Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement screw for refrigerator door hinges. Needed when the original screw is stripped, broken off, or missing from the hinge assembly. 10-32 x 3/4 inch.
Fix a refrigerator that won't cool, clicks repeatedly, or has a blank display by replacing the main electronic control board. Moderately difficult repair.
I replaced the ice door motor with new hardware, circuit board on touch panel display then the main ECB on top in the doghouse. It finally came to life and started working! No issues with the front panel and everything works as it did! Read more
Fix clicking noise, poor cooling, or overheating compressor by replacing a cracked or warped condenser fan blade. Restores airflow across the coil.
At first, I thought that it was the defrost timer, but when I took apart the freezer, I found that the evaporator fan motor wasn't running, so I replaced it. Read more
If your refrigerator isn't staying at the right temperature or runs too warm, the thermistor may have failed. This sensor monitors compartment temps.
First I did the obvious: Changed the evaporator fan motor and condenser fan motor. Then I realized there was too little air flow from the freezer to the refrigerator, so I replaced the air baffle assembly. Now everything works again. This should have been a piece of cake, but in the 48" Kitchenaid side-by-side built-in, the baffle assembly is mounted on the side wall of the refrigerator rather than the back wall as the video showed. That means the hole for the rear of the two screws holding... Read more
Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.
Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel... Read more
Ice chute frosting or water leaking onto dispenser pad? This ice dispenser door assembly seals the chute opening to prevent warm air entry and frost buildup.
Replaced worn-out door chute pad. Read more
Ice won't dispense or comes out slowly? A worn or stripped ice auger is often the culprit. This repair restores smooth dispensing in 30-45 minutes.
Found bad auger motor drive shaft, it was rounded on the end that goes into motor. While I was there I replaced the seal, auger (old one rusty) and coupler. The new auger is stainless steel (I believe and slightly longer) and should not corrode like old white one. If changing auger, make sure you put the assembly back together correctly (take a few pics of the old one and lay it out as taken apart). As always, parts arrived quickly. Read more
Hex head screw for trash compactor assembly. Replaces lost, stripped, or damaged screws during repairs. Essential hardware for securing components.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Refrigerator not cooling or running constantly? This compressor circulates refrigerant to restore proper cooling. Professional installation recommended.
No water or slow flow from dispenser? A faulty water inlet valve is often the cause. This valve regulates water supply to your refrigerator's dispenser.
Replaced the water inlet valve. Because my fridge (KitchenAid) is a commercial style with the compressor on top, the inlet valve was underneath the fridge so most work done laying on my side. I raised the feet as high as they would go, released to two screw for the metal housing that the inlet valve was attached to then swung it toward the front. From here, I was able to remove the two screws holding the inlet valve to the metal housing freeing it. Then I removed the hoses and the electrical... Read more
Actuates the ice dispenser chute flap to open and close during dispensing. Replace if the door won't move, stays open, or fails to seal the chute properly.
Fix a refrigerator light that stays on or won't turn off with this light cam assembly. Interfaces with the door switch to restore proper lighting control.
Ice chute door won't close or dispenser flap sticks? This door bracket connector links the bracket to the hinge linkage. Easy DIY repair in under 30 minutes.
I chose to replace all the involved parts since everything was 12 years old. My parts were exactly what I needed. It was easy to take apart the ice chute mechanism and replace with the new parts. It works great!! Read more
Replaces a bent, worn, or damaged refrigerator door hinge. Restores smooth pivot action and proper door alignment for even gasket seal contact.
Catches drips and condensation from your refrigerator's dispenser area. Replace this tray if cracked, broken, or missing to prevent water puddles and stains.
Loose panels or rattling components? This mounting screw secures body panels and electronics in appliances. Quick 5-minute fix for most models.
VERY EASY TO REPLACED OLD COVER-UNIT NEW COVER-UNIT. Read more