Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Mounts at the upper corner of the cabinet to support and pivot the refrigerator door. Replace if bent, cracked, or missing to restore door alignment.
A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent... Read more
Hex washer head screw secures panels, brackets, and components in your refrigerator. Replace worn, stripped, or missing screws for proper alignment.
Replacement #8-15 thread screw for securing refrigerator panels, brackets, and covers. Replace stripped, corroded, or missing hardware to restore alignment.
Replacement shelf fit easily, perfectly. Was going to swap out screw for door handle, but found it was now tight. Will hang on to replacement screw until handle becomes loose again. Read more
Supports and guides the deli drawer in your refrigerator's fresh food section. Replace if worn, broken, or causing drawer sticking, sagging, or derailment.
Watched the repair videos on appliances parts pro & followed the video instructions. Read more
Plastic divider that fits inside the full-width pantry or deli drawer to create separate sections. Replace if cracked, broken, or missing to restore organization.
Since there was space for another divider I purchased and installed it no tools required. Now the drawer has three equal spaces and is better organized, can separate deli, cheeses etc. Read more
Supports and enables smooth movement of your refrigerator cabinet. Replace if cracked, broken, or crumbled to restore stable positioning and mobility.
I contacted Appliance Parts Pros' wonderful (comprehensive and accurate) website, to search for the part. I located the part, so I ordered it and received it within 4 days, which is also an advantage of using Appliance Parts Pros. Upon arrival of the part, I had to grind off one end of the river that acts as a hub for the wheel to turn on. Then I slipped the the plastic wheel, that I received from Appliance Parts Pros, onto the rivet and welded it to the metal cage it fits onto. Finally I... Read more
Freezer running too warm or too cold? This thermistor cover shields the temperature sensor for accurate cooling. Simple snap-in installation fixes misreads.
Took things apart after watching the videos and saw the ice maker was functional but all corroded or dirty with stuff from water and in watching the video realized the water on the floor was unrelated to the ice maker. I bought the parts to make the repair. Two comments to the videos, the one for the icemaker should show how to get the top basket out of the freezer. I found another video that showed how to do that and was much easier to get to the ice maker and to remove the back panel. ... Read more
Ice cubes jamming or hanging up in the ice maker? This stripper arm guides cubes off ejector fingers into the bin. Requires removing ice maker to install.
Ordered part from you guys and fixed it myself! Read more
Factory black screw that secures panels, trim, or brackets on your oven. Replace missing, stripped, or damaged fasteners to restore secure fit.
Turned off breaker,unscrewed (2 screws) element,pulled element out from back of oven,unplugged 2 wires, attached wires to new element, pushed back in, installed retaining screws Read more
Replaces cracked or broken refrigerator light covers. Protects bulb and shields components from moisture. Slides into place with mounting tabs. Verify fit.
Replaced the cover Read more
Replaces a broken, bent, or missing ice maker shut-off arm. This lever attaches to the ice maker module to control ice production cycles in your fridge.
I bought the replacement arm and installed it and now all is well! Read more
Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.
Removed all the food from the freezer and most from the fridge before starting. Tipped fridge back until I could place a 2 x 4 a couple of inches behind the front rollers. With the front of the fridge now approximately 3 to 4" off the ground you can remove the adjusting bolt and the roller assembly can be pulled out of the brackets. Slide out of the notches where that hold it into the bracket. Same to install. Read more
Right-hand mounting adapter bracket secures end caps, trim, or shelf assemblies to your refrigerator cabinet wall. Replace if cracked, broken, or worn.
Secures covers, brackets, and internal panels in your refrigerator. Replace missing, stripped, or corroded screws to restore tight mounting.
I ordered the part from you which arrived much sooner than expected. I replaced the Rail-Mulln. It was so easy to fix, next time I'll let my wife do it. Read more
Mounting screw for refrigerator door handles. Secures handle to door panel. Replace if stripped, missing, or won't hold handle firmly in place.
Support brace rod for refrigerator crisper drawer frames. Installs horizontally to prevent sagging. Replace if bent, broken, or missing to stabilize drawers.