Kuds01dlsp5 Parts

The Door Balance Spring is an OEM part for Whirlpool dishwashers. This part provides tension and balance to the dishwasher door, ensuring it opens and closes smoothly and stays in the desired position when loading or unloading dishes.  

Causes of damage to the door balance spring can include normal wear and tear from frequent use, corrosion due to moisture and detergent exposure, or mechanical failure from excessive force being applied to the door.  

Symptoms of a bad Door Balance Spring include:

• The dishwasher door falling open too quickly or with too much force 
• Difficulty in keeping the door open or having it snap shut unexpectedly 
• A noticeable difference in the effort required to open or close the dishwasher door 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Door Latch Handle is an OEM part for Whirlpool dishwashers. It ensures that the dishwasher door closes securely, enabling the machine to operate correctly. This handle engages the latch mechanism, providing a tight seal to prevent leaks and allowing the dishwasher to run its cycles efficiently.

Over time, the door latch handle can wear out or break due to frequent use, exposure to harsh detergents, or mechanical failure. Causes of a bad door latch handle include physical damage, internal component wear, or misalignment.

Symptoms of a bad door latch handle include:

• Difficulty in closing or latching the dishwasher door
• The dishwasher not starting or stopping mid-cycle
• Leaks around the door during operation
• The handle feeling loose or not engaging properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Toe Panel Insulation is an OEM part for Whirlpool dishwashers. This part was designed to enhance the appliance's performance by reducing noise and preventing heat escape from the bottom of the dishwasher. This insulation panel fits snugly behind the dishwasher's toe panel, which is located at the lower front part of the unit. 

Causes of a bad Toe Panel Insulation might include wear and tear over time, damage during appliance installation or removal, or deterioration due to moisture exposure. 

Symptoms of inadequate or damaged Toe Panel Insulation include:

• Noticeable increase in noise level from the dishwasher, making it more disruptive during its operation.
• Excess heat felt near the base of the dishwasher, indicating heat loss.
• Potential for condensation or slight temperature changes in the kitchen due to the heat emitted from the dishwasher.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

• Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
• A desire to refresh or update the appearance of the appliance without the need for complete replacement
• Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Impeller is an OEM part for Whirlpool dishwashers. It plays a crucial role in the dishwasher's operation by creating the water pressure needed to circulate water through the spray arms, ensuring dishes are thoroughly cleaned during the wash cycle.

Over time, the impeller can become worn or damaged due to regular use, the presence of debris, or exposure to harsh detergents. This can result in decreased water pressure and ineffective cleaning.

Symptoms of a bad impeller include:

• Poor cleaning results with dishes remaining dirty
• Unusual noises coming from the dishwasher
• Low water pressure or weak spray from the spray arms
• The dishwasher not completing its cycle properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

• Visible scratches or chips on the appliance surface
• Areas of exposed metal prone to rust
• Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Fill Hose is an OEM part for Whirlpool dishwashers. This hose is responsible for delivering water from your home’s water supply to the dishwasher during the wash cycles. It ensures that the appliance receives the necessary amount of water to clean dishes effectively.

Over time, the fill hose can become damaged due to wear and tear, exposure to high water pressure, or kinks and bends that restrict water flow. If the hose is compromised, it can lead to water supply issues or leaks, impacting the dishwasher’s performance.

Symptoms of a bad fill hose include:

• Water not entering the dishwasher
• Leaks or puddles around or under the dishwasher
• Error codes related to water supply issues
• Visible cracks, kinks, or damage to the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Switch is an OEM part for Whirlpool dishwashers. It plays a crucial role in ensuring the dishwasher operates only when the door is securely closed. The switch signals the control board that the door is shut, allowing the wash cycle to begin safely.

You should replace the door switch if it becomes faulty or damaged. Causes of a bad door switch can include wear and tear from regular use, electrical issues, or physical damage from forceful closing of the door.

Symptoms of a bad door switch include:

• The dishwasher not starting or stopping mid-cycle
• Error codes related to the door latch or door switch
• The dishwasher operating with the door open (safety issue)
• No response when pressing the start button

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Check Valve is an OEM part for Whirlpool dishwashers. This small but crucial component prevents backflow of water into the dishwasher, ensuring that dirty water is properly drained and does not contaminate clean dishes. It plays a vital role in maintaining the efficiency and hygiene of the dishwasher by directing water flow correctly during the wash and drain cycles.

