Ge part

Front Roller Assembly

4.7 (3)

By: Ge

Part Number: WR02X12454

The Front Roller Assembly is an OEM part for GE refrigerators. It's designed to support the front part of the refrigerator, allowing for smooth and easy movement when you need to shift the appliance for cleaning, maintenance, or repositioning. This roller assembly ensures the weight of the refrigerator is evenly distributed, reducing strain on the floor and making it easier to move the refrigerator without damaging the flooring or the appliance itself.

Causes of a bad Front Roller Assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or corrosion over time.

Symptoms of a bad Front Roller Assembly include:

Difficulty moving the refrigerator
Uneven positioning or tilting of the refrigerator
Excessive noise or resistance when attempting to move the appliance
Visible wear or damage to the rollers

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The front rollers had deteriorated and the refrigerator could not be moved without damaging the floor. Michael G. • Pulaski , TN • January 08, 2022

Replacing the roller assembly corrected the problem. The key to replacing the roller assembly is elevating the refrigerator high enough to remove the roller assembly. (1) Raise and secure the refrigerator, (2) remove the metal bar across the bottom of the refrigerator to provide adequate access to the roller assembly (2-screws), (3) remove the roller assembly adjustment screw, (4) pry the roller pivot pin out, (5) pull the roller assembly toward the front of the refrigerator to remove, (6)... Read more

Genuine Ge part

Slide Out Shelf Assembly

5.0 (3)

By: Ge

Part Number: WR32X10381

Do-It-Yourself Stories from Customers like You Broken shelf Charles D. • Lake Zurich , IL • January 23, 2015

Ordered the new shelf from Appliance Parts Pros, which was a genuine OEM part and much less expensive than the GE Store. Lifted the old shelf out, popped the new one in and it was done. two minutes. Read more

Genuine Ge part

Meat Pan Glass Cover

4.8 (6)

By: Ge

Part Number: WR32X10595

Do-It-Yourself Stories from Customers like You 12 y o rental unit ge side by side was missing parts and dispenser was non functional Scott M. • Asheville , NC • October 04, 2015

First I ordered a new ice door seal, spring, and crank, figuring the condensation in freezer and door was caused by ice door not sealing. Turns out the solenoid for the ice door was completely rusted and was the primary cause, if it had been replaced early, it would have saved the dispenser board. What then happened was the moisture in the freezer door damaged the control board rendering dispenser controls inoperative as well as the heater around the dispenser. Now the freezer door is dripping... Read more

Genuine Ge part

Axle Wheel

5.0 (1)

By: Ge

Part Number: WR01X10604

Do-It-Yourself Stories from Customers like You GE refrigerator front and rear wheels. The rubber shell on the wheels had cracked and peeled off. Carl C. • London , OH • August 18, 2023

The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more

Genuine Ge part

Freezer Shelf Support

4.8 (5)

By: Ge

Part Number: WR02X11561

Do-It-Yourself Stories from Customers like You Ice maker stopped working. Jorge J. • Winter Garden , FL • April 05, 2019

Replaced Ice maker very easy. Read more

Genuine Ge part

Drain Tube

5.0 (4)

By: Ge

Part Number: WR02X11476

Do-It-Yourself Stories from Customers like You Clogged drain tube Keith P. • Ivoryton , CT • March 03, 2017

Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly. Read more

Genuine Ge part

Freezer Door Shelf Front (Rail)

By: Ge

Part Number: WR17X12069

This is the front rail for a freezer door shelf. It replaces a cracked or missing retainer so items stay securely on the door, restoring usable storage and helping prevent jars and packages from sliding out.

Serves as the front retaining rail for a freezer door shelf/bin
Holds items in place during door opening and closing
Restores function when the original rail is cracked, broken, warped, or missing
Typical symptoms: items falling from the door, loose/wobbly rail, visible damage

What's included: 1 freezer door shelf front Install notes:

Disconnect power and remove items from the affected door shelf
Lift out the damaged rail and clean the mounting area
Align the new rail with the door's tabs/slots and press until it seats evenly and locks in place
Reload items and confirm the rail is secure

Genuine Ge part

Roller Pivot Pin

4.0 (1)

By: Ge

Part Number: WR02X12254

Genuine Ge part

Shelf Chiller

5.0 (3)

By: Ge

Part Number: WR71X10961

Do-It-Yourself Stories from Customers like You Chiller shelf. Michael C. • Binghamton , NY • June 30, 2020

Pulled broke one out replaced with new one. Read more

Genuine Ge part

Freezer Light Shield

5.0 (3)

By: Ge

Part Number: WR17X10765

Do-It-Yourself Stories from Customers like You Frig leaking water Richard M. • Colorado Springs , CO • February 18, 2019

Refrigerator with broken water dispenser line. Watched repair video on Appliance Parts Pro website. Ordered cold water reservoir part along with some other light cover and freezer drawer. Parts fit perfectly, repair went like shown in video. Also, called Appliance Parts Pro after not receiving order due to USPS delivering to wrong address, and another order sent out that same day with same parts. Kudo's to not only great repair info and parts availability but also superb customer service. Read more

Genuine Ge part

Basket Slideout (Freezer), White

5.0 (2)

By: Ge

Part Number: WR21X10015

This slide-out freezer basket is a removable storage bin that restores organization and easy access to the freezer compartment. Replaces a cracked, broken or missing freezer basket and improves reachability for frozen items. What it does:

Provides a removable, slide-out storage bin for frozen foods to keep the freezer organized.
Restores smooth sliding action and full access when the original basket is damaged or missing.
Helps prevent items from shifting or falling by containing loose packages on the freezer shelf.
Fits the freezer compartment rails and is intended as a direct replacement for the original basket.

What's included: One white slide-out freezer basket. Install notes:

Disconnect power to the appliance before attempting any repairs.
Remove any freezer drawers or shelves as needed for access; align basket rails and slide into place.
Handle plastic components carefully to avoid cracks; do not force the basket over damaged rails.
If sliding action remains poor after replacement, inspect rails and guides for wear or obstruction.

Do-It-Yourself Stories from Customers like You Frig leaking water Richard M. • Colorado Springs , CO • February 18, 2019