Ksm150psww Kitchenaid Artisan Mixer Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11396625
Replacement power cord for stand mixers. Connects your mixer to the wall outlet. Replace if frayed, heat-damaged, cracked, or loose for safe operation.
Do-It-Yourself Stories from Customers like You
Bent speed switch and cut power cord Stephanie C. • Hawthorne , FL • September 09, 2018
Took it apart after watching a YouTube video and fixed it with no issues. Works as good as new now
Read more
More
$21.75
- Compare At:
-
$25.88
- You Save:
-
$4.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W11133645
Fix grinding noises and stripped gears in your stand mixer. This pinion drive gear transfers motor power through the gear train for smooth mixing.
Do-It-Yourself Stories from Customers like You
Worn gears shafts and pins in the transmission created too much noise and movement while operating the mixer Kenneth M M. • Manchester , TN • May 31, 2025
Replaced all parts in the transmission.
Read more
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP240285
Drip ring that mounts around the planetary assembly at the base of the mixer head. Covers the gap below the gearcase to restore a clean, finished look.
Do-It-Yourself Stories from Customers like You
Worm gear failure on my KitchenAid 5 qt "professional" lift bowl mixer. Edward B. • Mount Horeb , WI • January 24, 2020
This was a problem that I'd had previously with this mixer. The worm gear, which is designed to fail (so that more serious damage does not occur to the motor), did fail while I was mixing some multi-grain bread dough. After the previous failure (pre-youtube days), I took the machine in for repair. The repair-shop cost came to about $150 in labor. Parts were extra. This time, I decided to do the repair myself, since I figured that I knew what was wrong. I found the appliancepartspros...
Read more
More
$13.60
- Compare At:
-
$16.18
- You Save:
-
$2.58
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400025
Machine screw with 10-24 thread fastens motor housing, gearcase, and internal brackets in stand mixers. Replace stripped or missing screws to restore secure assembly and reduce vibration.
Do-It-Yourself Stories from Customers like You
Kitchenaid mixer did not rotate Robert D. • Las Vegas , NV • November 08, 2018
Watched a you tube video that covered every detail. Identified the problem, showed how to take mixer apart, confirmed the problem, what parts to order and how to reassemble the mixer eliminating potential issues. Overall this DIY was an A plus.
Read more
More
$2.93
- Compare At:
-
$3.14
- You Save:
-
$0.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP240026
Fix a stripped or worn center shaft causing poor mixing or grease leaks. This vertical shaft supports the planetary gears in your stand mixer. DIY repair.
Do-It-Yourself Stories from Customers like You
Stripped center gear Shannon R. • Clay Center , KS • June 22, 2018
Replaced the center gear and since they sent the hub along I replaced that too just to be safe. Used the live chat before ordering to make sure I was ordering the correct part. The person I chatted with was very nice and very helpful and parts came in good shape, and just as ordered. Replaced the stripped gear the next day and added a bunch of grease and the mixer works like new. Was very impressed with their diagrams and helpful videos as well as their large selection of parts. The other...
Read more
More
$13.77
- Compare At:
-
$16.25
- You Save:
-
$2.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3184212
Fix a mixer that won't start or runs intermittently with this brush holder cap. Secures the carbon brush and spring in the motor assembly.
Do-It-Yourself Stories from Customers like You
Motor brush Richard H. • Richton Park , IL • September 02, 2016
Your training film was a lot of help for me. Thanks!!!
Read more
More
$3.07
- Compare At:
-
$3.51
- You Save:
-
$0.44
Genuine Whirlpool part
By: Whirlpool
Part Number: 4162546
Mixer won't run or just hums? Worn motor brushes in the holder cause power loss. This DIY repair restores full motor function on stand mixers.
Do-It-Yourself Stories from Customers like You
20 +year maintenance Michael L. • Santa Ana , CA • December 26, 2015
Checked out You tube video. Easy tune up. One gasket was damaged and I did not notice that the brush holders has no brushes. I believe a quick call to Appliance parts pros will fix this, besides I need a few more parts. I expect to get another 20+ years from this KitchenAide mixer, once repairs are competed. Watch out for the single lock washer located on the rear upper housing screw, you don't want to lose this!
