Jvm316od4cc Parts

This factory glass panel replaces a cracked, shattered, or missing original, restoring a clean, safe cover/viewing surface on your appliance. It helps protect internal areas from splatter and keeps the assembly looking and fitting the way it should.

• Replaces a damaged glass component within the original assembly on applicable models
• Restores a clear, smooth surface for proper appearance and function
• Helps shield underlying parts from spills, grease, and debris
• Common symptoms: cracked or shattered glass, missing piece, sharp edges, looseness/rattling

• Disconnect power before servicing; allow all surfaces to cool
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Support the panel/door during removal and installation to prevent stress on frames/hinges

The Microwave Thermostat is an OEM part for GE Countertop Microwaves. It is a critical component that monitors the microwave's internal temperature to ensure safe operation. 

Causes of a bad thermostat can include failure of internal components due to prolonged heat exposure during cooking cycles over many years of use. Steam and splatters introduced into the microwave from heated foods can also damage sensors.

Symptoms of a bad thermostat include:

• Inability to heat or reheat foods adequately 
• Short cycling of the microwave interior lights 
• Erratic power levels during cook functions
• Overheating errors or shutoffs for safety

This replacement thermostat is also compatible with RCA and some Kenmore countertop microwave models.

This waveguide cover protects the microwave's waveguide opening from food debris and prevents arcing that can damage the magnetron. Replacing a damaged cover helps restore safe microwave operation and consistent cooking results. What it does:

• Shields the waveguide and magnetron from grease, splatter, and food particles.
• Helps prevent sparking or arcing inside the cavity when the cover is intact and undamaged.
• Reduces the risk of damage that can cause uneven heating or microwave failure.
• Visible burn marks, holes, or charring on the cover are common signs it needs replacement.

• One waveguide cover and mounting nut.

• Unplug or disconnect power before servicing the microwave to avoid electric shock.
• Access typically requires removing the outer cabinet or inner trim panels—follow your model's service instructions.
• Handle the cover gently; avoid bending or cracking the material during installation.
• Do not operate the microwave if the waveguide cover is missing or damaged.

This is a complete microwave door assembly in a black finish. It replaces a damaged or loose door so the cavity closes and latches properly, restoring normal operation and the original appearance.

• Provides the hinged, latched door for the microwave cavity
• Helps resolve issues such as the door not closing/latching, broken trim/handle, or visible door damage
• Enables proper engagement of the door latches/interlocks so the unit can run when closed
• Refreshes the exterior look with a matching black door

• Disconnect power to the appliance before servicing
• Support the door; remove any hinge cover/retaining hardware as your model requires, then lift the door up and off the hinges
• Transfer any model-specific parts from the old door if needed, set the new door on the hinges, and secure
• Do not disassemble the door; replace it as a complete assembly

Black replacement control panel for select microwaves. It restores a clean, readable interface so you can set time, power, and cooking options when the original panel is cracked, faded, or the keypad stops responding.

• Provides the user interface for starting/stopping and selecting cook times, power levels, and functions
• Houses the keypad/touchpad and display window within a black fascia
• Common symptoms of failure: unresponsive or intermittent buttons, incorrect inputs, or beeping without pressing
• Also replaces panels with physical damage like cracks, broken tabs, or worn/peeling overlay graphics

• Disconnect power before servicing; microwaves contain high-voltage components
• Remove upper grille (if applicable) and panel mounting screw(s), then lift the panel out
• Disconnect wire harness/ribbon carefully; retain and transfer any brackets or hardware as needed
• Reconnect, secure the new panel, restore power, and test all keys

This cooktop lamp socket is the replacement holder that secures the cooktop bulb and provides the electrical connection so interior or surface lights work reliably. Restores proper bulb seating and electrical contact for safe lighting. What it does:

• Holds the cooktop light bulb in place and provides the electrical connection to power the lamp
• Re-establishes a secure contact if the original socket is loose, burned, or cracked
• Helps resolve symptoms like a bulb that flickers, won't stay lit, or fails to power on
• Compatible with standard cooktop light bulbs used in many GE cooktops

• One cooktop lamp socket

• Disconnect power to the appliance before servicing to avoid electric shock
• Inspect wiring and terminals for damage; replace any frayed or heat-damaged wires
• Securely seat the bulb and test operation before reassembling the cooktop

Temperature-sensing thermostat that controls an appliance's heating cycle to keep temperatures within a safe operating range. Replacing a failed thermostat restores proper temperature cycling, helps prevent overheating, and stabilizes performance. What it does:

• Opens or closes at its designed trip point to control heating elements or temperature circuits.
• Stops heating when the set temperature is reached and allows heating to resume when temperature falls.
• A faulty thermostat can cause no heat, continuous heating, erratic cycling, or temperature that never stabilizes.
• Used as the temperature control device in the appliance's heat-regulation system.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Match wiring and mounting to the original thermostat; do not force terminals or sensor elements.
• Handle the sensor and terminals carefully to avoid damage; do not kink or crush the sensing element.

