Ksss48qdx058qdw05 Parts

Best Seller

Genuine Whirlpool part

Ice Mold

By: Whirlpool

Part Number: WPW10190929

The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.

You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.

Symptoms of a bad Ice Mold include:

Ice cubes not forming correctly or being irregular in shape
Ice cubes sticking to the mold and not dispensing
The icemaker not producing ice at all
Leaks around the icemaker area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Ice forming in the ice cube bin Bill J. • Scottsdale , AZ • December 13, 2014

I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level. With guidance from the video, I removed the icemaker from the wall of the freezer. The... Read more

$148.95

Compare At:: $175.76
You Save:: $26.81

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Ice Maker Cover

4.9 (10)

By: Whirlpool

Part Number: WPW10289690

This ice maker cover shields the front of the ice maker assembly, protecting the module and moving parts from dust and accidental contact. Replacing a cracked or missing cover restores a clean, finished appearance and keeps components protected.

Shields the ice maker's front components and control module
Helps keep dust, splashes, and debris out of the mechanism
Prevents accidental contact with moving ejector parts
Replace if the cover is cracked, warped, missing, or will not stay attached

What's included: 1 ice maker cover Install notes:

Unplug the refrigerator before servicing
Access the ice maker in the freezer compartment
Carefully release the retaining tabs and remove the old cover; note orientation
Align the new cover and press until it snaps securely into place—do not force the tabs

Do-It-Yourself Stories from Customers like You Ice maker quit working Peter S. • Lawton , MI • October 29, 2015

Replaced icemaker and shutoff arm. Easy project. Read more

$8.36

Compare At:: $9.95
You Save:: $1.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Fill Cup & Bearing Assembly (Icemaker)

4.9 (17)

By: Whirlpool

Part Number: WP628356

This icemaker fill cup and bearing assembly directs water from the inlet tube into the ice mold and provides the pivot point for the shutoff arm. Replacing a cracked or missing cup helps stop leaks, misdirected fills, and inconsistent ice production.

Channels incoming water into the ice mold to prevent splashing and overfilling
Provides the pivot/bearing for the ice level (shutoff) arm
Helps maintain consistent cube size and reliable icemaker shutoff
Typical symptoms: water or ice buildup under the icemaker, overfilling or hollow/irregular cubes, or a loose/binding shutoff arm

What's included: 1 fill cup and bearing assembly Install notes:

Unplug the refrigerator and shut off the water supply before servicing
Remove the ice bin and detach the icemaker to access the side-mounted cup
Position the new cup directly under the fill tube; secure with existing hardware and verify the shutoff arm pivots freely in the bearing
Restore power and water; run a test fill and check for leaks

This part fixes the following symptoms

Ice maker dispenses too much ice
Leaking
Ice maker not making ice

Do-It-Yourself Stories from Customers like You Broken part Eva H. • Walnut Creek , CA • March 23, 2014

Watched online video and worked along - it was easy and quick - I was amazed! Read more

$32.42

Compare At:: $38.58
You Save:: $6.16

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Motor Coupling

5.0 (14)

By: Whirlpool

Part Number: WPW10169511

The Motor Coupling is an OEM part for Whirlpool refrigerators. This coupling connects the ice dispenser motor to the ice dispensing mechanism, allowing the motor to drive the ice auger and dispense ice effectively.

Causes of a bad motor coupling can include wear and tear from regular use, overloading the ice dispenser, or mechanical failure of the dispenser motor.

Symptoms of a bad motor coupling include:

The ice dispenser not functioning or dispensing ice intermittently
Unusual noises such as grinding, clicking, or rattling during operation
The ice auger not turning or dispensing ice properly
Visible cracks, breaks, or wear on the coupling

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Ice maker won't dispense ice

Do-It-Yourself Stories from Customers like You Ice dispenser did not work Magic P. • Riverdale , GA • January 22, 2015

I first thought it was the auger in the ice container so I changed it and it was not the problem. I then talked to ApplianceParts customer service that it might be the yoke on the motor that turned the auger or even the motor itself even though it worked. I ordered the parts, the yoke was supposed to be able to be changed by itself but mind would not come off the motor shaft so I had to cut it off just to remove it from the unit so I had to change the motor anyway because of this. So I advise... Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Ice Dispenser Motor

4.7 (6)

By: Whirlpool

Part Number: WP2188242

The Ice Dispenser Motor is an OEM part for Whirlpool refrigerators. This motor powers the mechanism that dispenses ice from the refrigerator’s ice maker, ensuring a smooth and reliable delivery of ice cubes or crushed ice to the user.