Causes of a bad check valve can include blockages from food particles, mineral deposits from hard water, or wear and tear over time. These issues can impede the valve's function, leading to ineffective drainage and potential backflow problems.

Symptoms of a bad check valve include:

• Water not draining properly from the dishwasher
• Dirty water pooling at the bottom of the dishwasher
• Unpleasant odors from standing water
• Residue or food particles left on dishes after a wash cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Upper Dish Rack is an OEM replacement part  for Whirlpool dishwashers. Located on the upper level inside the tub, it provides an area for washing smaller dishes, utensils, and glasses. 

Causes of a bad upper dish rack can include warping or cracking of plastic materials from prolonged use or excess weight loads. Mineral buildup over time may cause rack shelves to become rigid.

Symptoms include:

• Inability to fit or hold delicate items securely  
• Dishes or glassware falling or shifting during rotation
• Food particles or residue collecting on lower surfaces
• Loose or misaligned rack shelves that don't dry properly

Compatible models include Maytag, Amana, KitchenAid, and select Kenmore dishwashers.

The Pump and Motor Assembly is an OEM part for Whirlpool dishwashers. This assembly is responsible for circulating water through the dishwasher during the wash cycle, ensuring that dishes are thoroughly cleaned.

Over time, the pump and motor assembly can fail due to wear and tear, debris buildup, or electrical issues. Regular use, along with exposure to hard water, can cause the components to degrade, leading to performance problems.

Symptoms of a bad pump and motor assembly include:

• Dishes not being cleaned properly
• Unusual noises during the wash cycle
• Water not draining from the dishwasher
• Error codes indicating pump or motor issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Air Inlet is an OEM part for Whirlpool dishwashers. This component allows fresh air to enter the dishwasher during the drying cycle, helping to reduce moisture and improve the efficiency of the drying process. By introducing outside air, the air inlet aids in removing humidity from inside the dishwasher, ensuring dishes come out dry and free from water spots.

Causes of a bad air inlet can include clogging from debris or mineral deposits, damage from regular wear and tear, or mechanical failures within the part itself. A faulty air inlet can lead to poor drying performance and increased moisture inside the dishwasher.

Symptoms of a bad air inlet include:

• Dishes remaining wet after the drying cycle
• Increased humidity inside the dishwasher after the cycle is complete
• Water spots on dishes and glassware
• Unusual noises during the drying cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Silverware Basket is an OEM part for Whirlpool dishwashers. This basket is essential for organizing and securing silverware and other utensils during the wash cycle, ensuring they are thoroughly cleaned and protected. 

The causes for the replacement of the silverware basket can include normal wear and tear from daily use, exposure to high temperatures and aggressive cleaning chemicals, or physical damage from loading and unloading utensils.

Symptoms of a malfunctioning Silverware Basket include:

• Cracks or breaks that allow silverware to fall through or hinder proper placement.
• Wear or damage that prevents the basket from fitting securely in its designated spot.
• Holes or gaps that are too large, resulting in utensils slipping out during the cycle.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Heating Element is an OEM replacement part for Whirlpool dishwashers. It safely generates heat to sanitize dishes and raise water temperatures during hot drying cycles. A functioning heating element ensures thorough cleaning and reduces the risk of damage from moisture left behind.

Causes of a bad heating element usually relate to standard wear and deterioration of wiring insulation or coil materials after extended usage cycles. Surface scale can obstruct heat transfer if not periodically removed.

Symptoms of a bad heating element include:

• Dishes not getting fully dry
• Moisture remaining in low areas after cycles
• Inability to select high-temperature settings
• Cycles that don't reach the required sanitization temps

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

The Filter Assembly is an OEM part for Whirlpool dishwashers. This component is responsible for trapping food particles and debris, preventing them from recirculating during the wash cycle and ensuring that dishes come out clean. 

Causes of a bad filter assembly can include accumulated debris, regular wear from repeated use, or damage from harsh cleaning agents. A compromised filter can reduce the dishwasher’s cleaning performance and lead to buildup inside the machine.

Symptoms of a bad filter assembly include:

• Dishes not being cleaned properly
• Unusual noises during the wash cycle
• Slow drainage or standing water in the dishwasher
• Visible damage or clogging of the filter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.