This resin canopy is the interior ceiling cover inside the microwave cavity. It shields the stirrer area from grease and splatter to help maintain even heating and protect internal components for safer, more reliable cooking. What it does:

• Covers and protects the stirrer/waveguide opening at the top of the cavity
• Helps promote even microwave energy distribution for consistent cooking
• Shields internal parts from grease, steam, and food debris
• Replace if warped, cracked, burned, discolored, loose, or if you notice arcing/sparking inside the cavity

• 1 resin canopy

• Disconnect power before servicing; microwave components can carry high voltage
• Remove the old canopy by releasing tabs or fasteners from inside the cavity
• Clean the cavity roof and seating surfaces before installation
• Ensure the canopy is fully seated and do not operate the microwave without it installed

This damper bracket secures the air damper assembly to the appliance, keeping the damper aligned for proper venting and reducing vibration. Replacing a damaged bracket helps restore stable damper movement and correct airflow. What it does:

• Secures and supports the air/vent damper so it can open and close correctly
• Prevents rattling or vibration caused by a loose or broken bracket
• Helps resolve improper venting or inconsistent temperature control linked to a misaligned damper
• Works as the mounting point for the damper assembly to the cabinet/chassis

• One damper bracket

• Always disconnect power (and water, if applicable) before servicing the appliance
• Access typically requires removing panels—watch for sharp edges and keep fasteners organized
• Bracket installs with mounting screws; verify damper alignment and smooth movement before reassembly

The High Voltage Diode is an OEM replacement part for GE microwaves. It converts the high voltage of the microwave's power supply into a lower voltage suitable for the magnetron. It acts as a one-way valve for electrical current, allowing it to flow in one direction while preventing it from flowing back in the opposite direction.

Symptoms of a faulty high voltage diode include:

• No power or complete loss of power to the microwave
• Inconsistent or inadequate heating performance
• Unusual electrical smells during operation

A bad high voltage diode can occur due to electrical malfunctions, power surges, or excessive heat exposure. If you notice issues such as no power, uneven heating, or unusual electrical smells coming from the microwave, it may be time to replace the old or damaged high voltage diode with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Thermostat is an OEM part for GE microwaves. It acts as a temperature-sensing component that monitors internal heat levels and provides feedback to electronic controls. 

Causes of thermostat failures can involve deterioration over extended use under intermittent high heat stresses.

Symptoms of a bad thermostat include:

• Inability to properly cook or reheat foods thoroughly  
• Temperature readings malfunction triggering errors
• Magnetron shutting off unexpectedly mid-cooking cycle
• Cook settings not functioning optimally  

This OEM GE replacement is compatible with Hotpoint, RCA and some Kenmore microwave models as well. 

This is the front control panel where you interact with the appliance. It replaces a cracked or worn panel so the display window and controls are properly supported, aligned, and easy to read.

• Houses and protects the display and user controls; provides the labeled interface surface
• Restores fit and appearance if the original panel is cracked, warped, or damaged
• Helps address loose/misaligned controls or gaps caused by broken mounting tabs
• Finish/style: black panel configured for units with white LED indicators

• Disconnect power at the breaker before servicing
• Remove knobs/buttons and perimeter screws; lift off the old panel carefully
• Transfer any brackets, clips, or trim from the original panel as required by your model
• Align the new panel and reinstall hardware; do not overtighten screws

The white handle Assembly is an OEM part for GE built-in microwave oven models. It securely holds the door in place duraing cooking operations.  

Causes of failure include corrosion of metal mounting brackets from steam exposures over time, impact damages compromising structural integrity, as well as wear on plastic contact points reducing a secure closure.

Symptoms of a faulty handle assembly include:

• Loose door vulnerable to accidental opening during a cycle 
• Risk of steam burns if seal effectiveness is reduced
• Degraded aesthetic cohesion with surrounding cabinetry

This OEM handle assembly fits Hotpoint and RCA built-in microwaves.

This magnetron is the microwave's high-frequency energy source. Replacing a weak or failed tube restores consistent heating performance so food warms evenly and cook cycles complete properly.

• Generates the microwave energy that heats food
• Works with the transformer, capacitor, and diode in the high-voltage circuit
• Failure signs include: runs but does not heat, intermittent or weak heating, or a loud humming/buzzing noise

• Disconnect power; the high-voltage capacitor can retain a dangerous charge—discharge per service information before servicing
• Do not run the microwave with the cover removed
• Handle by the metal body; avoid touching or damaging the antenna/insulator. Secure mounting screws and reconnect terminals firmly
• After reassembly, test with a cup of water to ensure proper heating and fan operation

This control panel bracket supports and secures the user interface assembly to the appliance frame. Replacing a damaged bracket restores a solid, correctly aligned panel so buttons and display sit properly without flex, gaps, or rattles.

• Provides the structural mount for the control panel assembly
• Maintains proper alignment of keypad/display and surrounding trim
• Helps correct a loose, wobbly, or misaligned control panel
• Replaces brackets that are cracked, bent, or stripped at mounting points
• Reduces vibration or rattling noises from the panel area

• Disconnect power at the breaker or unplug before servicing; if working on a microwave, high-voltage components can retain a charge.
• Support the control panel when removing fasteners to avoid straining wire harnesses.
• Transfer any reusable clips, insulation, or screws from the original bracket.
• Avoid pinching harnesses.

This fuse assembly is a safety component that opens the circuit when an overcurrent or short occurs, protecting the appliance's wiring and electronics. Replacing a blown fuse assembly can restore power once the underlying fault has been corrected. What it does:

• Provides overcurrent protection by interrupting power during a fault
• Helps with symptoms such as a completely dead unit, dark display/control panel, stopping mid-cycle, or repeatedly blown fuses
• Protects internal wiring and control components from damage
• Designed to fail safely to prevent further electrical issues

• 1 fuse assembly

• Disconnect power to the appliance before servicing; if hardwired, switch off the circuit breaker
• Replace only with the correct fuse type/rating specified for your model
• Identify and correct the root cause of the blown fuse (e.g., shorted wiring or component) to avoid repeat failure