Causes of a bad ice dispenser motor can include electrical issues, excessive use, or mechanical failure due to wear and tear.

Symptoms of a bad ice dispenser motor include:

The ice dispenser not dispensing ice
Unusual noises coming from the dispenser area
The motor not activating when the dispenser lever is pressed
Inconsistent or intermittent dispensing of ice

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ice dispenser would not dispense ice Robert Y. • Honolulu , HI • March 13, 2014

The auger would not turn the dispenser because the screw threads were stripped. I could not re-thread it so I had to replace the entire motor assembly. The video your company provided was extremely helpful not only for fixing the problem but to give me the confidence to do it myself. It was a very detailed video that included all the safety instructions. Read more

$158.46

Compare At:: $188.57
You Save:: $30.11

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Defrost Thermostat

4.8 (5)

By: Whirlpool

Part Number: WP4387499

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. The thermostat monitors the temperature of the evaporator coil and signals the defrost heater to turn on or off to prevent frost buildup, ensuring efficient cooling.

Causes of a bad defrost thermostat can include wear and tear over time, exposure to extreme temperatures, or electrical malfunctions.

Symptoms of a bad defrost thermostat include:

Excessive frost buildup in the freezer
The refrigerator not maintaining the correct temperature
The defrost heater not activating
The refrigerator running continuously or not running at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Well we did not know what the problem was at first! refridgerator was warming up Michaela S. • Rochester , WA • June 06, 2015

Watched a few of your well put together videos and could not afford a new Refrigerator right now because it was a built in so decided with the frost on the bottom of the freezer grill and the Refrigerator warming up decided to replace the Heater Element and Thermostat Defrost which took some time but so far so good lets hope that is all that is needed saved over 10,000.00 dollars for a new 48" built in for now! Thank you for your rushed order and videos I think you are a life saver got the part... Read more

$54.34

Compare At:: $64.66
You Save:: $10.32

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Ice Bin Baffle (Auger Support)

4.9 (18)

By: Whirlpool

Part Number: W10852691

This baffle sits in the ice bin and supports the auger so ice feeds smoothly to the dispenser. Replace a cracked or worn baffle to restore reliable dispensing and reduce jams or grinding from the ice bucket.

Supports and aligns the ice auger inside the bin
Guides cubes/crushed ice toward the crusher/dispenser
Helps prevent auger wobble, binding, or excessive noise
Failure can show as weak/no ice dispensing or intermittent jams

What's included: 1 baffle Install notes:

Disconnect power; remove the ice bin from the freezer/door
Empty the bin and remove any screws/clips securing the baffle
Transfer any reusable hardware; orient the baffle correctly around the auger
Tighten fasteners without overtightening; reinstall bin and test dispense

Do-It-Yourself Stories from Customers like You The ice crusher mechanism on my ice maker wasn't working properly i was getting bits of white plastic in my ice so obviously something was broken in there Tawna M. • Orem , UT • July 27, 2015

I found a video/tutorial on how to take it apart to see what was pieces were broken, then ordered the replacement parts and watched the video to put it back together again. Read more

$25.95

Compare At:: $30.62
You Save:: $4.67

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.8 (6)

By: Whirlpool

Part Number: WP681414

Specs: 10-16 x 1/2 inch.

Do-It-Yourself Stories from Customers like You Dryer drum was beginning to stall occasionally Dana J E. • San Marcos , CA • March 17, 2015

After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap... Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.7 (6)

By: Whirlpool

Part Number: WP489478

Size: 8 x 1/2 ab.

Do-It-Yourself Stories from Customers like You Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014

Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Compression Nut - 1/4 Inch

5.0 (4)

By: Whirlpool

Part Number: WP627018

Size: 1/4 inch. Nut for plastic water line.

Do-It-Yourself Stories from Customers like You Broken y connector off of water valve on amana refridgerator Greg S. • El Dorado Hills , CA • October 19, 2014

Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks. Read more

$11.95

Compare At:: $14.34
You Save:: $2.39

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Thermostat Barrier

5.0 (1)

By: Whirlpool

Part Number: WP1113466

This part shields and positions the temperature control's sensing bulb inside the control housing, helping the control respond accurately and keep cabinet temperatures stable. Replace a cracked, deformed, or missing barrier to restore consistent, predictable cooling. What it does:

Shields the cold-control thermostat/capillary bulb from direct airflow
Helps the temperature control sense average compartment temperature and cycle correctly
Supports steady temperatures and normal run times
A damaged or missing barrier may contribute to temperature swings or frequent control adjustments

What's included:

1 thermostat barrier

Install notes:

