Ksbs25ivbloo Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Whirlpool part

Slide

By: Whirlpool

Part Number: 2306900

$51.28

Compare At:: $61.54
You Save:: $10.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Condenser

By: Whirlpool

Part Number: W10131059

$155.57

Compare At:: $180.65
You Save:: $25.08

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Screw

By: Whirlpool

Part Number: W10151272

$12.95

Compare At:: $13.12
You Save:: $0.17

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Tube

By: Whirlpool

Part Number: W10528579

$163.27

Compare At:: $171.46
You Save:: $8.19

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Lever, Ice Dispenser (Wht)

4.9 (18)

By: Whirlpool

Part Number: WP2180259

The Ice Dispenser Lever is an OEM component specifically designed for Whirlpool side-by-side refrigerators with built-in ice dispensers. Located inside the ice and water compartment, the lever is responsible for releasing cubed or crushed ice when engaged.

Symptoms of a bad ice dispenser lever include:

Failure to dispense ice when the lever is lifted
Loose, wobbly, or uneven movement of the lever
Ice dispenser mechanism not triggering properly

Causes of a bad lever can be worn gears or connector linkages inside the ice dispensing mechanism from repeated use over time.

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and select Kenmore fridge models.

Do-It-Yourself Stories from Customers like You The ice dispenser lever was cracked and did no longer trigger the dispensing of the ice Andrea M. • Honolulu , HI • March 01, 2015

I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better. I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some... Read more

Best Seller

Genuine Whirlpool part

Ice Door Kit

4.8 (205)

By: Whirlpool

Part Number: W10823377

Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.

This part fixes the following symptoms

Door sweating
Door won't open or close
Freezer section too warm

Do-It-Yourself Stories from Customers like You Ice cube dispenser/flap was broken not actuating the ice bucket motor. Peter P. • Sonoma , CA • July 24, 2023

Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy. When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire... Read more

Best Seller

Genuine Whirlpool part

Broken Tab Ice Door Kit

4.8 (234)

By: Whirlpool

Part Number: 8201756

The Broken Tab Ice Door Kit is an OEM part for Whirlpool refrigerators. This kit includes all the necessary components to repair or replace the ice door chute, which is responsible for dispensing ice from the ice maker to the ice bucket or directly to the user. The ice door chute must seal properly to prevent warm air from entering the freezer compartment, which can lead to frost and ice buildup.

Symptoms of a failing or broken ice door chute include:

Ice accumulating around the ice dispenser chute
Frost buildup in the freezer compartment
Warm air leaking into the freezer, causing temperature fluctuations
The ice door not closing properly or becoming stuck
Unusual noises from the ice dispenser area

Causes of a broken ice door chute can include regular wear and tear, physical damage from mishandling or excessive force, or deterioration of the sealing components over time.

This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This kit is used if the ice door mounting tabs are broken off of the dispenser wall. If your model number uses this ice door WP2180353 or this ice door kit W10823377 this kit can be used.

Do-It-Yourself Stories from Customers like You Broken hinge tabs for kitchenaid ice dispenser door John H. • Keller , TX • June 13, 2014

I used the Broken Tab Ice Door Kit and the repair was perfect! The ice dispenser works better now than before the door broke. Buy the repair kit, follow the instructions, and here's a few notes from my experience: 1. I initially only removed the broken/fragmented parts of the ice door tab hinges. The metal adapter fits around the existing hinges. 2. I did a few (3 to 4) test fits of the adapter using the hinge pin and door to check for proper alignment. I ended up shaving off a bit of... Read more

Best Seller

Genuine Whirlpool part

Alumilastic Cement

4.9 (17)

By: Whirlpool

Part Number: WP4317852

The Alumilastic Cement is an OEM part for Whirlpool appliances, typically used in refrigerators and freezers. It serves as a thermal mastic compound, designed to provide a secure and heat-conductive bond between various components, such as evaporator coils and the interior walls of the appliance.

Causes of a bad alumilastic cement can include drying out, cracking, or losing its adhesive properties over time. This can occur due to age, exposure to temperature fluctuations, or improper application. When the cement fails, it can lead to poor thermal conductivity and decreased cooling efficiency.

Symptoms of a bad alumilastic cement include:

Reduced cooling performance
Unusual noises from the cooling system
Components becoming loose or detaching
Increased energy consumption

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014

I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!! The do it yourself video was extremely helpful and made the repair very easy. Thanks so much for the great service and quick delivery !!! Read more

Genuine Whirlpool part

Bracket

5.0 (2)

By: Whirlpool

Part Number: WP2303583

Do-It-Yourself Stories from Customers like You Ice maker quit making ice spent over $200 for repairman to come and fix worked for two weeks and quit again Milo K. • Seneca , SC • December 15, 2016

Purchased new ice maker from Appliance Repair and replaced the old ice maker and associated parts that broke during attempted repair on my part. Replaced and is working fine. Read more

Genuine Whirlpool part

Light Lens (Control)

By: Whirlpool

Part Number: WP2223506

This replacement light lens covers and protects the appliance control panel light while diffusing illumination for clearer, less-glare visibility. Restores the control area's appearance and helps ensure even lighting across the panel. What it does:

Protects the control panel light from dust, spills and impact.
Diffuses and directs internal light to reduce glare and improve visibility of controls.
Replaces cracked, discolored or missing lenses that cause uneven or dim lighting.
Helps maintain the original look of the control area and prevents further wear to the light assembly.

What's included: One replacement light lens. Install notes:

Disconnect power to the appliance before starting any repair to avoid shock or injury.
Typically installs behind or over the control panel; may require removing trim or a few fasteners.
Handle the lens carefully to avoid scratching; use a non-abrasive cloth for cleaning.

Genuine Whirlpool part

Support

5.0 (2)

By: Whirlpool

Part Number: WP2301570

Do-It-Yourself Stories from Customers like You Two shelves broke when i cleaned the refrigerator. Robin B. • Barrington , IL • December 26, 2016

Since it was one week before Christmas I thought it a good idea to clean the refrigerator before loading it up for the holiday. However once I was done, I found one shelf frame had cracked,which we super glued. But the deli drawer support was not able to go back in. So I scrambled online to find a solution. Your website was so helpful with the pictures and prior questions and answers that I felt confident I was ordering the right parts. Even ordered a door shelf that had cracked a while... Read more

Genuine Whirlpool part

Support

5.0 (2)

By: Whirlpool

Part Number: WP2301569

Do-It-Yourself Stories from Customers like You Support on deli drawer had all three plastic hooks break. Installation of the new one was a snap! Doyle G. • Durham , NC • January 30, 2021

Looking at uninjured side, it was obvious how to install it. Read more