Maytag Mvw8450wq0 Parts

Includes connector and both clamps.

This set of washer fill hoses connects your home's hot and cold water supply to the washer's inlet valves. Replacing aging hoses helps prevent leaks and ensures the washer fills properly for every cycle.

• Supplies hot and cold water from household faucets to the washer's inlet valves
• Helps address leaks, bulges, or cracks in old hoses
• Can resolve drips at fittings and water on the floor
• Improve slow or no-fill issues caused by kinks or internal blockages

• Unplug the washer and turn off both water supplies before starting
• Place a towel or pan to catch residual water; disconnect old hoses from faucets and inlet valves
• Attach new hoses to the correct hot/cold connections; tighten connections securely without overtightening
• Open valves, check for leaks at both ends, and re-tighten if needed

Contains two, six foot long braided hoses with 90 degree ends.

Suspension rod ball and bushing kit includes 4 balls and 4 bushings.

This replacement nut is a small hardware fastener used to secure components inside your appliance. It helps keep parts tight and properly aligned so assemblies don't loosen from vibration or normal operation.

• Threads onto a mating bolt, stud, or shaft to clamp parts together
• Maintains alignment and reduces movement and rattling
• Replaces a stripped, missing, or damaged nut to restore a secure fit
• Common signs of failure: loose panels or components, unusual vibration/noise, hardware missing

• Disconnect power; shut off gas and/or water if applicable before servicing
• Note the original hardware stack-up (washers/spacers) and orientation for reassembly
• Start by hand to avoid cross-threading; tighten to manufacturer guidance—do not overtighten
• Replace any damaged washers or locking devices

This replacement detergent dispenser assembly mounts in the dishwasher door and releases detergent at the correct time in the cycle to help ensure thorough cleaning and consistent wash results. What it does:

• Holds and seals detergent until the control signals it to open
• Releases detergent into the tub for proper wash performance
• Common failure symptoms: detergent left in cup, dispenser door won't latch or open, leaks around the dispenser area, or poor cleaning due to no detergent release

• One detergent dispenser assembly

• Disconnect power and turn off water supply before servicing
• Remove the inner door panel to access the dispenser retainers
• Release the old dispenser, transfer any electrical connector(s), and seat the new dispenser evenly to ensure a watertight seal
• Reassemble, run a short cycle, and check for leaks around the dispenser

This nozzle assembly directs fresh water for the refrigerator's fresh-fill function, restoring controlled filling and helping prevent leaks and drips. Replace a damaged nozzle to restore reliable water dispensing. What it does:

• Directs and meters fresh water flow during the refrigerator's fill cycle.
• Helps prevent water from spraying or dripping away from the intended fill area.
• Common symptoms for replacement: visible leaks, dripping after fills, inconsistent or no water during fill cycles.
• Interfaces with the fridge water tubing and fill valve to deliver proper flow.

• Disconnect power to the appliance before starting any repair.
• Shut off the water supply and drain residual water to avoid spills.
• Replace using basic hand tools; ensure proper seating and secure connections to avoid leaks.

Color: White

4 - Position Switch

This control knob replaces a worn or broken knob so you can reliably set and adjust your appliance's settings again. It restores a smooth, positive feel and clear pointer alignment for everyday use.

• Selects and adjusts the matching control (such as burner, temperature, or function) on the appliance
• Worn, cracked, or missing knob can make settings hard to change or read
• Loose or slipping knob may prevent the control shaft from turning properly
• Cosmetic damage can detract from the appliance's appearance

• Disconnect power and allow hot surfaces to cool before servicing
• Pull the old knob straight off the control shaft; do not twist against stops
• Align the flat or D-shaped opening with the shaft and press firmly until seated
• If the knob won't seat, inspect the shaft for damage or debris before reinstalling

Size: 8 foot long. This external washer drain hose is needed when there is more distance between the washer and the drain. Note: comes with 1.5" diameter clamp but hose is 1.25" in diameter; therefore you may need to order the 1.25" diameter clamp separately: WP356138

Size: 29 1/4 inches x 31 1/4 inches. This universal washer drip tray is large enough for duet washers and sits under the washer to protect your floors from scuffs, spill, etc. Includes a PVC drain fitting.

Used from harness to top.

This replacement filter captures airborne grease and cooking particles from the vent system. It helps protect the blower and ducting and keeps airflow efficient so your hood or microwave-hood can clear smoke and odors more effectively. What it does:

• Traps grease and food particles to reduce buildup inside the vent path
• Helps maintain proper airflow and ventilation performance
• Replace when torn, warped, heavily saturated, or won't stay seated
• Common symptoms: lingering odors or smoke, greasy residue near the cooktop, visible damage to the filter

• 1 filter

• Disconnect power and allow the appliance and filters to cool before servicing
• Release the retaining tabs or latch and remove the old filter
• Seat the new filter fully and secure per your user guide
• Do not operate the appliance without all required filters installed

Right hand side. For screws use WPW10119828.

This is the appliance's water inlet valve. It controls and opens the water supply to the unit at the correct times so cycles can fill properly and dispense water where needed.

• Regulates incoming water flow to the appliance
• Can address no water to ice maker or dispenser
• May correct humming or buzzing from a stuck solenoid

• Disconnect power and shut off the water supply before servicing
• Keep a towel handy; a small amount of residual water may spill
• Transfer any mounting hardware or fittings from the old valve if required
• After installation, restore water, check for leaks, then test operation