Read more
More
$23.95
- Compare At:
-
$28.26
- You Save:
-
$4.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP240205
Mixer won't turn off or stuck at one speed? This flat spring restores tension to the speed control mechanism. Common fix for speed link issues.
Do-It-Yourself Stories from Customers like You
My Kitchenaid mixer wouldn't turn off, it was stuck on no 2 speed. Eduardo O. • Houston , TX • December 20, 2021
After disassembling the upper half of the mixer, I found out that the Speed-link was broken, the flat spring was missing. Replaced Phase control board, Speed-link and flat spring. Now it works as good as new.
Read more
More
$2.93
- Compare At:
-
$3.14
- You Save:
-
$0.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9709280
Replaces a cracked, broken, or missing control knob on your stand mixer's speed or lock lever. Restores comfortable grip and clean appearance.
Do-It-Yourself Stories from Customers like You
Worn worm gear Ronald M. • Chino Hills , CA • September 07, 2015
As preventative maintenance, replaced worn worm gears and re-greased two units used in a bakery. All grease must be removed if contaminated and replaced. Also, the repair requires snap ring pliers to remove main shaft clip.
Read more
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Whirlpool part
By: Whirlpool
Part Number: W11340106
Fix a stripped or worn planetary gear causing grinding noises or poor mixing. Direct replacement restores smooth operation. Moderate DIY, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Change the planetary gear. Yvan V. • Pembroke Pines , FL • April 13, 2020
Just take it down and install the new one.
Read more
More
$12.92
- Compare At:
-
$14.21
- You Save:
-
$1.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WP116286
If your mixer makes excessive noise or vibrates during operation, a worn spring seat cap may be the cause. This part centers and secures springs for smooth, quiet performance.
Do-It-Yourself Stories from Customers like You
Motor brush Richard H. • Richton Park , IL • September 02, 2016
Your training film was a lot of help for me. Thanks!!!
Read more
More
$2.93
- Compare At:
-
$3.17
- You Save:
-
$0.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP116287
Fix loose or unresponsive mixer buttons with this cap spring. Restores proper tension and reliable engagement. Simple DIY repair in minutes.
Do-It-Yourself Stories from Customers like You
Motor brush Richard H. • Richton Park , IL • September 02, 2016
Your training film was a lot of help for me. Thanks!!!
Read more
More
$2.93
- Compare At:
-
$3.17
- You Save:
-
$0.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP16998
If your stand mixer runs only on high speed or won't change speeds properly, a worn governor drive stud may be the cause. This small repair restores smooth speed control in about 30 minutes.
Do-It-Yourself Stories from Customers like You
Ran on high speed only Bryan D. • Genoa City , WI • February 20, 2017
Replaced speed control parts.
Read more
More
$2.93
- Compare At:
-
$3.14
- You Save:
-
$0.21
Genuine Whirlpool part
By: Whirlpool
Part Number: W11082541
Supports the worm gear shaft for smooth, quiet mixer operation. Replace when you hear grinding noise or experience wobbling during mixing. Confirm fit.
Do-It-Yourself Stories from Customers like You
Worm gear teeth stripped Joni H. • Westminster , CO • January 10, 2015
Took mixer apart and replaced worm gear and worm gear bracket and bearing. Replaced planetary grease to make sure broken teeth didn't cause further damage.
Read more
More
$11.30
- Compare At:
-
$12.43
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10220977
Replacement thread ring for 5-quart glass bowls on stand mixers. Secures the bowl to the mixer base. Replace if cracked, broken, or worn threads.
More
$17.79
- Compare At:
-
$20.99
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WP116241
Replace your mixer's wavy spring washer to reduce vibration and noise. This washer maintains proper tension between shaft components for smoother operation.
More
$2.93
- Compare At:
-
$3.17
- You Save:
-
$0.24