Mah5500bww 25001052 Parts

I was able to find the parts and when they arrived, the replacement took just a few minutes. Read more

Did not know if these were the right parts. I believe i talked to someone named Robin and she was very helpful and friendly. Said she wasn't sure these were the parts since they were not listed on my model number but said if they didn't work i could send them back. been to many parts stores and nobody could find these two items or even suggest them. Very good employee who helped me. Was really surprised how fast my order got here. Excellent service. I've bookmarked your site and will be doing... Read more

Ordered boot watched video had no trouble finding ,parts easily entered part num,no problems at all Read more

• Marks left on clothes

I used the instructions from some of your previous customers. When I was ready to pull the inner tub from the outer tub, it pulled very hard. The front bearing had been HOT and really marked the shaft. The SEAL appeared to be almost plastic, not much left. I removed the seal from the Front bearing. This model had the original type seal with the plastic spacer behind the seal and in front of the front bearing.. BE SURE TO NOTE HOW THE PLASTIC SPACER CAME OUT--feet on spacer toward the... Read more

Busted unit open, found leaks, ordered parts. Cleaned out the mess, put new parts in, works like a champ! Easy as it can get! Read more

*GREAT! *Parts arrived quickly and the job was fairly simple to complete. Thank you! Read more

Initially replaced the pump. However, I believe the pump went bad due to the pressure switch failing and allowing the pump to run continuously. Once I replaced the pressure switch everything was fine. FYI, the wiring harness on my washer was slightly different and would not align to t the tabs on the new switch. I had to remove the black harness guide on top of the switch and just align the harness wires to the tabs manually. My ground wire was separate from the harness. I just plugged it... Read more

Washer failed one night, gushing 15+ gallons of water across the floors. Called appliance service company out to take a look at it. Service rep. determined problem was drain pump and/or pressure switch. But because our washer was over 10-12yrs old, he claimed that parts were no longer available and we'd need to buy another washer. I went online to Appliance Parts Pros the next day, found the parts, watched their helpful DIY videos and ordered the parts. When the parts arrived the next day... Read more

I had watched some videos on youtube to understand how to disassemble & gain access to the various washer components & their location. Very easy. I had first replaced the wax motor, but that was not the problem. I reviewed the diagnostic procedures that were present near the control board, followed the directions to remove the main plug from the motor control board, which should allow the washer to spin at 50 rpm. No spin, & upon closer inspection, I observed that one of the phase drive... Read more

Ordered new baffle and the proper screws with help from appliance parts pros. Took washer apart. Removed soap dispenser cover, washer door, front, lifted top lid, removed seal to be able to access area to get screws in and tightened with a wrench. This part wasn't the easiest as there wasn't much room for my hand(s) to fit in, but just took my time and got it done. Read more