Disconnect power before servicing
Access the control housing; remove the dial/cover and any retaining screws or clips
Note the factory routing of the thermostat capillary; install the barrier without kinking or sharply bending the sensor tube
Reassemble, set controls to mid-range, and allow up to 24 hours for temperatures to stabilize

Do-It-Yourself Stories from Customers like You Bad thermostat Simon B. • Monsey , NY • September 23, 2019

Very easy when you get the right part Read more

$140.72

Compare At:: $167.46
You Save:: $26.74

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Power Disconnect Switch

5.0 (1)

By: Whirlpool

Part Number: WP2266802

This Power Disconnect Switch is the refrigerator's on/off service switch. It interrupts incoming power when actuated, allowing safe servicing or resetting of the unit without unplugging it and helping prevent unintended operation when access panels are open. What it does:

Interrupts electrical power to the unit when switched off or tripped
Provides a dedicated service disconnect for safe maintenance and resets
Common symptoms: no power, intermittent shutdowns, or the unit won't stay on unless the switch is held/positioned
Visual clues: broken actuator or heat-discolored/loose terminals

What's included:

Power disconnect switch only

Install notes:

Disconnect power at the breaker before servicing
Access the switch location; on many built-in units it's behind the top grille or control panel
Move wires one at a time to the new switch to maintain correct orientation
Restore power and verify the switch cleanly turns the unit on and off

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Switch was damaged Michael K. • Burbank , CA • April 07, 2015

Replace old damaged switch with new one ordered new part on Friday came by FEDEX next day (Saturday) works great thanks :) Read more

$48.95

Compare At:: $58.25
You Save:: $9.30

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Door Gasket (Refrigerator)

5.0 (2)

By: Whirlpool

Part Number: 2188319A

This flexible perimeter seal fits around the refrigerator door to keep cold air in and humid air out. Replacing a worn gasket restores a tight closure, stabilizes temperatures, and helps reduce frost, condensation, and energy waste. What it does:

Seals the gap between the door and cabinet to prevent air leaks
Helps maintain proper internal temperature and humidity
Reduces frost and condensation caused by warm-air infiltration
Corrects: visible gaps, torn/cracked gasket, door not sealing or popping open, excess moisture or frost

What's included:

1 refrigerator door gasket

Install notes:

Unplug the refrigerator before starting
Lay the new gasket flat and warm it (warm water or low heat) to relax folds
Remove the old gasket and clean the sealing surface/channel thoroughly
Install starting at the corners, ensure the gasket is fully seated and evenly contacting the cabinet; adjust door alignment if needed

Do-It-Yourself Stories from Customers like You Gasket door was bad and door was not closing seal tight against frame Claude A. • Miami Lakes , FL • August 25, 2015

I bought a new gasket. I followed carefully the instructions given on the installation video and every thing went well. Door is sealing much better and my temperature went further down under 20F reaching close to 0F which was impossible before. Read more

$148.54

Compare At:: $178.25
You Save:: $29.71

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Drier

5.0 (2)

By: Whirlpool

Part Number: WPW10143759

Do-It-Yourself Stories from Customers like You Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017

Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more

$28.23

Compare At:: $33.59
You Save:: $5.36

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Egg Container

5.0 (10)

By: Whirlpool

Part Number: W10136387A

Color: clear. It measures about 6 inches wide by 3-1/2 inches high by 15 inches deep.

Do-It-Yourself Stories from Customers like You Missing egg case for frig Laura W. • Coupeville , WA • June 19, 2016

I got online and found the egg carton case for my refrigerator - ordered it - it arrived and was exactly what I wanted. Online shopping is AMAZING!! Read more

$11.34

Compare At:: $13.49
You Save:: $2.15

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

By: Whirlpool

Part Number: W11474472

The Screw is an OEM part for Whirlpool refrigerators. This screw plays a small but important structural role, securely fastening the refrigerator door hinges in place.

Causes of a bad screw include normal wear and tear, repeated door opening/closing stress, or accidental damage during cleaning or servicing of the hinge area.

Symptoms of a bad hinge screw include:

Loose or sagging door that does not close or seal properly
Increased vibration or noise from the hinge area
Difficulty opening/closing the door smoothly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Ksss48qdx058qdw05 Parts

Ice Mold

Ice Maker Cover

Fill Cup & Bearing Assembly (Icemaker)

Motor Coupling

Ice Dispenser Motor

Defrost Thermostat

Ice Bin Baffle (Auger Support)

Screw

Screw

Compression Nut - 1/4 Inch

Thermostat Barrier

Power Disconnect Switch

Door Gasket (Refrigerator)

Drier

Egg Container

Screw